2020-11-17 21:44:16,998 - Changing monitoring state from "Offline" to "Detecting serial connection"
2020-11-17 21:44:17,058 - Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2020-11-17 21:44:17,061 - Trying port /dev/ttyUSB0, baudrate 115200
2020-11-17 21:44:17,064 - Connecting to port /dev/ttyUSB0, baudrate 115200
2020-11-17 21:44:17,073 - Handshake attempt #1 with timeout 2.0s
2020-11-17 21:44:17,079 - Send: N0 M110 N0*125
2020-11-17 21:44:17,080 - Connected to: Serial<id=0x6beea830, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-11-17 21:44:17,317 - Recv: start
2020-11-17 21:44:17,322 - Changing monitoring state from "Detecting serial connection" to "Operational"
2020-11-17 21:44:17,375 - Recv: echo: External Reset
2020-11-17 21:44:17,383 - Send: N0 M110 N0*125
2020-11-17 21:44:17,401 - Recv: Marlin
2020-11-17 21:44:17,406 - Recv: echo: Last Updated: 2015-12-01 12:00 | Author: (Ender-5)
2020-11-17 21:44:17,415 - Recv: Compiled: Oct 19 2018
2020-11-17 21:44:17,424 - Recv: echo: Free Memory: 9550  PlannerBufferBytes: 1232
2020-11-17 21:44:17,450 - Recv: echo:V21 stored settings retrieved (380 bytes)
2020-11-17 21:44:17,457 - Recv: echo:Steps per unit:
2020-11-17 21:44:17,569 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E92.64
2020-11-17 21:44:17,576 - Recv: echo:Maximum feedrates (mm/s):
2020-11-17 21:44:17,583 - Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
2020-11-17 21:44:17,586 - Recv: echo:Maximum Acceleration (mm/s2):
2020-11-17 21:44:17,590 - Recv: echo:  M201 X500 Y500 Z100 E1000
2020-11-17 21:44:17,596 - Recv: echo:Accelerations: P=printing, R=retract and T=travel
2020-11-17 21:44:17,604 - Recv: echo:  M204 P500.00 R500.00 T500.00
2020-11-17 21:44:17,607 - Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
2020-11-17 21:44:17,609 - Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Z0.40 E10.00
2020-11-17 21:44:17,611 - Recv: echo:Home offset (mm):
2020-11-17 21:44:17,613 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-11-17 21:44:17,615 - Recv: echo:Material heatup parameters:
2020-11-17 21:44:17,619 - Recv: echo:  M145 M0 H185 B0 F0
2020-11-17 21:44:17,621 - Recv: echo:  M145 M1 H240 B0 F0
2020-11-17 21:44:17,624 - Recv: echo:PID settings:
2020-11-17 21:44:17,627 - Recv: echo:  M301 P22.20 I1.08 D114.00 C100.00 L20
2020-11-17 21:44:17,629 - Recv: echo:Filament settings: Disabled
2020-11-17 21:44:17,630 - Recv: echo:  M200 D3.00
2020-11-17 21:44:17,633 - Recv: echo:  M200 D0
2020-11-17 21:44:19,009 - Recv: echo:SD card ok
2020-11-17 21:44:19,028 - Recv: Init power off infomation.
2020-11-17 21:44:19,031 - Recv: size:
2020-11-17 21:44:19,035 - Recv: 591
2020-11-17 21:44:19,039 - Recv: init valid:
2020-11-17 21:44:19,044 - Recv: 0
2020-11-17 21:44:19,050 - Recv: 0
2020-11-17 21:44:19,055 - Recv: ok
2020-11-17 21:44:19,062 - Send: N1 M115*39
2020-11-17 21:44:19,111 - Recv: FIRMWARE_NAME:Marlin 1.1.0-RC3 From Archive SOURCE_CODE_URL:http:// ... PROTOCOL_VERSION:1.0 MACHINE_TYPE:www.creality3d.cn EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2020-11-17 21:44:19,124 - Recv: ok
2020-11-17 21:44:19,128 - Send: M21
2020-11-17 21:44:19,147 - Recv: echo:SD card ok
2020-11-17 21:44:19,150 - Recv: ok
2020-11-17 21:44:19,169 - Send: M20
2020-11-17 21:44:19,176 - Recv: Begin file list
2020-11-17 21:44:19,183 - Recv: CE3_TA~1.GCO
2020-11-17 21:44:19,188 - Recv: CE3_CU~1.GCO
2020-11-17 21:44:19,191 - Recv: End file list
2020-11-17 21:44:19,199 - Recv: ok
2020-11-17 21:44:19,443 - Send: G91
2020-11-17 21:44:19,462 - Recv: ok
2020-11-17 21:44:19,466 - Send: G28 X0 Y0
2020-11-17 21:44:20,424 - Recv: ok
2020-11-17 21:44:20,434 - Send: G90
2020-11-17 21:44:20,443 - Recv: ok
2020-11-17 21:44:21,930 - Send: G91
2020-11-17 21:44:21,957 - Recv: ok
2020-11-17 21:44:21,965 - Send: G28 Z0
2020-11-17 21:45:11,961 - No response from printer after 6 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-11-17 21:45:11,987 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2020-11-17 21:45:12,017 - Connection closed, closing down monitor
2020-11-17 21:45:46,559 - Changing monitoring state from "Offline" to "Opening serial connection"
2020-11-17 21:45:46,573 - Connecting to port /dev/ttyUSB0, baudrate 115200
2020-11-17 21:45:46,590 - Changing monitoring state from "Opening serial connection" to "Connecting"
2020-11-17 21:45:46,593 - Connected to: Serial<id=0x6c567810, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-11-17 21:45:46,602 - Send: N0 M110 N0*125
2020-11-17 21:45:46,839 - Recv: start
2020-11-17 21:45:46,870 - Recv: echo: External Reset
2020-11-17 21:45:46,877 - Send: N0 M110 N0*125
2020-11-17 21:45:46,878 - Recv: Marlin
2020-11-17 21:45:46,881 - Recv: echo: Last Updated: 2015-12-01 12:00 | Author: (Ender-5)
2020-11-17 21:45:46,916 - Recv: Compiled: Oct 19 2018
2020-11-17 21:45:46,927 - Recv: echo: Free Memory: 9550  PlannerBufferBytes: 1232
2020-11-17 21:45:46,930 - Recv: echo:V21 stored settings retrieved (380 bytes)
2020-11-17 21:45:46,934 - Recv: echo:Steps per unit:
2020-11-17 21:45:46,936 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E92.64
2020-11-17 21:45:46,938 - Recv: echo:Maximum feedrates (mm/s):
2020-11-17 21:45:46,940 - Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
2020-11-17 21:45:46,942 - Recv: echo:Maximum Acceleration (mm/s2):
2020-11-17 21:45:46,944 - Recv: echo:  M201 X500 Y500 Z100 E1000
2020-11-17 21:45:46,947 - Recv: echo:Accelerations: P=printing, R=retract and T=travel
2020-11-17 21:45:46,949 - Recv: echo:  M204 P500.00 R500.00 T500.00
2020-11-17 21:45:46,951 - Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
2020-11-17 21:45:46,953 - Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Z0.40 E10.00
2020-11-17 21:45:46,955 - Recv: echo:Home offset (mm):
2020-11-17 21:45:46,957 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-11-17 21:45:46,959 - Recv: echo:Material heatup parameters:
2020-11-17 21:45:46,961 - Recv: echo:  M145 M0 H185 B0 F0
2020-11-17 21:45:46,963 - Recv: echo:  M145 M1 H240 B0 F0
2020-11-17 21:45:46,965 - Recv: echo:PID settings:
2020-11-17 21:45:46,967 - Recv: echo:  M301 P22.20 I1.08 D114.00 C100.00 L20
2020-11-17 21:45:46,969 - Recv: echo:Filament settings: Disabled
2020-11-17 21:45:46,971 - Recv: echo:  M200 D3.00
2020-11-17 21:45:46,973 - Recv: echo:  M200 D0
2020-11-17 21:45:48,524 - Recv: echo:SD card ok
2020-11-17 21:45:48,541 - Recv: Init power off infomation.
2020-11-17 21:45:48,545 - Recv: size:
2020-11-17 21:45:48,550 - Recv: 591
2020-11-17 21:45:48,554 - Recv: init valid:
2020-11-17 21:45:48,558 - Recv: 0
2020-11-17 21:45:48,565 - Recv: 0
2020-11-17 21:45:48,569 - Recv: ok
2020-11-17 21:45:48,580 - Send: N0 M110 N0*125
2020-11-17 21:45:48,582 - Changing monitoring state from "Connecting" to "Operational"
2020-11-17 21:45:48,615 - Recv: ok
2020-11-17 21:45:48,633 - Send: N0 M110 N0*125
2020-11-17 21:45:48,650 - Recv: ok
2020-11-17 21:45:48,656 - Send: N1 M115*39
2020-11-17 21:45:48,679 - Recv: FIRMWARE_NAME:Marlin 1.1.0-RC3 From Archive SOURCE_CODE_URL:http:// ... PROTOCOL_VERSION:1.0 MACHINE_TYPE:www.creality3d.cn EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2020-11-17 21:45:48,715 - Recv: ok
2020-11-17 21:45:48,723 - Send: M20
2020-11-17 21:45:48,729 - Recv: Begin file list
2020-11-17 21:45:48,735 - Recv: CE3_TA~1.GCO
2020-11-17 21:45:48,740 - Recv: CE3_CU~1.GCO
2020-11-17 21:45:48,744 - Recv: End file list
2020-11-17 21:45:48,754 - Recv: ok
2020-11-17 21:45:53,581 - Send: M105
2020-11-17 21:45:53,592 - Recv: ok T:19.1 /0.0 B:19.4 /0.0 T0:19.1 /0.0 @:0 B@:0
2020-11-17 21:45:58,582 - Send: M105
2020-11-17 21:45:58,620 - Recv: ok T:19.3 /0.0 B:19.4 /0.0 T0:19.3 /0.0 @:0 B@:0
2020-11-17 21:46:03,584 - Send: M105
2020-11-17 21:46:03,595 - Recv: ok T:19.3 /0.0 B:19.4 /0.0 T0:19.3 /0.0 @:0 B@:0
2020-11-17 21:46:08,593 - Send: M105
2020-11-17 21:46:08,624 - Recv: ok T:19.2 /0.0 B:19.4 /0.0 T0:19.2 /0.0 @:0 B@:0
2020-11-17 21:46:13,594 - Send: M105
2020-11-17 21:46:13,608 - Recv: ok T:19.3 /0.0 B:19.4 /0.0 T0:19.3 /0.0 @:0 B@:0
2020-11-17 21:46:18,598 - Send: M105
2020-11-17 21:46:18,629 - Recv: ok T:19.3 /0.0 B:19.4 /0.0 T0:19.3 /0.0 @:0 B@:0
2020-11-17 21:46:23,599 - Send: M105
2020-11-17 21:46:23,612 - Recv: ok T:19.3 /0.0 B:19.4 /0.0 T0:19.3 /0.0 @:0 B@:0