2021-01-03 22:58:09,017 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-03 22:58:09,021 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2021-01-03 22:58:09,021 - octoprint.server - INFO - OctoPrint 1.5.2
2021-01-03 22:58:09,026 - octoprint.plugin.core - INFO - 31 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-03 22:58:09,039 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-03 22:58:09,039 - octoprint.server - INFO - ------------------------------------------------------------------------------
2021-01-03 23:13:09,019 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-03 23:28:09,020 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-03 23:43:09,021 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-03 23:58:09,022 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 00:13:09,024 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 00:28:09,025 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 00:43:09,026 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 00:58:09,027 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 01:13:09,029 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 01:28:09,030 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 01:43:09,031 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 01:38:44,345 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:38:44,347 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 01:38:44,354 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:38:50,734 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 01:38:50,735 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 01:38:50,735 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 01:38:50,739 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 01:38:50,799 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:38:52,561 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:38:52,767 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 01:38:52,772 - octoprint.plugin.core - INFO - Found 31 plugin(s) providing 30 mixin implementations, 59 hook handlers
2021-01-04 01:38:52,891 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 01:38:52,915 - octoprint.server - INFO - Intermediary server started
2021-01-04 01:38:52,934 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 01:38:53,178 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 01:38:53,181 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 01:38:53,181 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 01:38:53,182 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 01:38:53,182 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:38:53,183 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:38:53,183 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 01:38:53,183 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 01:38:53,184 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 01:38:53,184 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 01:38:53,184 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 01:38:53,185 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:38:53,185 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2021-01-04 01:38:53,185 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 01:38:53,185 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 01:38:53,186 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 01:38:53,929 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:38:54,535 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 01:38:54,536 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:38:54,537 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:38:54,751 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 01:38:54,781 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 01:38:54,789 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 01:38:54,933 - octoprint.plugin.core - INFO - Initialized 30 plugin implementation(s)
2021-01-04 01:38:54,949 - octoprint.plugin.core - INFO - 31 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:38:54,973 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 01:38:54,983 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 01:38:55,003 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 01:38:55,760 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 01:38:55,926 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 01:38:55,927 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 01:38:55,928 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 01:38:55,931 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 01:38:55,934 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 01:38:55,937 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 01:38:55,939 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 01:38:56,748 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 01:38:57,555 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 01:38:57,578 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 01:38:57,585 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _important from network
2021-01-04 01:38:57,587 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _releases from network
2021-01-04 01:38:57,591 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch repository from network
2021-01-04 01:38:57,592 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _blog from network
2021-01-04 01:38:57,598 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch notices from network
2021-01-04 01:38:57,602 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _plugins from network
2021-01-04 01:38:57,605 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _octopi from network
2021-01-04 01:38:58,218 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:38:58,219 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:38:58,220 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:38:58,225 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 01:38:58,225 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 01:38:58,558 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 01:38:59,279 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.71s
2021-01-04 01:38:59,611 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2021-01-04 01:38:59,709 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:38:59,715 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:38:59,715 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:38:59,880 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.49s
2021-01-04 01:39:00,641 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.54s
2021-01-04 01:39:00,916 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 01:39:00,917 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 01:39:00,917 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 01:39:00,918 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:39:00,929 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 01:39:00,929 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:39:00,930 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 01:39:01,036 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:39:01,253 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.48s
2021-01-04 01:39:01,328 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2021-01-04 01:39:01,823 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.52s
2021-01-04 01:39:09,940 - octoprint.server.preemptive_cache - INFO - ... done in 8.90s
2021-01-04 01:39:09,941 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:39:10,235 - octoprint.server.preemptive_cache - INFO - ... done in 0.29s
2021-01-04 01:46:10,060 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:46:10,062 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 01:46:10,062 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:46:16,435 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 01:46:16,435 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 01:46:16,435 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 01:46:16,440 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 01:46:16,502 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:46:18,257 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:46:18,465 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 01:46:18,470 - octoprint.plugin.core - INFO - Found 31 plugin(s) providing 30 mixin implementations, 59 hook handlers
2021-01-04 01:46:18,602 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 01:46:18,678 - octoprint.server - INFO - Intermediary server started
2021-01-04 01:46:18,703 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 01:46:18,981 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 01:46:18,984 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 01:46:18,985 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 01:46:18,985 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 01:46:18,986 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:46:18,986 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:46:18,987 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 01:46:18,987 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 01:46:18,988 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 01:46:18,988 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 01:46:18,989 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 01:46:18,989 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:46:18,993 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2021-01-04 01:46:18,994 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 01:46:18,994 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 01:46:18,995 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 01:46:19,737 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:46:20,346 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 01:46:20,347 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:46:20,347 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:46:20,558 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 01:46:20,588 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 01:46:20,597 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 01:46:20,740 - octoprint.plugin.core - INFO - Initialized 30 plugin implementation(s)
2021-01-04 01:46:20,755 - octoprint.plugin.core - INFO - 31 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:46:20,781 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 01:46:20,790 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 01:46:20,808 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 01:46:21,558 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 01:46:21,691 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 01:46:21,693 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 01:46:21,694 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 01:46:21,698 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 01:46:21,700 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 01:46:21,703 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 01:46:21,705 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 01:46:22,514 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 01:46:23,319 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 01:46:23,323 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 01:46:23,343 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 01:46:23,376 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 01:46:24,050 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:46:24,058 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:46:24,058 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:46:24,110 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 01:46:24,110 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 01:46:24,263 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 01:46:24,318 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 01:46:24,452 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 01:46:24,452 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 01:46:24,453 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:46:24,473 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 01:46:24,486 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:46:24,582 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 01:46:25,014 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 01:46:25,425 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:46:25,744 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 01:46:32,809 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:46:33,954 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:46:33,955 - octoprint.server.api - INFO - Actively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:46:34,044 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:46:34,045 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:46:35,267 - octoprint.server.preemptive_cache - INFO - ... done in 9.84s
2021-01-04 01:46:35,268 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:46:35,669 - octoprint.server.preemptive_cache - INFO - ... done in 0.40s
2021-01-04 01:46:36,168 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:46:36,179 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:46:36,190 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:46:36,221 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:46:36,221 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:46:37,094 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 01:51:44,494 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:51:47,804 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:51:47,817 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:51:49,525 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 01:51:49,555 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 01:51:49,555 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 01:51:49,556 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 01:51:49,637 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 01:51:49,661 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 01:51:49,730 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 01:51:49,758 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 01:51:49,822 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 01:51:54,713 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:52:22,188 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/stefancandrea/OctoPrint-Thingiverse/archive/master.zip
2021-01-04 01:52:22,717 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:52:28,961 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:52:29,060 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:52:29,123 - octoprint.plugin.core - INFO - Found 32 plugin(s) providing 30 mixin implementations, 59 hook handlers
2021-01-04 01:52:29,126 - octoprint.plugin.core - INFO - 32 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
| !Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:52:29,126 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Thingiverse Plugin, version 1.1.0
2021-01-04 01:52:30,782 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:52:34,720 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:52:38,611 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/jneilliii/OctoPrint-MyMiniFactory/archive/master.zip
2021-01-04 01:52:39,250 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:52:46,707 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:52:46,810 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:52:46,889 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 30 mixin implementations, 59 hook handlers
2021-01-04 01:52:46,891 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
| !MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
| !Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:52:46,892 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: MyMiniFactory, version 0.1.4
2021-01-04 01:52:51,080 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart
2021-01-04 01:52:51,222 - octoprint.server - INFO - Shutting down...
2021-01-04 01:52:51,239 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15:
! STDOUT: 
! STDERR: 
2021-01-04 01:52:51,755 - octoprint.server - INFO - Calling on_shutdown on plugins
2021-01-04 01:52:51,757 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2021-01-04 01:52:51,762 - octoprint.events - INFO - Event loop shut down
2021-01-04 01:52:52,267 - octoprint.server - INFO - Goodbye!
2021-01-04 01:52:54,106 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:52:54,107 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 01:52:54,107 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:52:54,466 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 01:52:54,552 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-01-04 01:52:54,552 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-01-04 01:52:54,552 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-01-04 01:52:55,158 - octoprint.startup - INFO - Blacklist processing done, adding 12 blacklisted plugin versions: roomtemp (any), GcodeEditor (0.1.1), GcodeEditor (0.2.0), GcodeEditor (0.2.1), GcodeEditor (0.2.2), GcodeEditor (0.2.3), GcodeEditor (0.2.4), GcodeEditor (0.2.5), GcodeEditor (0.2.6), GcodeEditor (0.2.8), gcodeleveling (0.1.0), gcodeleveling (0.1.1)
2021-01-04 01:52:55,191 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:52:56,510 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:52:56,683 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 01:52:56,690 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 01:52:56,794 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 01:52:56,801 - octoprint.server - INFO - Intermediary server started
2021-01-04 01:52:56,819 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 01:52:57,054 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 01:52:57,057 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 01:52:57,057 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 01:52:57,058 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 01:52:57,058 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:52:57,058 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:52:57,059 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 01:52:57,059 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 01:52:57,059 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 01:52:57,060 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 01:52:57,060 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 01:52:57,060 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:52:57,061 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:52:57,061 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 01:52:57,061 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 01:52:57,061 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 01:52:57,712 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:52:58,346 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 01:52:58,347 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:52:58,348 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:52:58,559 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 01:52:58,597 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 01:52:58,606 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 01:52:58,706 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 01:52:58,816 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:52:58,841 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 01:52:58,855 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 01:52:58,881 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 01:52:59,608 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 01:52:59,634 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 01:52:59,636 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 01:52:59,636 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event
2021-01-04 01:52:59,636 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 01:52:59,645 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 01:52:59,648 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 01:52:59,648 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 01:52:59,649 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-01-04 01:52:59,669 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 01:53:00,584 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 01:53:00,843 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 01:53:01,392 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:53:01,393 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:53:01,393 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:53:01,406 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 01:53:01,412 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 01:53:01,542 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 01:53:01,847 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 01:53:01,894 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 01:53:02,581 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:53:02,587 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:53:02,598 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:53:02,654 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 01:53:03,055 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 01:53:03,820 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 01:53:03,820 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 01:53:03,821 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:53:03,831 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 01:53:03,831 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 01:53:03,832 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 01:53:04,476 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:53:05,830 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:53:06,299 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:53:06,305 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:14,568 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:14,568 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:14,795 - octoprint.server.preemptive_cache - INFO - ... done in 10.32s
2021-01-04 01:53:14,795 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 01:53:15,191 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:53:15,217 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:53:15,379 - octoprint.server.preemptive_cache - INFO - ... done in 0.58s
2021-01-04 01:53:16,149 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:16,149 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:17,578 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:53:17,599 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:17,599 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:18,393 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 01:53:18,413 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:53:29,166 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 01:53:29,199 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 01:53:29,199 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 01:53:29,200 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 01:53:29,309 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 01:53:29,343 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 01:53:29,397 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 01:53:29,402 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 01:53:29,509 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 01:53:34,385 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:53:50,803 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:53:50,845 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:50,846 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:50,936 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:53:51,183 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:53:51,366 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:51,366 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:52,470 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:52,547 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:53:52,547 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:53:53,181 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:53:53,186 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:53:53,518 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 01:53:54,089 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:54:10,429 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:54:14,388 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:54:31,745 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:31,845 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:54:31,846 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:31,938 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:54:32,180 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:32,191 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:54:32,420 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:54:33,789 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:54:35,961 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:1e6:488b:b8e1:e6be
2021-01-04 01:54:35,962 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:36,192 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:54:36,193 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:37,134 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:37,207 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:37,213 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:54:37,235 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:54:37,236 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:38,236 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 01:54:38,797 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:54:40,195 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:54:40,196 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:40,416 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:54:40,416 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:41,183 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:54:41,617 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:41,716 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 01:54:41,717 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 01:54:42,484 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 01:54:42,853 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 01:54:43,001 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 01:54:43,057 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 01:54:50,441 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:54:54,394 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:55:30,439 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:55:34,397 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:55:44,673 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 01:56:10,445 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:56:14,407 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:56:50,457 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:56:54,413 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:57:30,471 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:57:34,418 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:58:10,462 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:58:14,423 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:58:50,469 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:58:54,428 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:59:30,473 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 01:59:34,433 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:00:10,475 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:00:14,437 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:00:50,479 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:00:54,441 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:01:30,485 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:01:34,447 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:02:10,492 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:02:14,451 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:02:50,495 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:02:54,456 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:03:30,502 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2021-01-04 02:03:34,462 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:03:58,154 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-01-04 02:03:58,160 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-01-04 02:03:59,941 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 01:59:47,450 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:59:47,452 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 01:59:47,452 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 01:59:53,831 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 01:59:53,831 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 01:59:53,831 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 01:59:53,836 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 01:59:53,901 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 01:59:55,708 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 01:59:55,914 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 01:59:55,919 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 01:59:56,622 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 01:59:56,646 - octoprint.server - INFO - Intermediary server started
2021-01-04 01:59:56,666 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 01:59:56,992 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 01:59:56,995 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 01:59:56,995 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 01:59:56,996 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 01:59:56,996 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 01:59:56,997 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')")
2021-01-04 01:59:56,997 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 01:59:56,997 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 01:59:56,998 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 01:59:56,998 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 01:59:56,998 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 01:59:56,999 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:59:56,999 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 01:59:56,999 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 01:59:57,000 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 01:59:57,001 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 01:59:57,721 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 01:59:58,330 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 01:59:58,331 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 01:59:58,331 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 01:59:58,564 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 01:59:58,602 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 01:59:58,611 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 01:59:58,756 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 01:59:58,781 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 01:59:58,805 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 01:59:58,816 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 01:59:58,854 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 01:59:59,554 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 01:59:59,662 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 01:59:59,664 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 01:59:59,664 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 01:59:59,669 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 01:59:59,673 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 01:59:59,675 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 01:59:59,677 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:00:00,487 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:00:01,295 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:00:01,340 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:00:01,379 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:00:02,135 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:00:02,144 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:00:02,144 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:00:02,151 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:00:02,152 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:00:02,329 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:00:02,382 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:00:03,122 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:00:03,851 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:00:04,175 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:00:04,177 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:00:04,177 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:00:04,278 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 02:00:04,279 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:00:04,280 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:00:04,280 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:00:04,292 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:00:04,293 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:00:04,295 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:00:04,822 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:00:05,042 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:00:14,119 - octoprint.server.preemptive_cache - INFO - ... done in 9.08s
2021-01-04 02:00:14,120 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:00:14,420 - octoprint.server.preemptive_cache - INFO - ... done in 0.30s
2021-01-04 02:13:24,724 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:24,931 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:24,938 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:25,017 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:25,018 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:13:26,266 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:26,882 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:26,883 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:13:27,223 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:27,963 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:27,963 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:13:29,401 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:29,483 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:29,484 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:13:29,789 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:13:29,798 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:13:30,127 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:13:30,677 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:13:33,999 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:13:34,029 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:13:34,030 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:13:34,030 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:13:34,135 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:13:34,158 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:13:34,238 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:13:34,277 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:13:34,334 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:13:39,224 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:13:42,238 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2021-01-04 02:13:42,239 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2021-01-04 02:13:51,203 - octoprint.filemanager.analysis - INFO - Starting analysis of local:UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:13:51,205 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python3 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:13:54,748 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:13:54,891 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:13:54,895 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:13:55,178 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:13:55,178 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2021-01-04 02:13:55,187 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:13:55,371 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:13:55,487 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:13:55,535 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:13:55,687 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-01-04 02:13:56,542 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:13:56,549 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:13:56,558 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584208, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:13:56,563 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:13:56,668 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:14:56,624 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2021-01-04 02:16:46,953 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-01-04 02:16:47,992 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:18:16,769 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 16, current line = 18
| Last lines in terminal:
| Recv: T:212.28 /215 B:65.02 /65 B@:0 @:52
| Recv: T:213.51 /215 B:65.02 /65 B@:0 @:71
| Recv: T:214.39 /215 B:65.06 /65 B@:0 @:144
| Recv: ok 11
| Send: N12 G90*35
| Recv: ok 12
| Send: N13 M82*43
| Recv: ok 13
| Send: N14 M107 T0*84
| Recv: ok 14
| Send: N15 M190 S{material_bed_temperature_layer_0}*61
| Recv: ok 15
| Send: N16 M109 S{material_print_temperature_layer_0} T0*104
| Recv: Unknown command:N15 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N17 G28*37
| Recv: Error:expected line 16 got 17
| Recv: 
| Recv: Resend:16
2021-01-04 02:18:17,002 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 16, current line = 33
| Last lines in terminal:
| Recv: ok
| Send: N27 G1 Z0.150 F1002*40
| Recv: skip 27
| Recv: ok
| Send: N28 G1 E0.0000 F2100*12
| Recv: skip 28
| Recv: ok
| Send: N29 G92 E0.0000*82
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X16.675 Y-14.440 E0.1410 F1440*41
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.675 E0.2464*69
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X19.440 Y-11.290 E0.2568*68
| Recv: Error:expected line 16 got 32
| Recv: 
| Recv: Resend:16
2021-01-04 02:18:17,128 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 16, current line = 33
| Last lines in terminal:
| Recv: ok
| Send: N27 G1 Z0.150 F1002*40
| Recv: skip 27
| Recv: ok
| Send: N28 G1 E0.0000 F2100*12
| Recv: skip 28
| Recv: ok
| Send: N29 G92 E0.0000*82
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X16.675 Y-14.440 E0.1410 F1440*41
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.675 E0.2464*69
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X19.440 Y-11.290 E0.2568*68
| Recv: Error:expected line 16 got 32
| Recv: 
| Recv: Resend:16
2021-01-04 02:18:17,336 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 16, current line = 33
| Last lines in terminal:
| Recv: ok
| Send: N27 G1 Z0.150 F1002*40
| Recv: skip 27
| Recv: ok
| Send: N28 G1 E0.0000 F2100*12
| Recv: skip 28
| Recv: ok
| Send: N29 G92 E0.0000*82
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X16.675 Y-14.440 E0.1410 F1440*41
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.675 E0.2464*69
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X19.440 Y-11.290 E0.2568*68
| Recv: Error:expected line 16 got 32
| Recv: 
| Recv: Resend:16
2021-01-04 02:18:17,461 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 16, current line = 33
| Last lines in terminal:
| Recv: ok
| Send: N27 G1 Z0.150 F1002*40
| Recv: skip 27
| Recv: ok
| Send: N28 G1 E0.0000 F2100*12
| Recv: skip 28
| Recv: ok
| Send: N29 G92 E0.0000*82
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X16.675 Y-14.440 E0.1410 F1440*41
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.675 E0.2464*69
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X19.440 Y-11.290 E0.2568*68
| Recv: Error:expected line 16 got 32
| Recv: 
| Recv: Resend:16
2021-01-04 02:18:18,290 - octoprint.util.comm - WARNING - Printer keeps requesting line 16 again and again, communication stuck
2021-01-04 02:18:18,290 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 16 again and again, communication stuck"
2021-01-04 02:18:18,295 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:18:18,295 - octoprint.filemanager.analysis - INFO - Starting analysis of local:UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:18:18,296 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python3 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:18:18,301 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:18:18,324 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:18:18,338 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:18:18,343 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 16 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 16 again and again, communication stuck)"
2021-01-04 02:18:18,373 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:18:18,421 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:18:18,426 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:18:18,866 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:18:38,921 - octoprint.filemanager.analysis - INFO - Analysis of entry local:UrbanAtWork_GearHeart_V1_8.gcode finished, needed 20.63s
2021-01-04 02:18:38,927 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:18:38,931 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:20:57,679 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:20:57,680 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:20:57,730 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:20:57,735 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:20:57,777 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:20:57,821 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:20:57,937 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:20:57,983 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:21:02,327 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:21:02,342 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:21:02,352 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:21:02,924 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:21:03,492 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:21:03,506 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:21:03,686 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:21:03,687 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:21:03,692 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:21:03,704 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:21:03,718 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584208, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:21:03,724 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:21:03,781 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 8
| Last lines in terminal:
| Send: N0 M110 N0*125
| Recv: ok
| Send: N1 G21*27
| Recv: ok 1
| Send: N2 G90*18
| Recv: ok 2
| Send: N3 M82*26
| Recv: ok 3
| Send: N4 M107 T0*101
| Recv: ok 4
| Send: N5 M190 S{material_bed_temperature_layer_0}*12
| Recv: ok 5
| Send: N6 M109 S{material_print_temperature_layer_0} T0*89
| Recv: Unknown command:N5 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N7 G28*20
| Recv: Error:expected line 6 got 7
| Recv: 
| Recv: Resend:6
2021-01-04 02:21:03,824 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:21:03,924 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:21:04,044 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:21:04,177 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:21:04,294 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:21:04,999 - octoprint.util.comm - WARNING - Printer keeps requesting line 6 again and again, communication stuck
2021-01-04 02:21:05,000 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 6 again and again, communication stuck"
2021-01-04 02:21:05,004 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:21:05,008 - octoprint.plugins.filamentmanager - INFO - Filament used: 27.0 mm (tool0)
2021-01-04 02:21:05,014 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:21:05,022 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:21:05,028 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 6 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 6 again and again, communication stuck)"
2021-01-04 02:21:05,040 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:21:05,049 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:21:05,053 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:21:05,533 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:21:08,307 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:21:08,310 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:21:08,351 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:21:08,354 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:21:08,361 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:21:08,363 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:21:08,391 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:21:08,414 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:21:13,376 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:21:35,994 - octoprint.server.api.system - INFO - Performing command for core:reboot: sudo shutdown -r now
2021-01-04 02:21:36,245 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:21:36,256 - octoprint.server - INFO - Shutting down...
2021-01-04 02:21:36,273 - octoprint.server.api.system - WARNING - Command for core:reboot failed with return code -15:
! STDOUT: 
! STDERR: 
2021-01-04 02:21:36,827 - octoprint.server - INFO - Calling on_shutdown on plugins
2021-01-04 02:21:36,828 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2021-01-04 02:21:36,830 - octoprint.events - INFO - Event loop shut down
2021-01-04 02:21:38,735 - octoprint.server - INFO - Goodbye!
2021-01-04 02:21:44,974 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:21:44,975 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 02:21:44,977 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:21:51,351 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:21:51,352 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:21:51,352 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:21:51,356 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 02:21:51,416 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 02:21:53,237 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 02:21:53,490 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 02:21:53,494 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 02:21:54,188 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 02:21:54,216 - octoprint.server - INFO - Intermediary server started
2021-01-04 02:21:54,244 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 02:21:54,573 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 02:21:54,576 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 02:21:54,577 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 02:21:54,577 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 02:21:54,578 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:21:54,578 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:21:54,579 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 02:21:54,580 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 02:21:54,580 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 02:21:54,581 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 02:21:54,581 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 02:21:54,584 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:21:54,585 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2021-01-04 02:21:54,586 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 02:21:54,587 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 02:21:54,588 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 02:21:55,302 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:21:55,917 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:21:55,918 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:21:55,918 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:21:56,149 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:21:56,187 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:21:56,196 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:21:56,342 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 02:21:56,367 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 02:21:56,392 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 02:21:56,403 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 02:21:56,423 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 02:21:57,120 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 02:21:57,215 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 02:21:57,217 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 02:21:57,217 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 02:21:57,222 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 02:21:57,225 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 02:21:57,227 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 02:21:57,229 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:21:58,039 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:21:58,844 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:21:58,854 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 02:21:58,890 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:21:58,937 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:21:59,307 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:21:59,642 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:21:59,648 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:21:59,648 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:21:59,725 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:21:59,725 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:22:00,091 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:22:00,503 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:22:00,723 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:22:00,723 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:22:00,748 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:22:00,950 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:22:01,081 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:22:01,081 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:22:01,082 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:22:01,123 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:22:01,123 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:22:01,145 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:22:01,894 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:22:02,735 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:22:03,943 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:22:04,357 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:22:05,382 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:22:05,383 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:22:33,899 - octoprint.server.preemptive_cache - INFO - ... done in 19.61s
2021-01-04 02:22:33,900 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:22:34,282 - octoprint.server.preemptive_cache - INFO - ... done in 0.38s
2021-01-04 02:22:35,084 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:22:35,085 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:22:35,620 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:22:35,836 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:22:35,836 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:22:36,887 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:22:36,910 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:22:39,717 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:22:39,743 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:22:39,743 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:22:39,744 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:22:39,810 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:22:39,833 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:22:39,903 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:22:39,934 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:22:40,046 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:22:42,327 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:22:42,362 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:22:42,368 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:22:43,433 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:22:43,443 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:22:44,886 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:22:47,590 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:22:47,599 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:22:47,612 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:22:47,638 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584208, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:22:47,640 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:22:47,667 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:22:47,739 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 8
| Last lines in terminal:
| Send: N0 M110 N0*125
| Recv: ok
| Send: N1 G21*27
| Recv: ok 1
| Send: N2 G90*18
| Recv: ok 2
| Send: N3 M82*26
| Recv: ok 3
| Send: N4 M107 T0*101
| Recv: ok 4
| Send: N5 M190 S{material_bed_temperature_layer_0}*12
| Recv: ok 5
| Send: N6 M109 S{material_print_temperature_layer_0} T0*89
| Recv: Unknown command:N5 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N7 G28*20
| Recv: Error:expected line 6 got 7
| Recv: 
| Recv: Resend:6
2021-01-04 02:22:47,780 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:22:47,877 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:22:47,997 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:22:48,114 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:22:48,230 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 23
| Last lines in terminal:
| Recv: ok
| Send: N17 M109 S215 T0*28
| Recv: skip 17
| Recv: ok
| Send: N18 G21*35
| Recv: skip 18
| Recv: ok
| Send: N19 G90*40
| Recv: skip 19
| Recv: ok
| Send: N20 M82*43
| Recv: skip 20
| Recv: ok
| Send: N21 M107 T0*82
| Recv: skip 21
| Recv: ok
| Send: N22 M190 S{material_bed_temperature_layer_0}*57
| Recv: Error:expected line 6 got 22
| Recv: 
| Recv: Resend:6
2021-01-04 02:22:48,933 - octoprint.util.comm - WARNING - Printer keeps requesting line 6 again and again, communication stuck
2021-01-04 02:22:48,933 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 6 again and again, communication stuck"
2021-01-04 02:22:48,937 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:22:48,940 - octoprint.plugins.filamentmanager - INFO - Filament used: 27.0 mm (tool0)
2021-01-04 02:22:48,945 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:22:48,954 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:22:48,961 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 6 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 6 again and again, communication stuck)"
2021-01-04 02:22:48,974 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:22:48,990 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:22:48,994 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:22:49,470 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:22:58,754 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:22:58,756 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:22:58,793 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:22:58,798 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:22:58,804 - octoprint.util.comm - WARNING - Printer requested line 6 but no sufficient history is available, can't resend. Printer requested line 6, current line is 1, line history has 1 entries.
2021-01-04 02:22:58,804 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 6, current line = 1
| Last lines in terminal:
| Changing monitoring state from "Offline" to "Opening serial connection"
| Connecting to port /dev/ttyUSB0, baudrate 115200
| Changing monitoring state from "Opening serial connection" to "Connecting"
| Connected to: Serial<id=0x7f680f5630, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
| Send: N0 M110 N0*125
| Recv: 
| Recv: Resend:6
| Printer requested line 6 but no sufficient history is available, can't resend
2021-01-04 02:22:58,812 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:23:06,256 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:23:06,292 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:23:06,307 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:23:07,370 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:23:07,378 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:23:09,505 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:23:09,510 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:23:09,515 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:23:09,528 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584208, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:23:09,533 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:23:34,845 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:23:37,661 - octoprint.util.comm - INFO - Cancelling job on behalf of user Randy1727
2021-01-04 02:23:37,670 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling"
2021-01-04 02:23:37,694 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:23:37,713 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:23:37,720 - octoprint.plugins.filamentreload - INFO - PrintCancelled: Disabling filament sensor.
2021-01-04 02:23:37,829 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:23:37,831 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:24:04,884 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:24:34,923 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:25:04,966 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:25:35,006 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:26:05,050 - octoprint.util.comm - INFO - No response from printer after 6 consecutive communication timeouts, considering it dead.
2021-01-04 02:26:05,064 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:26:05,082 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2021-01-04 02:26:05,090 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:27:16,939 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:27:16,940 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:27:19,049 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:27:19,191 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:27:19,191 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:27:20,210 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:27:20,780 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:27:35,673 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2021-01-04 02:27:35,674 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2021-01-04 02:27:38,800 - octoprint.filemanager.analysis - INFO - Starting analysis of local:UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:27:38,801 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python3 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode
2021-01-04 02:27:45,764 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:27:49,497 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:27:49,498 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:27:49,499 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:27:49,663 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:27:49,707 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:27:49,886 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:27:49,917 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:27:50,213 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:27:54,891 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:28:00,018 - octoprint.filemanager.analysis - INFO - Analysis of entry local:UrbanAtWork_GearHeart_V1_8.gcode finished, needed 21.22s
2021-01-04 02:28:00,026 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:28:00,034 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:28:00,044 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:28:00,622 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:28:00,706 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:28:00,901 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:28:00,959 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:28:01,005 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:28:01,232 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:28:01,247 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:28:01,259 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:28:01,278 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:28:01,294 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:28:01,302 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:28:01,351 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 15, current line = 17
| Last lines in terminal:
| Recv: TargetExtr0:215
| Recv: ok 9
| Send: N10 G21*43
| Recv: ok 10
| Send: N11 G90*32
| Recv: ok 11
| Send: N12 M82*42
| Recv: ok 12
| Send: N13 M107 T0*83
| Recv: ok 13
| Send: N14 M190 S{material_bed_temperature_layer_0}*60
| Recv: ok 14
| Send: N15 M109 S{material_print_temperature_layer_0} T0*107
| Recv: Unknown command:N14 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N16 G28 X0 Y0*37
| Recv: Error:expected line 15 got 16
| Recv: 
| Recv: Resend:15
2021-01-04 02:28:01,570 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 15, current line = 32
| Last lines in terminal:
| Recv: ok
| Send: N26 G1 Z0.150 F1002*41
| Recv: skip 26
| Recv: ok
| Send: N27 G1 E0.0000 F2100*3
| Recv: skip 27
| Recv: ok
| Send: N28 G92 E0.0000*83
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X16.675 Y-14.440 E0.1410 F1440*33
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.290 E0.2568*71
| Recv: Error:expected line 15 got 31
| Recv: 
| Recv: Resend:15
2021-01-04 02:28:01,697 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 15, current line = 32
| Last lines in terminal:
| Recv: ok
| Send: N26 G1 Z0.150 F1002*41
| Recv: skip 26
| Recv: ok
| Send: N27 G1 E0.0000 F2100*3
| Recv: skip 27
| Recv: ok
| Send: N28 G92 E0.0000*83
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X16.675 Y-14.440 E0.1410 F1440*33
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.290 E0.2568*71
| Recv: Error:expected line 15 got 31
| Recv: 
| Recv: Resend:15
2021-01-04 02:28:01,826 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 15, current line = 32
| Last lines in terminal:
| Recv: ok
| Send: N26 G1 Z0.150 F1002*41
| Recv: skip 26
| Recv: ok
| Send: N27 G1 E0.0000 F2100*3
| Recv: skip 27
| Recv: ok
| Send: N28 G92 E0.0000*83
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X16.675 Y-14.440 E0.1410 F1440*33
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.290 E0.2568*71
| Recv: Error:expected line 15 got 31
| Recv: 
| Recv: Resend:15
2021-01-04 02:28:01,954 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 15, current line = 32
| Last lines in terminal:
| Recv: ok
| Send: N26 G1 Z0.150 F1002*41
| Recv: skip 26
| Recv: ok
| Send: N27 G1 E0.0000 F2100*3
| Recv: skip 27
| Recv: ok
| Send: N28 G92 E0.0000*83
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X16.675 Y-14.440 E0.1410 F1440*33
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 30
| Recv: ok
| Send: N31 G1 X19.440 Y-11.290 E0.2568*71
| Recv: Error:expected line 15 got 31
| Recv: 
| Recv: Resend:15
2021-01-04 02:28:02,732 - octoprint.util.comm - WARNING - Printer keeps requesting line 15 again and again, communication stuck
2021-01-04 02:28:02,732 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 15 again and again, communication stuck"
2021-01-04 02:28:02,738 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:28:02,743 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:28:02,748 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:28:02,760 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:28:02,762 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 15 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 15 again and again, communication stuck)"
2021-01-04 02:28:02,781 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:28:02,810 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:28:02,824 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:28:03,287 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:28:08,113 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:28:08,115 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000
2021-01-04 02:28:08,202 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:28:08,227 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:28:38,413 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:28:48,486 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline"
2021-01-04 02:28:48,506 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:31:42,123 - octoprint.server.api.system - INFO - Performing command for core:reboot: sudo shutdown -r now
2021-01-04 02:31:42,284 - octoprint.server - INFO - Shutting down...
2021-01-04 02:31:42,349 - octoprint.server.api.system - WARNING - Command for core:reboot failed with return code -15:
! STDOUT: 
! STDERR: 
2021-01-04 02:31:42,390 - octoprint.server - INFO - Calling on_shutdown on plugins
2021-01-04 02:31:42,392 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2021-01-04 02:31:42,397 - octoprint.events - INFO - Event loop shut down
2021-01-04 02:31:45,217 - octoprint.server - INFO - Goodbye!
2021-01-04 02:31:51,041 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:31:51,042 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 02:31:51,044 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:31:57,417 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:31:57,418 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:31:57,418 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:31:57,422 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 02:31:57,483 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 02:31:59,270 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 02:31:59,595 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 02:31:59,600 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 02:32:00,331 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 02:32:00,355 - octoprint.server - INFO - Intermediary server started
2021-01-04 02:32:00,374 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 02:32:00,709 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 02:32:00,712 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 02:32:00,712 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 02:32:00,713 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 02:32:00,713 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:32:00,713 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')")
2021-01-04 02:32:00,714 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 02:32:00,714 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 02:32:00,714 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 02:32:00,715 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 02:32:00,715 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 02:32:00,715 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:32:00,716 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:32:00,716 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 02:32:00,716 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 02:32:00,720 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 02:32:01,514 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:32:02,127 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:32:02,128 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:32:02,128 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:32:02,358 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:32:02,396 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:32:02,405 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:32:02,549 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 02:32:02,574 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 02:32:02,601 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 02:32:02,612 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 02:32:02,633 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 02:32:03,332 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 02:32:03,832 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 02:32:03,834 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 02:32:03,834 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 02:32:03,838 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 02:32:03,841 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 02:32:03,843 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 02:32:03,845 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:32:04,658 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:32:05,474 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:32:05,478 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 02:32:05,561 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:32:05,638 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:32:06,319 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:32:06,326 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:32:06,326 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:32:06,410 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:32:06,410 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:32:06,739 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:32:06,803 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:32:06,819 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:32:06,918 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:32:06,919 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:32:06,919 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:32:06,941 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:32:06,941 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:32:06,951 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:32:06,963 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:32:07,754 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,485 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,538 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,592 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,717 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,717 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:08,841 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,841 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:08,900 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:08,934 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:32:09,025 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:32:11,351 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:32:12,015 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:32:12,016 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000
2021-01-04 02:32:12,062 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:32:12,066 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:32:12,069 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:32:33,981 - octoprint.server.preemptive_cache - INFO - ... done in 12.22s
2021-01-04 02:32:33,981 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:32:34,281 - octoprint.server.preemptive_cache - INFO - ... done in 0.30s
2021-01-04 02:32:34,241 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:32:34,243 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 02:32:34,244 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:32:40,619 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:32:40,620 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:32:40,620 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:32:40,625 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 02:32:40,685 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 02:32:42,476 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 02:32:42,681 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 02:32:42,686 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 02:32:43,375 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 02:32:43,399 - octoprint.server - INFO - Intermediary server started
2021-01-04 02:32:43,419 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 02:32:43,741 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 02:32:43,744 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 02:32:43,744 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 02:32:43,745 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 02:32:43,745 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:32:43,745 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:32:43,746 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 02:32:43,746 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 02:32:43,746 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 02:32:43,747 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 02:32:43,747 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 02:32:43,747 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:32:43,748 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2021-01-04 02:32:43,748 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 02:32:43,748 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 02:32:43,752 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 02:32:44,461 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:32:45,067 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:32:45,069 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:32:45,069 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:32:45,297 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:32:45,335 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:32:45,344 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:32:45,489 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 02:32:45,515 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 02:32:45,542 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 02:32:45,553 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 02:32:45,567 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 02:32:46,264 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 02:32:46,405 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 02:32:46,407 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 02:32:46,408 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 02:32:46,412 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 02:32:46,415 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 02:32:46,417 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 02:32:46,420 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:32:47,229 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:32:48,036 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:32:48,084 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:32:48,137 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:32:48,847 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:32:48,858 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:32:48,859 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:32:48,941 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:32:48,942 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:32:49,279 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:32:51,015 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:32:51,058 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:32:51,165 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:32:51,166 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:32:51,166 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:32:51,245 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:32:51,246 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:32:51,267 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:32:52,938 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:32:52,956 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:32:53,568 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:53,776 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:32:54,239 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:54,374 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:32:54,375 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:55,407 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:55,865 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:55,935 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:56,004 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:32:56,005 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:32:56,031 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:32:56,032 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:56,321 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:56,410 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:32:56,410 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:56,854 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:32:57,499 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:32:57,580 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:57,698 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:32:57,699 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:32:57,803 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:32:58,546 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:32:58,565 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:33:00,849 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:33:00,851 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000
2021-01-04 02:33:00,948 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:33:00,978 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:33:00,987 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:33:53,023 - octoprint.server.preemptive_cache - INFO - ... done in 11.56s
2021-01-04 02:33:53,023 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:33:53,321 - octoprint.server.preemptive_cache - INFO - ... done in 0.30s
2021-01-04 02:33:58,500 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline"
2021-01-04 02:33:58,513 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:34:02,481 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:34:02,482 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:34:02,482 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:34:02,483 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:34:02,515 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:34:02,518 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:34:02,561 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:34:02,582 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:34:02,681 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:34:05,372 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:34:05,389 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:34:05,397 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:34:06,827 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:34:07,476 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:34:07,480 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:34:09,790 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:34:09,801 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:34:09,823 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:34:09,832 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:34:09,842 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:34:09,845 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:34:09,849 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:34:10,892 - octoprint.util.comm - INFO - Externally triggered heatup detected
2021-01-04 02:35:07,033 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 12, current line = 14
| Last lines in terminal:
| Recv: T:210.70 /215 B:65.06 /65 B@:0 @:86
| Recv: T:212.28 /215 B:65.02 /65 B@:0 @:51
| Recv: T:213.33 /215 B:65.02 /65 B@:0 @:74
| Recv: T:214.39 /215 B:65.06 /65 B@:0 @:49
| Recv: ok 7
| Recv: ok 8
| Send: N9 M82*16
| Recv: ok 9
| Send: N10 M107 T0*80
| Recv: ok 10
| Send: N11 M190 S{material_bed_temperature_layer_0}*57
| Recv: ok 11
| Send: N12 M109 S{material_print_temperature_layer_0} T0*108
| Recv: Unknown command:N11 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N13 G28 X0 Y0*32
| Recv: Error:expected line 12 got 13
| Recv: 
| Recv: Resend:12
2021-01-04 02:35:07,272 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 12, current line = 29
| Last lines in terminal:
| Recv: ok
| Send: N23 G1 Z0.150 F1002*44
| Recv: skip 23
| Recv: ok
| Send: N24 G1 E0.0000 F2100*0
| Recv: skip 24
| Recv: ok
| Send: N25 G92 E0.0000*94
| Recv: skip 25
| Recv: ok
| Send: N26 G1 X16.675 Y-14.440 E0.1410 F1440*46
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X19.440 Y-11.675 E0.2464*66
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.290 E0.2568*79
| Recv: Error:expected line 12 got 28
| Recv: 
| Recv: Resend:12
2021-01-04 02:35:07,397 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 12, current line = 29
| Last lines in terminal:
| Recv: ok
| Send: N23 G1 Z0.150 F1002*44
| Recv: skip 23
| Recv: ok
| Send: N24 G1 E0.0000 F2100*0
| Recv: skip 24
| Recv: ok
| Send: N25 G92 E0.0000*94
| Recv: skip 25
| Recv: ok
| Send: N26 G1 X16.675 Y-14.440 E0.1410 F1440*46
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X19.440 Y-11.675 E0.2464*66
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.290 E0.2568*79
| Recv: Error:expected line 12 got 28
| Recv: 
| Recv: Resend:12
2021-01-04 02:35:07,522 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 12, current line = 29
| Last lines in terminal:
| Recv: ok
| Send: N23 G1 Z0.150 F1002*44
| Recv: skip 23
| Recv: ok
| Send: N24 G1 E0.0000 F2100*0
| Recv: skip 24
| Recv: ok
| Send: N25 G92 E0.0000*94
| Recv: skip 25
| Recv: ok
| Send: N26 G1 X16.675 Y-14.440 E0.1410 F1440*46
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X19.440 Y-11.675 E0.2464*66
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.290 E0.2568*79
| Recv: Error:expected line 12 got 28
| Recv: 
| Recv: Resend:12
2021-01-04 02:35:07,647 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 12, current line = 29
| Last lines in terminal:
| Recv: ok
| Send: N23 G1 Z0.150 F1002*44
| Recv: skip 23
| Recv: ok
| Send: N24 G1 E0.0000 F2100*0
| Recv: skip 24
| Recv: ok
| Send: N25 G92 E0.0000*94
| Recv: skip 25
| Recv: ok
| Send: N26 G1 X16.675 Y-14.440 E0.1410 F1440*46
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X19.440 Y-11.675 E0.2464*66
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.290 E0.2568*79
| Recv: Error:expected line 12 got 28
| Recv: 
| Recv: Resend:12
2021-01-04 02:35:08,412 - octoprint.util.comm - WARNING - Printer keeps requesting line 12 again and again, communication stuck
2021-01-04 02:35:08,412 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 12 again and again, communication stuck"
2021-01-04 02:35:08,417 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:35:08,419 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:35:08,426 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:35:08,436 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:35:08,446 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:35:08,451 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:35:08,453 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 12 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 12 again and again, communication stuck)"
2021-01-04 02:35:08,459 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:35:08,956 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:36:17,061 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:36:17,062 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:36:17,086 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:36:17,091 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:36:17,102 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:36:17,105 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:36:17,136 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:36:17,173 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:36:21,236 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:36:21,272 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:36:21,292 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:36:21,317 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:36:21,322 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:36:21,328 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:36:21,338 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:36:21,349 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:36:21,602 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 16
| Last lines in terminal:
| Recv: ok 8
| Recv: TargetExtr0:215
| Send: N9 G21*19
| Recv: ok 9
| Send: N10 G90*33
| Recv: ok 10
| Send: N11 M82*41
| Recv: ok 11
| Send: N12 M107 T0*82
| Recv: ok 12
| Send: N13 M190 S{material_bed_temperature_layer_0}*59
| Recv: ok 13
| Send: N14 M109 S{material_print_temperature_layer_0} T0*106
| Recv: Unknown command:N13 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N15 G28 X0 Y0*38
| Recv: Error:expected line 14 got 15
| Recv: 
| Recv: Resend:14
2021-01-04 02:36:22,174 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 M105*28
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:36:22,549 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 M105*28
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:36:22,604 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:36:22,614 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:36:22,624 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:36:22,630 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:36:22,756 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 M105*28
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:36:22,881 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 M105*28
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.675 E0.2464*68
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:36:23,632 - octoprint.util.comm - WARNING - Printer keeps requesting line 14 again and again, communication stuck
2021-01-04 02:36:23,633 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 14 again and again, communication stuck"
2021-01-04 02:36:23,637 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:36:23,639 - octoprint.plugins.filamentmanager - INFO - Filament used: 22.971199999999993 mm (tool0)
2021-01-04 02:36:23,643 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:36:23,648 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 14 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 14 again and again, communication stuck)"
2021-01-04 02:36:23,797 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:36:23,807 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:36:23,812 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:36:23,817 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:36:24,300 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:36:32,128 - octoprint.server.api.system - INFO - Performing command for core:reboot: sudo shutdown -r now
2021-01-04 02:36:32,329 - octoprint.server - INFO - Shutting down...
2021-01-04 02:36:32,364 - octoprint.server.api.system - WARNING - Command for core:reboot failed with return code -15:
! STDOUT: 
! STDERR: 
2021-01-04 02:36:33,089 - octoprint.server - INFO - Calling on_shutdown on plugins
2021-01-04 02:36:33,091 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2021-01-04 02:36:33,094 - octoprint.events - INFO - Event loop shut down
2021-01-04 02:36:34,730 - octoprint.server - INFO - Goodbye!
2021-01-04 02:36:41,238 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:36:41,239 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 02:36:41,241 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:36:47,615 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:36:47,616 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:36:47,616 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:36:47,620 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 02:36:47,680 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 02:36:49,469 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 02:36:49,676 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 02:36:49,681 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 02:36:50,436 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 02:36:50,459 - octoprint.server - INFO - Intermediary server started
2021-01-04 02:36:50,479 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 02:36:50,807 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 02:36:50,810 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 02:36:50,810 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 02:36:50,811 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 02:36:50,811 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:36:50,811 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')")
2021-01-04 02:36:50,812 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 02:36:50,812 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 02:36:50,813 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 02:36:50,813 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 02:36:50,813 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 02:36:50,814 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:36:50,814 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2021-01-04 02:36:50,814 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 02:36:50,815 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 02:36:50,818 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 02:36:51,542 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:36:52,153 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:36:52,154 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:36:52,155 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:36:52,386 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:36:52,427 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:36:52,436 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:36:52,579 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 02:36:52,605 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 02:36:52,629 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 02:36:52,640 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 02:36:52,660 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 02:36:53,368 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 02:36:53,466 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 02:36:53,468 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 02:36:53,468 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 02:36:53,469 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 02:36:53,475 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:36:53,477 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 02:36:53,479 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 02:36:54,287 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:36:55,095 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:36:55,106 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 02:36:55,151 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:36:55,215 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:36:55,527 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:36:55,861 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:36:55,867 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:36:55,867 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:36:55,877 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:36:55,878 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:36:56,048 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:36:56,111 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:36:56,417 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:36:56,417 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:36:56,417 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:36:56,460 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:36:56,460 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:36:56,472 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:36:56,854 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:36:58,082 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:36:58,188 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:37:04,538 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:04,855 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:04,856 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:37:06,993 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:21,177 - octoprint.server.preemptive_cache - INFO - ... done in 10.70s
2021-01-04 02:37:21,178 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:37:21,480 - octoprint.server.preemptive_cache - INFO - ... done in 0.30s
2021-01-04 02:37:31,075 - octoprint.server.util.sockjs - INFO - Client connection closed: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:31,968 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:31,969 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:37:32,959 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:32,959 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:37:34,494 - octoprint.server.util.sockjs - INFO - New connection from client: 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:34,570 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:34,570 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:37:35,222 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:37:35,229 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.218
2021-01-04 02:37:35,566 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:37:36,408 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client 2600:6c48:437f:f5f6:90ac:2def:4d5c:13a1
2021-01-04 02:37:38,148 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:37:38,169 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:37:38,170 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:37:38,170 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:37:38,220 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:37:38,250 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:37:38,252 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2021-01-04 02:37:38,270 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:37:38,271 - octoprint.util.comm - WARNING - Printer requested line 14 but no sufficient history is available, can't resend. Printer requested line 14, current line is 1, line history has 1 entries.
2021-01-04 02:37:38,271 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 1
| Last lines in terminal:
| Changing monitoring state from "Offline" to "Detecting serial connection"
| Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
| Trying port /dev/ttyUSB0, baudrate 115200
| Connecting to port /dev/ttyUSB0, baudrate 115200
| Handshake attempt #1 with timeout 2.0s
| Connected to: Serial<id=0x7f7007eba8, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
| Send: N0 M110 N0*125
| Recv: Error:Format error
| Recv: 
| Handshake attempt #2 with timeout 2.0s
| Send: N0 M110 N0*125
| Recv: Resend:14
| Printer requested line 14 but no sufficient history is available, can't resend
2021-01-04 02:37:38,341 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:37:42,858 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:37:42,895 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:37:42,903 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:37:43,981 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:37:43,989 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:37:44,546 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:37:44,548 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:37:44,553 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:37:44,565 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:37:44,571 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:38:10,328 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:38:11,912 - octoprint.util.comm - INFO - Cancelling job on behalf of user Randy1727
2021-01-04 02:38:11,917 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling"
2021-01-04 02:38:11,944 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:38:11,950 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:38:11,958 - octoprint.plugins.filamentreload - INFO - PrintCancelled: Disabling filament sensor.
2021-01-04 02:38:12,095 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:38:12,098 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:38:14,343 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:38:16,350 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:38:18,355 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:38:20,367 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:38:22,379 - octoprint.util.comm - INFO - No response from printer after 6 consecutive communication timeouts, considering it dead.
2021-01-04 02:38:22,393 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:38:22,409 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2021-01-04 02:38:22,416 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:38:29,046 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:38:29,074 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:38:29,075 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:38:29,075 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:38:29,171 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:38:29,209 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:38:29,277 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:38:29,293 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:38:29,405 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:38:32,015 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:38:32,033 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:38:32,040 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:38:33,119 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:38:33,128 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:38:34,109 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:38:34,117 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:38:34,122 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:38:34,145 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:38:34,152 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:38:34,163 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:38:34,167 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:38:34,318 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 16
| Last lines in terminal:
| Recv: ok 8
| Send: N9 M105*46
| Recv: ok 9
| Send: N10 G90*33
| Recv: T:215.09 /215 B:65.06 /65 B@:0 @:94
| Recv: ok 10
| Send: N11 M82*41
| Recv: ok 11
| Send: N12 M107 T0*82
| Recv: ok 12
| Send: N13 M190 S{material_bed_temperature_layer_0}*59
| Recv: ok 13
| Send: N14 M109 S{material_print_temperature_layer_0} T0*106
| Recv: Unknown command:N13 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N15 G28 X0 Y0*38
| Recv: Error:expected line 14 got 15
| Recv: 
| Recv: Resend:14
2021-01-04 02:38:34,559 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.675 E0.2464*76
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.290 E0.2568*70
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:38:34,692 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.675 E0.2464*76
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.290 E0.2568*70
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:38:34,820 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.675 E0.2464*76
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.290 E0.2568*70
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:38:34,946 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 14, current line = 31
| Last lines in terminal:
| Recv: ok
| Send: N25 G1 Z0.150 F1002*42
| Recv: skip 25
| Recv: ok
| Send: N26 G1 E0.0000 F2100*2
| Recv: skip 26
| Recv: ok
| Send: N27 G92 E0.0000*92
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X16.675 Y-14.440 E0.1410 F1440*32
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.675 E0.2464*76
| Recv: skip 29
| Recv: ok
| Send: N30 G1 X19.440 Y-11.290 E0.2568*70
| Recv: Error:expected line 14 got 30
| Recv: 
| Recv: Resend:14
2021-01-04 02:38:35,707 - octoprint.util.comm - WARNING - Printer keeps requesting line 14 again and again, communication stuck
2021-01-04 02:38:35,708 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 14 again and again, communication stuck"
2021-01-04 02:38:35,712 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:38:35,715 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:38:35,721 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:38:35,729 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:38:35,734 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 14 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 14 again and again, communication stuck)"
2021-01-04 02:38:35,742 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:38:35,751 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:38:35,756 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:38:36,237 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:42:36,488 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:42:36,489 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 57600
2021-01-04 02:42:36,543 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:42:36,547 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:43:00,504 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline"
2021-01-04 02:43:00,511 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:43:01,817 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:43:02,043 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:43:02,043 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:43:03,478 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:43:03,479 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 57600
2021-01-04 02:43:03,495 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:43:03,512 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:43:03,516 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:43:03,521 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:41:08,419 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:41:08,421 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2021-01-04 02:41:08,423 - octoprint.startup - INFO - ******************************************************************************
2021-01-04 02:41:14,796 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:41:14,797 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:41:14,798 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:41:14,802 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2021-01-04 02:41:14,862 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-01-04 02:41:16,656 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled.
2021-01-04 02:41:16,862 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control
2021-01-04 02:41:16,866 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 32 mixin implementations, 61 hook handlers
2021-01-04 02:41:17,592 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2021-01-04 02:41:17,617 - octoprint.server - INFO - Intermediary server started
2021-01-04 02:41:17,636 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-01-04 02:41:17,953 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-01-04 02:41:17,956 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2021-01-04 02:41:17,956 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2021-01-04 02:41:17,957 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2021-01-04 02:41:17,957 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2021-01-04 02:41:17,957 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')")
2021-01-04 02:41:17,958 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2021-01-04 02:41:17,958 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2021-01-04 02:41:17,958 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2021-01-04 02:41:17,959 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2021-01-04 02:41:17,959 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2021-01-04 02:41:17,959 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:41:17,960 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2021-01-04 02:41:17,960 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2021-01-04 02:41:17,960 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2021-01-04 02:41:17,963 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2021-01-04 02:41:18,674 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:41:19,284 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:41:19,286 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:41:19,286 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:41:19,529 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:41:19,568 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:41:19,576 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:41:19,720 - octoprint.plugin.core - INFO - Initialized 32 plugin implementation(s)
2021-01-04 02:41:19,745 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Autoscroll (0.0.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_autoscroll
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_bedlevelvisualizer
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_Change_Filament
|  Consolidate Temp Control (0.1.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_consolidate_temp_control
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Cura Thumbnails (0.2.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ultimakerformatpackage
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Emergency Stop Simplified (0.1.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_emergencystopsimplified
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Filament Manager (1.6.3) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentmanager
|  Filament Sensor Reloaded (1.3.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  Fullscreen Plugin (0.0.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_fullscreen
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_multi_colors
|  MyMiniFactory (0.1.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_myminifactory
| !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  STL Viewer (0.4.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_stlviewer
|  Thingiverse Plugin (1.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_thingiverse
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  ΔµCalibrator (1.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DuCalibrator
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-01-04 02:41:19,769 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 3928301568
|  os:
|      bits: 64
|      id: linux
|      platform: linux
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.2
|          octopi_version: 0.18.0
|          throttle_state: '0x0'
|  python:
|      pip: 20.2.4
|      version: 3.7.3
|      virtualenv: /home/pi/oprint
2021-01-04 02:41:19,779 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-01-04 02:41:19,797 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-01-04 02:41:20,508 - octoprint.server - INFO - Shutting down intermediary server...
2021-01-04 02:41:20,630 - octoprint.server - INFO - Intermediary server shut down
2021-01-04 02:41:20,631 - octoprint.events - INFO - Processing startup event, this is our first event
2021-01-04 02:41:20,632 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-01-04 02:41:20,636 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-01-04 02:41:20,639 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2021-01-04 02:41:20,641 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2021-01-04 02:41:20,643 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-01-04 02:41:21,450 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:41:22,255 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:41:22,304 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-01-04 02:41:22,342 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:41:23,048 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:41:23,055 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:41:23,076 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:41:23,164 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:41:23,164 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:41:23,478 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:41:26,867 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:41:26,869 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:41:26,876 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:41:26,877 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:41:26,878 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:41:26,995 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 02:41:26,997 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:41:26,997 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:41:26,998 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:41:27,013 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:41:27,014 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:41:27,015 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:41:27,927 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://flsun.local/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:44:19,072 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:44:26,696 - octoprint.server.preemptive_cache - INFO - ... done in 15.90s
2021-01-04 02:44:26,697 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.187/', 'path': '/', 'query_string': 'l10n=en'}
2021-01-04 02:44:27,076 - octoprint.server.preemptive_cache - INFO - ... done in 0.38s
2021-01-04 02:44:27,241 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:44:27,241 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:44:30,159 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.218
2021-01-04 02:44:30,379 - octoprint.server.util.flask - INFO - Passively logging in user Randy1727 from ::ffff:192.168.1.218
2021-01-04 02:44:30,379 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:44:32,154 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:44:32,173 - octoprint.server.util.sockjs - INFO - User Randy1727 logged in on the socket from client ::ffff:192.168.1.218
2021-01-04 02:44:32,810 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:44:32,834 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:44:34,297 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:44:34,559 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 02:45:00,540 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:45:00,588 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:45:00,588 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:45:00,589 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:45:00,710 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:45:00,738 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:45:00,812 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:45:00,827 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:45:00,899 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:45:04,637 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:45:04,655 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:45:04,660 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:45:04,688 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:45:04,696 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:45:04,704 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: UrbanAtWork_GearHeart_V1_8.gcode, owner: Randy1727, user: Randy1727
2021-01-04 02:45:04,728 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:45:04,767 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:45:05,906 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:45:05,919 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:45:05,928 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584238, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:45:05,932 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:45:36,004 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:46:06,034 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:46:13,296 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 18, current line = 20
| Last lines in terminal:
| Recv: T:214.56 /215 B:64.98 /65 B@:255 @:93
| Recv: ok 12
| Recv: T:214.56 /215 B:64.98 /65 B@:255 @:93
| Recv: ok 13
| Send: N14 G90*37
| Recv: ok 14
| Send: N15 M82*45
| Recv: ok 15
| Send: N16 M107 T0*86
| Recv: ok 16
| Send: N17 M190 S{material_bed_temperature_layer_0}*63
| Recv: ok 17
| Send: N18 M109 S{material_print_temperature_layer_0} T0*102
| Recv: Unknown command:N17 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N19 G28 X0 Y0*42
| Recv: Error:expected line 18 got 19
| Recv: 
| Recv: Resend:18
2021-01-04 02:46:13,535 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 18, current line = 35
| Last lines in terminal:
| Recv: ok
| Send: N29 G1 Z0.150 F1002*38
| Recv: skip 29
| Recv: ok
| Send: N30 G1 E0.0000 F2100*5
| Recv: skip 30
| Recv: ok
| Send: N31 G92 E0.0000*91
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X16.675 Y-14.440 E0.1410 F1440*43
| Recv: skip 32
| Recv: ok
| Send: N33 G1 X19.440 Y-11.675 E0.2464*71
| Recv: skip 33
| Recv: ok
| Send: N34 G1 X19.440 Y-11.290 E0.2568*66
| Recv: Error:expected line 18 got 34
| Recv: 
| Recv: Resend:18
2021-01-04 02:46:13,665 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 18, current line = 35
| Last lines in terminal:
| Recv: ok
| Send: N29 G1 Z0.150 F1002*38
| Recv: skip 29
| Recv: ok
| Send: N30 G1 E0.0000 F2100*5
| Recv: skip 30
| Recv: ok
| Send: N31 G92 E0.0000*91
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X16.675 Y-14.440 E0.1410 F1440*43
| Recv: skip 32
| Recv: ok
| Send: N33 G1 X19.440 Y-11.675 E0.2464*71
| Recv: skip 33
| Recv: ok
| Send: N34 G1 X19.440 Y-11.290 E0.2568*66
| Recv: Error:expected line 18 got 34
| Recv: 
| Recv: Resend:18
2021-01-04 02:46:13,790 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 18, current line = 35
| Last lines in terminal:
| Recv: ok
| Send: N29 G1 Z0.150 F1002*38
| Recv: skip 29
| Recv: ok
| Send: N30 G1 E0.0000 F2100*5
| Recv: skip 30
| Recv: ok
| Send: N31 G92 E0.0000*91
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X16.675 Y-14.440 E0.1410 F1440*43
| Recv: skip 32
| Recv: ok
| Send: N33 G1 X19.440 Y-11.675 E0.2464*71
| Recv: skip 33
| Recv: ok
| Send: N34 G1 X19.440 Y-11.290 E0.2568*66
| Recv: Error:expected line 18 got 34
| Recv: 
| Recv: Resend:18
2021-01-04 02:46:13,914 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 18, current line = 35
| Last lines in terminal:
| Recv: ok
| Send: N29 G1 Z0.150 F1002*38
| Recv: skip 29
| Recv: ok
| Send: N30 G1 E0.0000 F2100*5
| Recv: skip 30
| Recv: ok
| Send: N31 G92 E0.0000*91
| Recv: skip 31
| Recv: ok
| Send: N32 G1 X16.675 Y-14.440 E0.1410 F1440*43
| Recv: skip 32
| Recv: ok
| Send: N33 G1 X19.440 Y-11.675 E0.2464*71
| Recv: skip 33
| Recv: ok
| Send: N34 G1 X19.440 Y-11.290 E0.2568*66
| Recv: Error:expected line 18 got 34
| Recv: 
| Recv: Resend:18
2021-01-04 02:46:14,679 - octoprint.util.comm - WARNING - Printer keeps requesting line 18 again and again, communication stuck
2021-01-04 02:46:14,679 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 18 again and again, communication stuck"
2021-01-04 02:46:14,683 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:46:14,686 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:46:14,691 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:46:14,699 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:46:14,722 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 18 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 18 again and again, communication stuck)"
2021-01-04 02:46:14,742 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:46:14,751 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:46:14,765 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:46:15,234 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:46:38,019 - octoprint.plugins.logging - INFO - Setting logger octoprint level to 40
2021-01-04 02:46:38,023 - octoprint.plugins.logging - INFO - Setting logger octoprint.access level to 50
2021-01-04 02:46:38,025 - octoprint - ERROR - Exception on /plugin/logging/setup/levels [PUT]
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 2447, in wsgi_app
    response = self.full_dispatch_request()
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1952, in full_dispatch_request
    rv = self.handle_user_exception(e)
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1821, in handle_user_exception
    reraise(exc_type, exc_value, tb)
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/_compat.py", line 39, in reraise
    raise value
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1950, in full_dispatch_request
    rv = self.dispatch_request()
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1936, in dispatch_request
    return self.view_functions[rule.endpoint](**req.view_args)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1539, in decorated_view
    return func(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/access/permissions.py", line 183, in _decorated
    rv = f(*args, **kw)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging/__init__.py", line 129, in set_logging_levels_api
    self._set_logging_levels(json_data)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging/__init__.py", line 242, in _set_logging_levels
    self._logger.manager.loggerDict[logger].setLevel(level)
AttributeError: 'PlaceHolder' object has no attribute 'setLevel'
2021-01-04 02:46:38,038 - tornado.access - ERROR - 500 PUT /plugin/logging/setup/levels (::ffff:192.168.1.218) 42.80ms
2021-01-04 02:47:16,342 - tornado.access - WARNING - 404 GET /downloads/files/local/UrbanAtWork_GearHeart_V1_8.gcode (::ffff:192.168.1.218) 12.19ms
2021-01-04 02:47:30,581 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:47:30,583 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:47:30,616 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:47:30,621 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:47:30,629 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:47:30,649 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:47:30,782 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:47:30,838 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:47:34,351 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Printer_parts/FQQS_all.gcode' selected. Determining number of layers.
2021-01-04 02:47:34,361 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:47:34,390 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:47:34,399 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:47:34,411 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:47:34,421 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:47:36,454 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:47:36,465 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:47:36,475 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'FQQS_all.gcode', 'path': 'Printer_parts/FQQS_all.gcode', 'origin': 'local', 'size': 10891556, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:47:36,481 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:47:46,628 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-01-04 02:47:46,991 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-01-04 02:46:04,581 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 02:46:04,582 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 02:46:04,584 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 02:46:08,468 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:46:09,080 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 02:46:09,082 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:46:09,082 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:46:09,309 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 02:46:09,348 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 02:46:09,360 - octoprint.plugins.filamentreload - INFO - Running RPi.GPIO version '0.7.0'
2021-01-04 02:46:11,248 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 02:46:12,053 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 02:46:12,058 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 02:46:12,154 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:46:12,491 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 02:46:12,874 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 02:46:12,886 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 02:46:12,886 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 02:46:12,896 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 02:46:12,896 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 02:46:13,083 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 02:46:13,144 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 02:46:13,442 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 02:46:13,443 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 02:46:13,443 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:46:13,475 - octoprint.plugins.filamentreload - INFO - Filament Sensor Reloaded started
2021-01-04 02:46:13,476 - octoprint.plugins.filamentreload - INFO - Pin not configured, won't work unless configured!
2021-01-04 02:46:13,497 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 02:46:13,748 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:46:14,932 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 02:46:17,302 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:46:21,854 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:48:56,736 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:49:01,811 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:49:02,504 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 02:52:27,148 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 02:52:27,182 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 02:52:27,183 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:52:27,184 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:52:27,242 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 02:52:27,260 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:52:27,320 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 02:52:27,343 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:52:27,487 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:52:34,560 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2021-01-04 02:52:34,560 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2021-01-04 02:52:43,602 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:52:43,606 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:52:43,793 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:52:43,802 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2021-01-04 02:52:43,946 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:52:44,292 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:52:44,304 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:52:44,594 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-01-04 02:52:45,372 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:52:45,383 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:52:45,393 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584943, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:52:45,398 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:53:24,666 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-01-04 02:53:30,708 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:53:36,713 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:53:37,708 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 02:53:42,719 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:53:48,725 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:53:54,733 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:00,739 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:06,744 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:12,750 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:18,756 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:24,762 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:30,767 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:36,773 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:42,779 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:48,784 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-01-04 02:54:53,649 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 20, current line = 33
| Last lines in terminal:
| Recv: ok 14
| Send: N28 G90*42
| Recv: T:214.91 /215 B:64.94 /65 B@:255 @:40
| Recv: ok 15
| Send: N29 M82*34
| Recv: T:214.91 /215 B:64.94 /65 B@:255 @:40
| Recv: ok 16
| Recv: T:214.91 /215 B:64.94 /65 B@:255 @:40
| Recv: ok 17
| Recv: T:214.91 /215 B:64.94 /65 B@:255 @:40
| Send: N30 M107 T0*82
| Recv: ok 18
| Send: N31 M190 S{material_bed_temperature_layer_0}*59
| Recv: T:214.91 /215 B:64.94 /65 B@:255 @:40
| Recv: ok 19
| Recv: T:215.26 /215 B:65.06 /65 B@:0 @:0
| Recv: Error:expected line 20 got 27
| Recv: 
| Send: N32 M109 S{material_print_temperature_layer_0} T0*110
| Recv: Resend:20
2021-01-04 02:54:53,736 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 32, current line = 34
| Last lines in terminal:
| Recv: ok 26
| Send: N28 G90*42
| Recv: T:215.26 /215 B:65.06 /65 B@:0 @:0
| Recv: ok 27
| Send: N29 M82*34
| Recv: T:215.26 /215 B:65.06 /65 B@:0 @:0
| Recv: ok 28
| Recv: ok 29
| Send: N30 M107 T0*82
| Recv: ok 30
| Send: N31 M190 S{material_bed_temperature_layer_0}*59
| Recv: ok 31
| Send: N32 M109 S{material_print_temperature_layer_0} T0*110
| Recv: Unknown command:N31 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N33 G28 X0 Y0*34
| Recv: Error:expected line 32 got 33
| Recv: 
| Recv: Resend:32
2021-01-04 02:54:54,008 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 32, current line = 49
| Last lines in terminal:
| Recv: ok
| Send: N43 G1 Z0.150 F1002*42
| Recv: skip 43
| Recv: ok
| Send: N44 G1 E0.0000 F2100*6
| Recv: skip 44
| Recv: ok
| Send: N45 G92 E0.0000*88
| Recv: skip 45
| Recv: ok
| Send: N46 G1 X16.675 Y-14.440 E0.1410 F1440*40
| Recv: skip 46
| Recv: ok
| Send: N47 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 47
| Recv: ok
| Send: N48 G1 X19.440 Y-11.290 E0.2568*73
| Recv: Error:expected line 32 got 48
| Recv: 
| Recv: Resend:32
2021-01-04 02:54:54,154 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 32, current line = 49
| Last lines in terminal:
| Recv: ok
| Send: N43 G1 Z0.150 F1002*42
| Recv: skip 43
| Recv: ok
| Send: N44 G1 E0.0000 F2100*6
| Recv: skip 44
| Recv: ok
| Send: N45 G92 E0.0000*88
| Recv: skip 45
| Recv: ok
| Send: N46 G1 X16.675 Y-14.440 E0.1410 F1440*40
| Recv: skip 46
| Recv: ok
| Send: N47 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 47
| Recv: ok
| Send: N48 G1 X19.440 Y-11.290 E0.2568*73
| Recv: Error:expected line 32 got 48
| Recv: 
| Recv: Resend:32
2021-01-04 02:54:54,296 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 32, current line = 49
| Last lines in terminal:
| Recv: ok
| Send: N43 G1 Z0.150 F1002*42
| Recv: skip 43
| Recv: ok
| Send: N44 G1 E0.0000 F2100*6
| Recv: skip 44
| Recv: ok
| Send: N45 G92 E0.0000*88
| Recv: skip 45
| Recv: ok
| Send: N46 G1 X16.675 Y-14.440 E0.1410 F1440*40
| Recv: skip 46
| Recv: ok
| Send: N47 G1 X19.440 Y-11.675 E0.2464*68
| Recv: skip 47
| Recv: ok
| Send: N48 G1 X19.440 Y-11.290 E0.2568*73
| Recv: Error:expected line 32 got 48
| Recv: 
| Recv: Resend:32
2021-01-04 02:54:55,300 - octoprint.util.comm - WARNING - Printer keeps requesting line 32 again and again, communication stuck
2021-01-04 02:54:55,301 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 32 again and again, communication stuck"
2021-01-04 02:54:55,309 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:54:55,319 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 02:54:55,352 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:54:55,374 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 32 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 32 again and again, communication stuck)"
2021-01-04 02:54:55,389 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:54:55,454 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:54:55,488 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:54:55,513 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:54:55,888 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:55:12,051 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2021-01-04 02:55:12,052 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2021-01-04 02:55:17,922 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-01-04 02:55:17,924 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 02:55:18,136 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-01-04 02:55:18,142 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:55:18,234 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:55:18,314 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-01-04 02:55:18,575 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:55:18,630 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 02:55:25,670 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Printer_parts/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 02:55:25,766 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:55:25,845 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2021-01-04 02:55:28,057 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 02:55:28,119 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 02:55:28,466 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 02:55:28,551 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 02:55:28,935 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 15
| Last lines in terminal:
| Recv: ok 7
| Recv: TargetExtr0:215
| Send: N8 G21*18
| Recv: ok 8
| Send: N9 G90*25
| Recv: ok 9
| Send: N10 M82*40
| Recv: ok 10
| Send: N11 M107 T0*81
| Recv: ok 11
| Send: N12 M190 S{material_bed_temperature_layer_0}*58
| Recv: ok 12
| Send: N13 M109 S{material_print_temperature_layer_0} T0*109
| Recv: Unknown command:N12 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N14 G28 X0 Y0*39
| Recv: Error:expected line 13 got 14
| Recv: 
| Recv: Resend:13
2021-01-04 02:55:29,401 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:55:29,413 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 02:55:29,429 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'Printer_parts/UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584943, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 02:55:29,439 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 M117 0% L=1/55*101
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 02:55:29,447 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 02:55:29,592 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 M117 0% L=1/55*101
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 02:55:29,732 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 M117 0% L=1/55*101
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 02:55:29,867 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 M117 0% L=1/55*101
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 02:55:30,632 - octoprint.util.comm - WARNING - Printer keeps requesting line 13 again and again, communication stuck
2021-01-04 02:55:30,633 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 13 again and again, communication stuck"
2021-01-04 02:55:30,639 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 02:55:30,645 - octoprint.plugins.filamentmanager - INFO - Filament used: 29.21759999999998 mm (tool0)
2021-01-04 02:55:30,650 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 02:55:30,678 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 02:55:30,686 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 13 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 13 again and again, communication stuck)"
2021-01-04 02:55:30,701 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 02:55:30,717 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 02:55:30,724 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 02:55:31,197 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 02:55:51,549 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 02:55:51,555 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 02:55:57,292 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:01:01,988 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-04 03:01:02,013 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2021-01-04 03:01:02,014 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-01-04 03:01:02,014 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-01-04 03:01:02,092 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-01-04 03:01:02,120 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 03:01:02,194 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-04 03:01:02,212 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 03:01:02,325 - octoprint.util.comm - INFO - Printer reports firmware name "Robin"
2021-01-04 03:01:04,765 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Printer_parts/UrbanAtWork_GearHeart_V1_8.gcode' selected. Determining number of layers.
2021-01-04 03:01:04,775 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-01-04 03:01:05,801 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-01-04 03:01:05,821 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-01-04 03:01:06,539 - octoprint.util.comm - INFO - Starting job on behalf of user Randy1727
2021-01-04 03:01:06,542 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-01-04 03:01:06,562 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-01-04 03:01:06,577 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-01-04 03:01:06,593 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'UrbanAtWork_GearHeart_V1_8.gcode', 'path': 'Printer_parts/UrbanAtWork_GearHeart_V1_8.gcode', 'origin': 'local', 'size': 5584943, 'owner': 'Randy1727', 'user': 'Randy1727'}
2021-01-04 03:01:06,612 - octoprint.plugin - ERROR - Error while calling plugin filamentreload
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugin/__init__.py", line 271, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/__init__.py", line 1890, in wrapper
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 195, in on_event
    if event is Events.PRINT_STARTED and self.no_filament() and self.prevent_print:
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_filamentreload/__init__.py", line 177, in no_filament
    nofilament = GPIO.input(self.pin) != self.switch
RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)
2021-01-04 03:01:06,746 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 15
| Last lines in terminal:
| Recv: ok 7
| Recv: TargetExtr0:215
| Send: N8 G21*18
| Recv: ok 8
| Send: N9 G90*25
| Recv: ok 9
| Send: N10 M82*40
| Recv: ok 10
| Send: N11 M107 T0*81
| Recv: ok 11
| Send: N12 M190 S{material_bed_temperature_layer_0}*58
| Recv: ok 12
| Send: N13 M109 S{material_print_temperature_layer_0} T0*109
| Recv: Unknown command:N12 M0 T0  Y0.00 E0.0000 S0 P0 I0.00 R0.00
| Recv: skip 0
| Recv: ok
| Send: N14 G28 X0 Y0*39
| Recv: Error:expected line 13 got 14
| Recv: 
| Recv: Resend:13
2021-01-04 03:01:07,003 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.290 E0.2568*78
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 03:01:07,134 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.290 E0.2568*78
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 03:01:07,264 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.290 E0.2568*78
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 03:01:07,393 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 13, current line = 30
| Last lines in terminal:
| Recv: ok
| Send: N24 G1 Z0.150 F1002*43
| Recv: skip 24
| Recv: ok
| Send: N25 G1 E0.0000 F2100*1
| Recv: skip 25
| Recv: ok
| Send: N26 G92 E0.0000*93
| Recv: skip 26
| Recv: ok
| Send: N27 G1 X16.675 Y-14.440 E0.1410 F1440*47
| Recv: skip 27
| Recv: ok
| Send: N28 G1 X19.440 Y-11.675 E0.2464*77
| Recv: skip 28
| Recv: ok
| Send: N29 G1 X19.440 Y-11.290 E0.2568*78
| Recv: Error:expected line 13 got 29
| Recv: 
| Recv: Resend:13
2021-01-04 03:01:08,184 - octoprint.util.comm - WARNING - Printer keeps requesting line 13 again and again, communication stuck
2021-01-04 03:01:08,184 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 13 again and again, communication stuck"
2021-01-04 03:01:08,189 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-01-04 03:01:08,194 - octoprint.plugins.filamentmanager - INFO - Filament used: 32.56799999999999 mm (tool0)
2021-01-04 03:01:08,199 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0
2021-01-04 03:01:08,210 - octoprint.plugins.filamentreload - INFO - Error: Disabling filament sensor.
2021-01-04 03:01:08,218 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Printer keeps requesting line 13 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 13 again and again, communication stuck)"
2021-01-04 03:01:08,225 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-01-04 03:01:08,245 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-01-04 03:01:08,256 - octoprint.plugins.filamentreload - INFO - PrintFailed: Disabling filament sensor.
2021-01-04 03:01:08,721 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2021-01-04 03:20:28,417 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:28:15,461 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:28:17,561 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:28:21,007 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:28:22,016 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 03:32:06,294 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/OctoPrint/OctoPrint-FirmwareUpdater/archive/master.zip
2021-01-04 03:32:14,811 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Firmware Updater, version 1.7.6
2021-01-04 03:36:07,678 - octoprint.plugins.pluginmanager - INFO - Plugin filamentreload uninstalled
2021-01-04 03:36:07,681 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin filamentreload...
2021-01-04 03:36:42,403 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:24:55,494 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2021-01-04 03:24:55,495 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2021-01-04 03:24:55,497 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2021-01-04 03:24:59,597 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 03:25:00,216 - octoprint.util.pip - INFO - Version of pip is 20.2.4
2021-01-04 03:25:00,217 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 03:25:00,217 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 03:25:00,455 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-01-04 03:25:00,494 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-01-04 03:25:02,340 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._http._tcp.local.' for _http._tcp.local.
2021-01-04 03:25:03,148 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "FLSUN"._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-01-04 03:25:03,153 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "FLSUN" for SSDP
2021-01-04 03:25:03,263 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 03:25:03,653 - octoprint.plugins.myminifactory - INFO - Connected to MyMiniFactory
2021-01-04 03:25:03,945 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 03:25:03,951 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 03:25:03,952 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 03:25:04,017 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.9GB. That is considered sufficient for updating.
2021-01-04 03:25:04,018 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2021-01-04 03:25:04,232 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2021-01-04 03:25:04,343 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-01-04 03:25:04,661 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 03:25:05,581 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-01-04 03:25:05,729 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2021-01-04 03:25:05,730 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-01-04 03:25:05,730 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-01-04 03:25:05,834 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-01-04 03:25:05,836 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-01-04 03:25:05,836 - octoprint.plugins.emergencystopsimplified - INFO - Emergency Stop Simplified started
2021-01-04 03:25:05,836 - octoprint.plugins.emergencystopsimplified - INFO - Pin not configured, won't work unless configured!
2021-01-04 03:25:05,848 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-01-04 03:45:09,886 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:45:11,317 - octoprint.access.users - INFO - Logged in user: Randy1727
2021-01-04 03:45:12,388 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{'command': 'settings'}'
2021-01-04 03:45:41,241 - octoprint.access.users - INFO - Logged in user: Randy1727