Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 2 port/baudrate candidates: /dev/ttyACM1@115200, /dev/ttyACM0@115200
Trying port /dev/ttyACM1, baudrate 115200
Connecting to port /dev/ttyACM1, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xaabfb490, open=True>(port='/dev/ttyACM1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: start
Changing monitoring state from "Detecting serial connection" to "Operational"
Send: N0 M110 N0*125
Recv: echo: External Reset
Recv: Marlin 1.1.9-bbp
Recv: 
Recv: echo: Last Updated: 2018-12-31 | Author: (Connor Mckeown, E3D BigBxo Pro)
Recv: echo:Compiled: Feb  5 2023
Recv: echo: Free Memory: 3052  PlannerBufferBytes: 1488
Recv: echo:Hardcoded Default Settings Loaded
Recv: echo:  G21    ; (mm)
Recv: echo:  M149 C ; Units in Celsius
Recv: 
Recv: echo:Filament settings: Disabled
Recv: echo:  M200 D1.75
Recv: echo:  M200 T1 D1.75
Recv: echo:  M200 D0
Recv: echo:Steps per unit:
Recv: echo:  M92 X164.01 Y185.56 Z1630.99
Recv: echo:  M92 T0 E393.68
Recv:   M92 T1 E407.32
Recv: echo:Maximum feedrates (units/s):
Recv: echo:  M203 X200.00 Y200.00 Z10.00
Recv: echo:  M203 T0 E50.00
Recv:   M203 T1 E50.00
Recv: echo:Maximum Acceleration (units/s2):
Recv: echo:  M201 X1000 Y1000 Z10
Recv: echo:  M201 T0 E10000
Recv:   M201 T1 E10000
Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo:  M204 P1000.00 R5000.00 T1000.00
Recv: echo:Advanced: Q<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
Recv: echo:  M205 Q20000 S0.00 T0.00 X8.00 Y8.00 Z0.30 E5.00
Recv: echo:Home offset:
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:Hotend offsets:
Recv: echo:  M218 T1 X38.00 Y0.00
Recv: echo:Auto Bed Leveling:
Recv: echo:  M420 S0 Z0.00
Recv: echo:Material heatup parameters:
Recv: echo:  M145 S0 H220 B60 F0
Recv: echo:  M145 S1 H240 B120 F0
Recv: echo:PID settings:
Recv: echo:  M301 P24.01 I1.81 D79.67
Recv: echo:  M304 P336.00 I61.00 D462.40
Recv: echo:Z-Probe Offset (mm):
Recv: echo:  M851 Z-1.75
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin 1.1.9-bbp (metjaack/marlin-bigboxpro) SOURCE_CODE_URL:https://github.com/metajack/marlin-bigboxpro PROTOCOL_VERSION:1.0 MACHINE_TYPE:BigBox Hybrid Pro EXTRUDER_COUNT:2 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Recv: Cap:SERIAL_XON_XOFF:0
Recv: Cap:EEPROM:0
Recv: Cap:VOLUMETRIC:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRESS:0
Recv: Cap:PRINT_JOB:1
Recv: Cap:AUTOLEVEL:1
Recv: Cap:Z_PROBE:1
Recv: Cap:LEVELING_DATA:1
Recv: Cap:BUILD_PERCENT:1
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: Cap:AUTOREPORT_SD_STATUS:0
Recv: Cap:THERMAL_PROTECTION:1
Recv: ok
Send: M21
Recv: echo:SD init fail
Recv: ok
Send: M155 S2
Recv: ok
Send: M105
Recv: ok T:25.31 /0.00 B:21.50 /0.00 T0:25.31 /0.00 T1:24.14 /0.00 @:0 B@:0 @0:0 @1:0
Recv:  T:25.23 /0.00 B:21.44 /0.00 T0:25.23 /0.00 T1:23.44 /0.00 @:0 B@:0 @0:0 @1:0