2019-08-10 23:02:59,468 - Connecting to: /dev/ttyUSB0
2019-08-10 23:02:59,491 - Changing monitoring state from "Offline" to "Opening serial port"
2019-08-10 23:02:59,497 - Connected to: Serial<id=0x6a8bafd0, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2019-08-10 23:02:59,498 - Changing monitoring state from "Opening serial port" to "Connecting"
2019-08-10 23:02:59,508 - Send: N0 M110 N0*125
2019-08-10 23:03:00,436 - Recv: start
2019-08-10 23:03:00,439 - Recv: echo:Marlin 1.1.3
2019-08-10 23:03:00,441 - Send: N0 M110 N0*125
2019-08-10 23:03:00,443 - Recv: 
2019-08-10 23:03:00,445 - Recv: echo: Last Updated: 2017-06-04 12:00 | Author: (Phil Ramirez, Folgertech FT-5 Stock)
2019-08-10 23:03:00,446 - Recv: Compiled: Sep  8 2018
2019-08-10 23:03:00,448 - Recv: echo: Free Memory: 3711  PlannerBufferBytes: 1264
2019-08-10 23:03:00,449 - Recv: echo:V38 stored settings retrieved (453 bytes; crc 16127)
2019-08-10 23:03:00,452 - Recv: echo:  G21    ; Units in mm
2019-08-10 23:03:00,453 - Recv: echo:  M149 C ; Units in Celsius
2019-08-10 23:03:00,455 - Recv: 
2019-08-10 23:03:00,457 - Recv: echo:Filament settings: Disabled
2019-08-10 23:03:00,459 - Recv: echo:  M200 D1.75
2019-08-10 23:03:00,460 - Recv: echo:  M200 D0
2019-08-10 23:03:00,462 - Recv: echo:Steps per unit:
2019-08-10 23:03:00,463 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E200.00
2019-08-10 23:03:00,465 - Recv: echo:Maximum feedrates (units/s):
2019-08-10 23:03:00,466 - Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
2019-08-10 23:03:00,468 - Recv: echo:Maximum Acceleration (units/s2):
2019-08-10 23:03:00,470 - Recv: echo:  M201 X800 Y800 Z200 E10000
2019-08-10 23:03:00,471 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2019-08-10 23:03:00,473 - Recv: echo:  M204 P800.00 R2500.00 T800.00
2019-08-10 23:03:00,475 - Recv: echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>
2019-08-10 23:03:00,477 - Recv: echo:  M205 S0.00 T0.00 B20000 X15.00 Y15.00 Z0.40 E5.00
2019-08-10 23:03:00,478 - Recv: echo:Home offset:
2019-08-10 23:03:00,479 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2019-08-10 23:03:00,481 - Recv: echo:Material heatup parameters:
2019-08-10 23:03:00,489 - Recv: echo:  M145 S0 H180 B70 F0
2019-08-10 23:03:00,492 - Recv:   M145 S1 H240 B110 F0
2019-08-10 23:03:00,494 - Recv: echo:PID settings:
2019-08-10 23:03:00,496 - Recv: echo:  M301 P17.60 I1.30 D63.50
2019-08-10 23:03:02,981 - Recv: echo:SD card ok
2019-08-10 23:03:02,998 - Recv: ok
2019-08-10 23:03:03,006 - Changing monitoring state from "Connecting" to "Operational"
2019-08-10 23:03:03,016 - Send: N0 M110 N0*125
2019-08-10 23:03:03,034 - Recv: echo:SD card ok
2019-08-10 23:03:03,081 - Recv: ok
2019-08-10 23:03:03,140 - Send: N1 M115*39
2019-08-10 23:03:03,196 - Recv: FIRMWARE_NAME:Marlin 1.1.3 (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:FT-5 Marlin 1.1.2 EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2019-08-10 23:03:03,205 - Recv: ok
2019-08-10 23:03:03,207 - Send: M20
2019-08-10 23:03:03,219 - Recv: Begin file list
2019-08-10 23:03:03,357 - Recv: End file list
2019-08-10 23:03:03,359 - Recv: ok
2019-08-10 23:03:08,008 - Send: M105
2019-08-10 23:03:08,023 - Recv: ok T:20.82 /0 B:20.74 /0 @:0 B@:0
2019-08-10 23:03:13,009 - Send: M105
2019-08-10 23:03:13,025 - Recv: ok T:20.82 /0 B:20.90 /0 @:0 B@:0
2019-08-10 23:03:18,010 - Send: M105
2019-08-10 23:03:18,026 - Recv: ok T:20.82 /0 B:20.82 /0 @:0 B@:0
2019-08-10 23:03:23,012 - Send: M105
2019-08-10 23:03:23,027 - Recv: ok T:20.90 /0 B:20.59 /0 @:0 B@:0
2019-08-10 23:03:28,013 - Send: M105
2019-08-10 23:03:28,029 - Recv: ok T:20.62 /0 B:20.74 /0 @:0 B@:0
2019-08-10 23:03:33,021 - Send: M105
2019-08-10 23:03:33,032 - Recv: ok T:20.82 /0 B:21.02 /0 @:0 B@:0