2021-03-08 17:33:26,463 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-08 17:33:26,466 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-08 17:33:26,469 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-08 17:33:26,498 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.0GB. That is considered sufficient for updating.
2021-03-08 17:33:26,503 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-08 17:33:26,505 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2021-03-08 17:33:26,518 - octoprint.server - INFO - OctoPrint 1.5.0
2021-03-08 17:33:26,528 - octoprint.plugin.core - INFO - 27 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer
|  Cancel Objects (0.4.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject
|  Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  CuraEngine Legacy (1.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_curalegacy
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress
|  EEPROM Printrbot variation of Marlin Editor Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin_printrbot
|  Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  Multi Colors (1.0.17) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multi_colors
| !Octolapse (0.4.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  PSU Control (0.1.9) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_psucontrol
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  System Command Editor (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_systemcommandeditor
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2021-03-08 17:33:26,568 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details:
|  hardware:
|      cores: 4
|      freq: 1200.0
|      ram: 917016576
|  os:
|      bits: 32
|      id: linux
|      platform: linux2
|  plugins:
|      pi_support:
|          model: Raspberry Pi 3 Model B Rev 1.2
|          octopi_version: 0.16.0
|          throttle_state: '0x50005'
|  python:
|      pip: '20.3'
|      version: 2.7.13
|      virtualenv: /home/pi/oprint
2021-03-08 17:33:26,572 - octoprint.server - INFO - ------------------------------------------------------------------------------
2021-03-08 17:33:27,325 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-08 17:33:28,255 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-08 17:33:29,425 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 5.5s
2021-03-08 17:33:30,320 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2021-03-08 17:33:32,335 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-08 17:33:34,360 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-08 17:33:36,069 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 5.5s
2021-03-08 17:33:40,639 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-08 17:33:40,651 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-08 17:33:40,654 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-08 17:33:41,207 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2021-03-08 17:33:41,803 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 5.5s
2021-03-08 17:33:47,534 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 5.5s
2021-03-08 17:33:52,465 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-08 17:33:52,504 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-08 17:33:53,458 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 5.7s
2021-03-08 17:33:57,998 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 50}
2021-03-08 17:34:03,513 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'displaylayerprogress:1.24.0,change_filament:0.3.0,cancelobject:0.4.4,bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,multi_colors:1.0.17,curalegacy:1.1.1,eeprom_marlin_printrbot:0.1.0,psucontrol:0.1.9', u'pip': '20.3', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-08 17:34:09,016 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-08 17:36:08,331 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{u'command': u'settings'}'
2021-03-08 17:37:25,091 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 41.87ms
2021-03-08 17:37:32,418 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-03-08 17:38:06,816 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-03-08 17:38:49,932 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0 - Printer halted. kill() called!
| Last lines in terminal:
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: echo:busy: processing
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
| Recv: Error:Printer halted. kill() called!
2021-03-08 17:38:49,938 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Error: Heating failed, system stopped! Heater_ID: 0 - Printer halted. kill() called!"
2021-03-08 17:38:49,945 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2021-03-08 17:38:50,000 - octoprint.util.comm - INFO - Changing monitoring state from "Error: Heating failed, system stopped! Heater_ID: 0 - Printer halted. kill() called!" to "Offline (Error: Heating failed, system stopped! Heater_ID: 0 - Printer halted. kill() called!)"
2021-03-08 17:38:50,120 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 55.15ms
2021-03-08 17:38:50,118 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-03-08 17:38:52,090 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.15ms
2021-03-08 17:38:54,079 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 25.27ms
2021-03-08 17:38:56,080 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.05ms
2021-03-08 17:38:56,376 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {u'throttled_now': True, u'throttled_past': True, u'commerror_text': u'Heating failed, system stopped! Heater_ID: 0 - Printer halted. kill() called!', u'throttled_mask': 327685}
2021-03-08 17:38:58,092 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.94ms
2021-03-08 17:39:00,085 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.23ms
2021-03-08 17:39:02,094 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.34ms
2021-03-08 17:39:04,106 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 24.23ms
2021-03-08 17:39:06,106 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.56ms
2021-03-08 17:39:08,106 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.97ms
2021-03-08 17:39:10,098 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.05ms
2021-03-08 17:39:12,100 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.99ms
2021-03-08 17:39:14,092 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.80ms
2021-03-08 17:39:16,102 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.68ms
2021-03-08 17:39:18,106 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.29ms
2021-03-08 17:39:20,109 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 30.50ms
2021-03-08 17:39:22,105 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.48ms
2021-03-08 17:39:24,095 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.84ms
2021-03-08 17:39:26,111 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.63ms
2021-03-08 17:39:28,093 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.71ms
2021-03-08 17:39:30,099 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.77ms
2021-03-08 17:39:30,471 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2021-03-08 17:39:30,523 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-08 17:39:30,560 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2021-03-08 17:39:30,605 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 17:39:30,632 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 17:39:31,664 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 17:39:32,662 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 24.32ms
2021-03-08 17:39:34,126 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 23.53ms
2021-03-08 17:39:35,584 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2021-03-08 17:39:35,612 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 17:39:35,888 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-08 17:39:41,572 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': u'/dev/ttyUSB0', u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-08 17:43:18,082 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2021-03-08 17:43:18,084 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2021-03-08 17:44:21,339 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/PrintInPlace_Kaleidocycle--tight.gcode' selected. Determining number of layers.
2021-03-08 17:44:21,361 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2021-03-08 17:44:21,374 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-03-08 17:44:21,391 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2021-03-08 17:44:21,508 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 17:44:21,555 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2021-03-08 17:44:29,738 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-03-08 17:44:39,244 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2021-03-08 17:44:39,920 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-03-08 17:44:47,665 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'PrintInPlace_Kaleidocycle--tight.gcode', u'user': u'_api', u'owner': u'_api', u'path': u'PrintInPlace_Kaleidocycle--tight.gcode', u'size': 10420535L}
2021-03-08 17:44:55,051 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'throttled_now': True, u'throttled_mask': 327685, u'file': '99c1fe6b858a27642b0c059fce0af7b2d2017623', u'throttled_past': True}
2021-03-08 17:45:06,361 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-03-08 17:48:58,293 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 950}
2021-03-08 17:49:41,281 - tornado.access - WARNING - 404 POST /api/plugin/printoid (192.168.1.198) 47.86ms
2021-03-08 17:49:44,076 - tornado.access - WARNING - 404 GET /plugin/enclosure/updateUI (192.168.1.198) 18.76ms
2021-03-08 17:49:44,592 - tornado.access - WARNING - 404 POST /plugin/octolapse/loadState (192.168.1.198) 550.23ms
2021-03-08 17:50:36,349 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 17:50:36,411 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 7759, current line = 7761
| Last lines in terminal:
| Recv: ok
| Send: N7752 G1 X110.276 Y96.913 E165.74201*96
| Recv: ok
| Send: N7753 G1 X108.601 Y99.818 E165.83736*96
| Recv: ok
| Send: N7754 G1 X108.502 Y99.99 E165.84301*81
| Recv: ok
| Send: N7755 G1 X108.33 Y99.891 E165.84666*83
| Recv: ok
| Send: N7756 G1 X91.067 Y89.923 E166.41353*80
| Recv: ok
| Send: N7757 G1 X90.61 Y89.639 E166.42883*103
| Recv: ok
| Send: N7758 G1 X90.19 Y89.337 E166.44355*106
| Recv: ok
| Send: N7759 G1 X89.782 Y89.002 E166.45856*90
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N7760 M105*17
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 7758
| Recv: Resend: 7759
2021-03-08 18:03:58,176 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1850}
2021-03-08 18:16:56,031 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 18:16:56,065 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 45635, current line = 45637
| Last lines in terminal:
| Recv: ok
| Send: N45628 G1 X74.058 Y60.69 E1333.91187*108
| Recv: ok
| Send: N45629 G1 X74.634 Y60.629 E1333.93268*83
| Recv: ok
| Send: N45630 G1 X75.22 Y60.601 E1333.95375*106
| Recv: ok
| Send: N45631 G1 X75.784 Y60.609 E1333.97401*94
| Recv: ok
| Send: N45632 G1 X76.351 Y60.652 E1333.99444*83
| Recv: ok
| Send: N45633 G1 X76.909 Y60.728 E1334.01467*94
| Recv: ok
| Send: N45634 G1 X77.475 Y60.841 E1334.0354*104
| Recv: ok
| Send: N45635 G1 X78.018 Y60.984 E1334.05557*81
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N45636 M105*37
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 45634
| Recv: Resend: 45635
2021-03-08 18:17:46,348 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 18:17:46,386 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 46918, current line = 46920
| Last lines in terminal:
| Recv: ok
| Send: N46911 G1 X81.081 Y148.552 E1371.24078*107
| Recv: ok
| Send: N46912 G1 X80.942 Y148.084 E1371.25832*102
| Recv: ok
| Send: N46913 G1 X80.765 Y147.631 E1371.27579*107
| Recv: ok
| Send: N46914 G1 X80.551 Y147.191 E1371.29336*103
| Recv: ok
| Send: N46915 G1 X80.3 Y146.772 E1371.31091*105
| Recv: ok
| Send: N46916 G1 X80.018 Y146.376 E1371.32837*103
| Recv: ok
| Send: N46917 G1 X79.702 Y146.003 E1371.34593*104
| Recv: ok
| Send: N46918 G1 X79.357 Y145.659 E1371.36343*96
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N46919 M105*36
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 46917
| Recv: Resend: 46918
2021-03-08 18:18:58,576 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2750}
2021-03-08 18:22:01,736 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 18:22:01,775 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 54121, current line = 54123
| Last lines in terminal:
| Recv: ok
| Send: N54114 G1 X79.672 Y149.13 E1588.62148*89
| Recv: ok
| Send: N54115 G1 X79.73 Y149.495 E1588.63476*92
| Recv: ok
| Send: N54116 G1 X79.757 Y149.864 E1588.64805*99
| Recv: ok
| Send: N54117 G1 X79.751 Y150.252 E1588.66199*109
| Recv: ok
| Send: N54118 G1 X79.715 Y150.62 E1588.67527*83
| Recv: ok
| Send: N54119 G1 X79.643 Y151 E1588.68916*122
| Recv: ok
| Send: N54120 G1 X79.54 Y151.367 E1588.70286*87
| Recv: ok
| Send: N54121 G1 X79.41 Y151.715 E1588.7162*106
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N54122 M105*39
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 54120
| Recv: Resend: 54121
2021-03-08 18:23:47,969 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 57393, current line = 57395
| Last lines in terminal:
| Send: N57386 G1 X80.371 Y128.486 E1673.36315*96
| Recv: ok
| Send: N57387 G1 X80.528 Y128.107 E1673.3787*94
| Recv: ok
| Send: N57388 G1 X80.651 Y127.717 E1673.39421*98
| Recv: ok
| Send: N57389 G1 X80.74 Y127.316 E1673.40978*88
| Recv: ok
| Send: N57390 G1 X80.793 Y126.909 E1673.42535*108
| Recv: ok
| Send: N57391 G1 X80.811 Y126.504 E1673.44072*105
| Recv: ok
| Send: N57392 G1 X80.811 Y103.804 E1674.30142*102
| Recv: ok
| Send: N57393 G1 X84.961 Y103.803 E1674.45878*96
| Recv: echo:Unknown command: ".45878"
| Recv: ok
| Send: N57394 G1 X85.161 Y103.803 E1674.46636*105
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 57392
| Recv: Resend: 57393
2021-03-08 18:34:02,269 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3650}
2021-03-08 18:37:14,154 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 18:37:14,185 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 80515, current line = 80517
| Last lines in terminal:
| Recv: ok
| Send: N80508 G1 X86.782 Y80.389 E2331.34923*82
| Recv: ok
| Send: N80509 G1 X87.056 Y80.828 E2331.36782*91
| Recv: ok
| Send: N80510 G1 X87.289 Y81.291 E2331.38644*95
| Recv: ok
| Send: N80511 G1 X87.476 Y81.769 E2331.40487*88
| Recv: ok
| Send: N80512 G1 X87.624 Y82.263 E2331.4234*108
| Recv: ok
| Send: N80513 M105*40
| Recv: ok T:204.97 /205.00 B:53.93 /54.00 @:61 B@:127
| Send: N80514 G1 X87.727 Y82.772 E2331.44205*91
| Recv: ok
| Send: N80515 G1 X87.779 Y83.256 E2331.45954*93
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N80516 M105*45
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 80514
| Recv: Resend: 80515
2021-03-08 18:48:58,416 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4550}
2021-03-08 19:01:25,542 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 19:01:25,591 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 117964, current line = 117966
| Last lines in terminal:
| Recv: ok
| Send: N117957 G1 X130.916 Y101.6 E3503.70065*101
| Recv: ok
| Send: N117958 G1 X130.86 Y101.708 E3503.70526*81
| Recv: ok
| Send: N117959 G1 X130.567 Y102.216 E3503.7275*82
| Recv: ok
| Send: N117960 G0 F9000 X130.38 Y102.496*78
| Recv: ok
| Send: N117961 G0 X130.351 Y102.543*21
| Recv: ok
| Send: N117962 G0 X130.346 Y102.549*26
| Recv: ok
| Send: N117963 G0 X130.013 Y102.262*22
| Recv: ok
| Send: N117964 G0 X129.912 Y101.191*29
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N117965 M105*26
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 117963
| Recv: Resend: 117964
2021-03-08 19:03:58,227 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5450}
2021-03-08 19:18:58,074 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6350}
2021-03-08 19:21:37,292 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 151753, current line = 151755
| Last lines in terminal:
| Send: N151746 G1 X82.753 Y131.712 E234.18304*101
| Recv: ok
| Send: N151747 G1 X82.659 Y131.814 E234.18802*107
| Recv: ok
| Send: N151748 G1 X82.402 Y132.082 E234.20136*105
| Recv: ok
| Send: N151749 G1 X82.037 Y132.419 E234.21921*99
| Recv: ok
| Send: N151750 G1 X81.659 Y132.726 E234.2367*80
| Recv: ok
| Send: N151751 G1 X81.238 Y133.027 E234.25529*108
| Recv: ok
| Send: N151752 G1 X81.02 Y133.172 E234.26469*83
| Recv: ok
| Send: N151753 G1 X80.665 Y133.434 E234.28054*103
| Recv: echo:Unknown command: ".28054"
| Recv: ok
| Send: N151754 G1 X80.322 Y133.735 E234.29693*104
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 151752
| Recv: Resend: 151753
2021-03-08 19:33:58,148 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7250}
2021-03-08 19:34:01,583 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 19:34:01,614 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 172681, current line = 172683
| Last lines in terminal:
| Recv: ok
| Send: N172674 G1 X78.874 Y76.217 E812.85584*93
| Recv: ok
| Send: N172675 G1 X79.039 Y76.12 E812.8631*83
| Recv: ok
| Send: N172676 G1 X79.312 Y75.949 E812.87532*89
| Recv: ok
| Send: N172677 G1 X79.729 Y75.652 E812.89473*91
| Recv: ok
| Send: N172678 G1 X79.979 Y75.446 E812.90701*86
| Recv: ok
| Send: N172679 G1 X80.122 Y75.322 E812.91419*89
| Recv: ok
| Send: N172680 G1 X80.359 Y75.1 E812.9265*111
| Recv: ok
| Send: N172681 G1 X80.712 Y74.731 E812.94586*94
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N172682 M105*31
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 172680
| Recv: Resend: 172681
2021-03-08 19:48:58,103 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8150}
2021-03-08 19:51:30,343 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 203431, current line = 203433
| Last lines in terminal:
| Send: N203424 G1 X133.039 Y125.133 E1590.28509*102
| Recv: ok
| Send: N203425 G1 X132.892 Y125.637 E1590.305*108
| Recv: ok
| Send: N203426 G1 X132.719 Y126.119 E1590.32441*109
| Recv: ok
| Send: N203427 G1 X132.51 Y126.605 E1590.34447*93
| Recv: ok
| Send: N203428 G1 X132.278 Y127.059 E1590.36381*106
| Recv: ok
| Send: N203429 G1 X132.141 Y127.299 E1590.37428*105
| Recv: ok
| Send: N203430 G1 X131.983 Y127.557 E1590.38575*103
| Recv: ok
| Send: N203431 G1 X131.807 Y127.817 E1590.39766*99
| Recv: echo:Unknown command: "90.39766"
| Recv: ok
| Send: N203432 G1 X131.65 Y128.036 E1590.40788*86
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 203430
| Recv: Resend: 203431
2021-03-08 19:54:08,811 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 19:54:14,831 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 19:54:14,871 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 207356, current line = 207359
| Last lines in terminal:
| Recv: ok
| Send: N207350 G1 X81.891 Y126.118 E1708.89313*91
| Recv: ok
| Send: N207351 G1 X84.081 Y126.118 E1708.9718*97
| Recv: ok
| Send: N207352 G1 X84.08 Y124.604 E1709.02618*96
| Recv: ok
| Send: N207353 G1 X82.568 Y126.117 E1709.10302*94
| Recv: ok
| Send: N207354 G0 F9000 X82.568 Y126.098*69
| Recv: ok
| Send: N207355 G0 X81.05 Y126.212*22
| Recv: ok
| Send: N207356 G0 X80.987 Y127.292*46
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N207357 M105*19
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N207358 M105*28
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 207355
| Recv: Resend: 207356
2021-03-08 20:00:16,132 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 216179, current line = 216181
| Last lines in terminal:
| Send: N216172 M105*22
| Recv: ok T:204.90 /205.00 B:54.00 /54.00 @:63 B@:127
| Send: N216173 G1 X130.297 Y113.767 E1972.93683*99
| Recv: ok
| Send: N216174 G1 X130.186 Y113.781 E1972.93728*111
| Recv: ok
| Send: N216175 G1 X135.714 Y119.309 E1972.96848*100
| Recv: ok
| Send: N216176 G1 X135.624 Y119.361 E1972.9689*94
| Recv: ok
| Send: N216177 G1 X130.059 Y113.796 E1973.00031*109
| Recv: ok
| Send: N216178 G1 X129.932 Y113.81 E1973.00082*87
| Recv: ok
| Send: N216179 G1 X135.535 Y119.413 E1973.03244*110
| Recv: echo:Unknown command: "73.03244"
| Recv: ok
| Send: N216180 G1 X135.528 Y119.417 E1973.03248*108
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 216178
| Recv: Resend: 216179
2021-03-08 20:03:58,293 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9050}
2021-03-08 20:05:45,268 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 221617, current line = 221619
| Last lines in terminal:
| Send: N221610 G0 X66.393 Y70.014*21
| Recv: ok
| Send: N221611 G0 X66.551 Y68.322*19
| Recv: ok
| Send: N221612 G0 X67.028 Y66.689*16
| Recv: ok
| Send: N221613 G0 X67.655 Y65.463*24
| Recv: ok
| Send: N221614 G0 X68.802 Y63.739*22
| Recv: ok
| Send: N221615 G1 F1500 E2118.37384*3
| Recv: ok
| Send: N221616 M117 65% L=39/82*108
| Recv: ok
| Send: N221617 G1 F1650 X68.786 Y63.755 E2118.3747*63
| Recv: echo:Unknown command: "E2118.3747"
| Recv: ok
| Send: N221618 M105*25
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 221616
| Recv: Resend: 221617
2021-03-08 20:07:59,230 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 20:07:59,268 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 224635, current line = 224637
| Last lines in terminal:
| Recv: ok
| Send: N224628 G1 X153.335 Y107.429 E2210.5792*89
| Recv: ok
| Send: N224629 G1 X153.267 Y107.223 E2210.58743*102
| Recv: ok
| Send: N224630 G1 X153.166 Y106.918 E2210.59961*97
| Recv: ok
| Send: N224631 G1 X153.16 Y106.901 E2210.60029*81
| Recv: ok
| Send: N224632 G1 X153.077 Y106.693 E2210.60878*109
| Recv: ok
| Send: N224633 G1 X152.961 Y106.403 E2210.62063*104
| Recv: ok
| Send: N224634 G1 X152.956 Y106.392 E2210.62108*104
| Recv: ok
| Send: N224635 G1 X152.947 Y106.365 E2210.62216*109
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N224636 M105*16
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 224634
| Recv: Resend: 224635
2021-03-08 20:19:20,929 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9950}
2021-03-08 20:33:49,312 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 20:33:49,348 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 253224, current line = 253226
| Last lines in terminal:
| Recv: ok
| Send: N253217 G1 X102.265 Y129.846 E3453.6032*86
| Recv: ok
| Send: N253218 G1 X106.265 Y136.776 E3453.89062*109
| Recv: ok
| Send: N253219 G1 X103.762 Y138.221 E3453.99444*99
| Recv: ok
| Send: N253220 G0 F9000 X103.616 Y138.767*124
| Recv: ok
| Send: N253221 G1 F3600 X103.417 Y138.421 E3454.00878*8
| Recv: ok
| Send: N253222 G1 X99.215 Y131.145 E3454.31059*89
| Recv: ok
| Send: N253223 G1 X99.561 Y130.946 E3454.32493*87
| Recv: ok
| Send: N253224 G1 X102.411 Y129.3 E3454.44315*109
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N253225 M105*22
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 253223
| Recv: Resend: 253224
2021-03-08 20:48:59,698 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11750}
2021-03-08 20:51:38,461 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 20:51:38,496 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 275633, current line = 275635
| Last lines in terminal:
| Recv: ok
| Send: N275626 G1 X71.586 Y80.392 E136.86626*85
| Recv: ok
| Send: N275627 G1 X71.598 Y79.943 E136.8824*97
| Recv: ok
| Send: N275628 G1 X71.597 Y79.565 E136.89598*90
| Recv: ok
| Send: N275629 G1 X71.586 Y79.208 E136.90881*90
| Recv: ok
| Send: N275630 G1 X71.561 Y78.793 E136.92374*94
| Recv: ok
| Send: N275631 G1 X71.437 Y78.125 E136.94814*93
| Recv: ok
| Send: N275632 G1 X70.804 Y77.758 E136.97443*93
| Recv: ok
| Send: N275633 G1 X70.491 Y77.566 E136.98762*92
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N275634 M105*22
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 275632
| Recv: Resend: 275633
2021-03-08 20:55:03,601 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 20:55:03,637 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 279945, current line = 279947
| Last lines in terminal:
| Recv: ok
| Send: N279938 G0 X103.811 Y128.538*25
| Recv: ok
| Send: N279939 G0 X103.579 Y129.411*16
| Recv: ok
| Send: N279940 G1 F3300 X101.509 Y130.604 E290.29025*62
| Recv: ok
| Send: N279941 G1 X105.23 Y137.05 E290.5576*109
| Recv: ok
| Send: N279942 G1 X107.299 Y135.858 E290.64338*86
| Recv: ok
| Send: N279943 G1 X107.104 Y135.521 E290.65736*88
| Recv: ok
| Send: N279944 G1 X106.049 Y136.576 E290.71096*95
| Recv: ok
| Send: N279945 G1 F1500 E284.21096*55
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N279946 M105*16
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 279944
| Recv: Resend: 279945
2021-03-08 21:03:58,766 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12650}
2021-03-08 21:05:54,504 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 21:06:00,521 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 21:06:00,565 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 293882, current line = 293885
| Last lines in terminal:
| Recv: ok
| Send: N293876 G1 X79.081 Y83.039 E745.13909*81
| Recv: ok
| Send: N293877 G1 X79.08 Y79.08 E745.28131*93
| Recv: ok
| Send: N293878 G1 X67.127 Y67.127 E745.88852*84
| Recv: ok
| Send: N293879 G1 F1500 E739.38852*54
| Recv: ok
| Send: N293880 G0 F9000 X68.997 Y77.159*123
| Recv: ok
| Send: N293881 G0 X68.511 Y78.173*16
| Recv: ok
| Send: N293882 G0 X70.774 Y101.106*38
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N293883 M105*28
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N293884 M105*27
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 293881
| Recv: Resend: 293882
2021-03-08 21:30:05,642 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2021-03-08 21:30:05,675 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 323805, current line = 323807
| Last lines in terminal:
| Recv: ok
| Send: N323798 G0 F9000 X114.114 Y131.393*121
| Recv: ok
| Send: N323799 G1 F2100 X114.665 Y130.841 E1775.47029*0
| Recv: ok
| Send: N323800 G0 F9000 X115.046 Y130.621*125
| Recv: ok
| Send: N323801 G0 X115.363 Y131.313*18
| Recv: ok
| Send: N323802 G0 X109.603 Y134.721*31
| Recv: ok
| Send: N323803 G0 X109.463 Y134.478*21
| Recv: ok
| Send: N323804 G1 F2100 X108.532 Y135.016 E1775.50892*6
| Recv: ok
| Send: N323805 G1 X104.921 Y128.763 E1775.76829*109
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N323806 M105*27
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 323804
| Recv: Resend: 323805
2021-03-08 21:34:00,228 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14450}
2021-03-08 21:48:58,234 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15350}
2021-03-08 21:49:58,430 - octoprint.util.comm - INFO - Finished in 14737.085 s.
2021-03-08 21:49:58,434 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing"
2021-03-08 21:49:58,597 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational"
2021-03-08 21:49:58,598 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2021-03-08 21:50:06,582 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {u'origin': u'local', u'throttled_mask': 327685, u'elapsed': 14737, u'file': '99c1fe6b858a27642b0c059fce0af7b2d2017623', u'throttled_now': True, u'throttled_past': True}
2021-03-08 21:32:34,495 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-08 21:32:34,667 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-08 21:32:34,668 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-08 21:32:41,988 - octoprint.plugins.errortracking - INFO - Initialized error tracking
2021-03-08 21:32:46,159 - octoprint.plugins.cancelobject - INFO - No beforegcode defined
2021-03-08 21:32:46,165 - octoprint.plugins.cancelobject - INFO - No aftergcode defined
2021-03-08 21:32:47,097 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-08 21:32:47,334 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-03-08 21:32:49,952 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-08 21:32:52,392 - octoprint.util.pip - INFO - Version of pip is 20.3
2021-03-08 21:32:52,396 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-08 21:32:52,400 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-08 21:32:52,534 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-08 21:32:52,536 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-08 21:32:52,614 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-08 21:32:57,250 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-08 21:32:57,324 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-08 21:32:57,337 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-08 21:32:57,346 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-08 21:32:57,379 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-08 21:32:57,391 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-08 21:32:58,185 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-08 21:32:59,029 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-08 21:32:59,058 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-08 21:32:59,215 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 94.29ms
2021-03-08 21:32:59,222 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-08 21:32:59,417 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-08 21:32:59,776 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615302981053 (192.168.1.103) 236.77ms
2021-03-09 15:16:23,867 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 15:16:26,164 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-09 15:16:26,222 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615302984053 (192.168.1.103) 148.92ms
2021-03-09 15:16:26,311 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 15:16:26,342 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 15:16:26,346 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 15:16:26,608 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 9.9GB. That is considered sufficient for updating.
2021-03-09 15:16:26,690 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 15:16:27,095 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 15:16:27,276 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302985638 (192.168.1.103) 414.65ms
2021-03-09 15:16:28,449 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615302987053 (192.168.1.103) 59.14ms
2021-03-09 15:16:29,343 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 6.0s
2021-03-09 15:16:29,893 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302988053 (192.168.1.103) 270.93ms
2021-03-09 15:16:31,092 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302990053 (192.168.1.103) 67.46ms
2021-03-09 15:16:32,479 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 15:16:32,605 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 15:16:32,849 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-09 15:16:33,632 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302992053 (192.168.1.103) 85.20ms
2021-03-09 15:16:35,096 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302994054 (192.168.1.103) 63.76ms
2021-03-09 15:16:35,652 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 5.7s
2021-03-09 15:16:36,224 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2021-03-09 15:16:37,135 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302996052 (192.168.1.103) 65.24ms
2021-03-09 15:16:38,384 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 31}
2021-03-09 15:16:39,672 - tornado.access - WARNING - 404 GET /cached.gif?_=1615302998054 (192.168.1.103) 253.98ms
2021-03-09 15:16:41,382 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303000053 (192.168.1.103) 297.05ms
2021-03-09 15:16:43,148 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 6.9s
2021-03-09 15:16:44,324 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303002053 (192.168.1.103) 529.71ms
2021-03-09 15:16:44,475 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'displaylayerprogress:1.24.0,change_filament:0.3.0,cancelobject:0.4.4,bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,multi_colors:1.0.17,curalegacy:1.1.1,eeprom_marlin_printrbot:0.1.0,psucontrol:0.1.9', u'pip': '20.3', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 15:16:46,208 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303005133 (192.168.1.103) 98.90ms
2021-03-09 15:16:48,124 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303007054 (192.168.1.103) 93.87ms
2021-03-09 15:16:50,288 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 15:16:50,291 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303009052 (192.168.1.103) 301.13ms
2021-03-09 15:16:50,339 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 5.9s
2021-03-09 15:16:52,139 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303011053 (192.168.1.103) 148.46ms
2021-03-09 15:16:54,538 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303013053 (192.168.1.103) 415.10ms
2021-03-09 15:16:58,462 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303017053 (192.168.1.103) 170.54ms
2021-03-09 15:17:00,077 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303019053 (192.168.1.103) 87.74ms
2021-03-09 15:17:02,568 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303021053 (192.168.1.103) 514.35ms
2021-03-09 15:17:03,836 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303022813 (192.168.1.103) 60.82ms
2021-03-09 15:17:04,939 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303023932 (192.168.1.103) 63.76ms
2021-03-09 15:17:06,068 - tornado.access - WARNING - 404 GET /cached.gif?_=1615303025033 (192.168.1.103) 58.55ms
2021-03-09 15:17:51,983 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 5.6s
2021-03-09 15:17:58,885 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{u'command': u'settings'}'
2021-03-09 15:18:38,977 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 40.52ms
2021-03-09 15:18:49,964 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-03-09 15:19:02,484 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2021-03-09 15:23:02,355 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2021-03-09 15:23:22,141 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 45.46ms
2021-03-09 15:23:35,695 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 15:23:43,993 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 15:23:43,998 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 15:23:44,002 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 15:23:44,353 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 15:23:44,784 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 304.71ms
2021-03-09 15:24:04,610 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 9.9GB. That is considered sufficient for updating.
2021-03-09 15:24:07,962 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 15:24:17,272 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 15:24:22,294 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 4758.57ms
2021-03-09 15:24:31,327 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 39.87ms
2021-03-09 15:24:36,685 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 15:24:59,514 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 15:25:06,737 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 38.55ms
2021-03-09 15:26:57,146 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{u'command': u'settings'}'
2021-03-09 15:27:05,369 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 56.41ms
2021-03-09 15:31:38,085 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 931}
2021-03-09 15:46:38,075 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1831}
2021-03-09 15:49:02,512 - octoprint.plugins.psucontrol - INFO - Idle timeout reached after 30 minute(s). Turning heaters off prior to shutting off PSU.
2021-03-09 15:49:02,516 - octoprint.plugins.psucontrol - INFO - Heaters below temperature.
2021-03-09 15:49:02,520 - octoprint.plugins.psucontrol - INFO - Switching PSU Off
2021-03-09 15:54:17,545 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {}
2021-03-09 15:54:25,366 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-09 15:54:25,509 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-09 15:54:25,511 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-09 15:54:31,718 - octoprint.plugins.errortracking - INFO - Initialized error tracking
2021-03-09 15:54:35,908 - octoprint.plugins.cancelobject - INFO - No beforegcode defined
2021-03-09 15:54:35,911 - octoprint.plugins.cancelobject - INFO - No aftergcode defined
2021-03-09 15:54:36,840 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-09 15:54:37,087 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-03-09 15:54:39,654 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 15:54:42,106 - octoprint.util.pip - INFO - Version of pip is 20.3.4
2021-03-09 15:54:42,112 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 15:54:42,113 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 15:54:42,261 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-09 15:54:42,265 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-09 15:54:42,337 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-09 15:54:46,809 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-09 15:54:46,910 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-09 15:54:46,912 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-09 15:54:46,916 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-09 15:54:46,932 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-09 15:54:46,946 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 15:54:47,712 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-09 15:54:48,554 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-09 15:54:48,572 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-09 15:54:48,715 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 43.82ms
2021-03-09 15:54:48,798 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-09 15:54:49,020 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-09 15:54:49,164 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615305287053 (192.168.1.103) 343.29ms
2021-03-09 15:54:49,684 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 15:54:49,687 - tornado.access - WARNING - 404 GET /cached.gif?_=1615305287735 (192.168.1.103) 512.12ms
2021-03-09 15:54:51,517 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 15:54:51,521 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 15:54:51,531 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 15:54:52,057 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 9.9GB. That is considered sufficient for updating.
2021-03-09 15:54:52,342 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 15:54:52,438 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-09 15:54:52,802 - tornado.access - WARNING - 404 GET /cached.gif?_=1615305289759 (192.168.1.103) 276.65ms
2021-03-09 15:54:53,063 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 15:54:55,603 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-03-09 15:54:58,033 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 15:54:59,396 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-09 15:55:07,610 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 15:55:07,655 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 15:55:07,658 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 15:55:08,546 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 15:55:08,806 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 15:55:16,200 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 41}
2021-03-09 15:55:22,754 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 15:55:28,932 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'displaylayerprogress:1.24.0,change_filament:0.3.0,cancelobject:0.4.4,bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,multi_colors:1.0.17,curalegacy:1.1.1,eeprom_marlin_printrbot:0.1.0,psucontrol:0.1.9', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 15:56:12,984 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{u'command': u'settings'}'
2021-03-09 15:56:16,853 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 44.96ms
2021-03-09 16:03:09,279 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/barbie_hand_bag_customizable_20160414-21536-16i29hv-0.gcode' selected. Determining number of layers.
2021-03-09 16:03:09,392 - tornado.access - WARNING - 404 POST /api/files/local/CE3_Creality_Spool_Holder_part1.gcode (192.168.1.103) 7172.10ms
2021-03-09 16:03:09,393 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2021-03-09 16:03:13,232 - octoprint.plugins.DisplayLayerProgress - WARNING - No LayerIndicator found!!!
2021-03-09 16:03:13,264 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2021-03-09 16:04:57,549 - tornado.access - WARNING - 404 GET /favicon.ico (185.67.33.243) 30.29ms
2021-03-09 16:07:01,873 - octoprint.plugins.pluginmanager - INFO - Plugin cancelobject uninstalled
2021-03-09 16:07:01,887 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin cancelobject...
2021-03-09 16:07:07,368 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '0.4.4', 'plugin': 'cancelobject'}
2021-03-09 16:07:20,862 - octoprint.plugins.pluginmanager - INFO - Plugin Change_Filament uninstalled
2021-03-09 16:07:20,894 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin Change_Filament...
2021-03-09 16:07:26,384 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '0.3.0', 'plugin': 'Change_Filament'}
2021-03-09 16:07:42,260 - octoprint.plugins.pluginmanager - INFO - Plugin curalegacy uninstalled
2021-03-09 16:07:42,293 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin curalegacy...
2021-03-09 16:07:47,749 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '1.1.1', 'plugin': 'curalegacy'}
2021-03-09 16:08:06,734 - octoprint.plugins.pluginmanager - INFO - Plugin DisplayLayerProgress uninstalled
2021-03-09 16:08:06,767 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin DisplayLayerProgress...
2021-03-09 16:08:12,219 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '1.24.0', 'plugin': 'DisplayLayerProgress'}
2021-03-09 16:08:24,638 - octoprint.plugins.pluginmanager - INFO - Plugin multi_colors uninstalled
2021-03-09 16:08:24,649 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin multi_colors...
2021-03-09 16:08:30,171 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '1.0.17', 'plugin': 'multi_colors'}
2021-03-09 16:08:52,337 - octoprint.plugins.pluginmanager - INFO - Plugin octolapse uninstalled
2021-03-09 16:08:52,347 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin octolapse...
2021-03-09 16:08:58,025 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '0.4.0', 'plugin': 'octolapse'}
2021-03-09 16:09:11,122 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {}
2021-03-09 16:09:18,366 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-09 16:09:18,392 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-09 16:09:18,394 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-09 16:09:23,354 - octoprint.plugins.errortracking - INFO - Initialized error tracking
2021-03-09 16:09:26,981 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-09 16:09:29,591 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:09:31,902 - octoprint.util.pip - INFO - Version of pip is 20.3.4
2021-03-09 16:09:31,907 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:09:31,908 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:09:32,054 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-09 16:09:32,056 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-09 16:09:32,132 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-09 16:09:35,882 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-09 16:09:35,971 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-09 16:09:35,974 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:09:35,981 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:09:35,994 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-09 16:09:36,004 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:09:36,745 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-09 16:09:37,600 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-09 16:09:37,614 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-09 16:09:37,785 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 24.23ms
2021-03-09 16:09:38,055 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-09 16:09:38,179 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-09 16:09:39,606 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:09:41,461 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:09:41,465 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:09:41,478 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:09:41,705 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.4GB. That is considered sufficient for updating.
2021-03-09 16:09:41,709 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 16:09:41,711 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-09 16:09:42,208 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 16:09:45,379 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-03-09 16:09:47,495 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 16:09:47,843 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 16:09:48,025 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-09 16:09:53,758 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27}
2021-03-09 16:09:59,585 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:10:07,376 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,psucontrol:0.1.9,eeprom_marlin_printrbot:0.1.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:11:00,731 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 40.63ms
2021-03-09 16:13:45,793 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-03-09 16:14:02,472 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 41.22ms
2021-03-09 16:14:26,556 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin action_command_notification...
2021-03-09 16:14:36,041 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin action_command_prompt...
2021-03-09 16:15:04,195 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin announcements...
2021-03-09 16:15:10,482 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin tracking...
2021-03-09 16:15:33,942 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin errortracking...
2021-03-09 16:15:41,395 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin file_check...
2021-03-09 16:15:47,937 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin firmware_check...
2021-03-09 16:16:11,508 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-09 16:16:11,514 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-09 16:16:11,515 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-09 16:16:21,235 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-09 16:16:24,080 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:16:26,481 - octoprint.util.pip - INFO - Version of pip is 20.3.4
2021-03-09 16:16:26,484 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:16:26,487 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:16:27,212 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-09 16:16:27,214 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-09 16:16:27,278 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-09 16:16:30,923 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-09 16:16:31,014 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-09 16:16:31,016 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:16:31,020 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:16:31,034 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-09 16:16:31,043 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:16:31,809 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-09 16:16:32,640 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-09 16:16:32,657 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-09 16:16:32,781 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615306589639 (192.168.1.103) 71.47ms
2021-03-09 16:16:32,868 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 25.05ms
2021-03-09 16:16:32,894 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-09 16:16:33,056 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-09 16:16:33,229 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:16:35,171 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306591942 (192.168.1.103) 1499.77ms
2021-03-09 16:16:35,379 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615306592142 (192.168.1.103) 185.43ms
2021-03-09 16:16:35,862 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:16:35,890 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:16:35,893 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:16:37,214 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.6GB. That is considered sufficient for updating.
2021-03-09 16:16:37,220 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 16:16:37,232 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 16:16:38,547 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-03-09 16:16:38,796 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306594444 (192.168.1.103) 56.64ms
2021-03-09 16:16:38,934 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306596946 (192.168.1.103) 55.88ms
2021-03-09 16:16:38,976 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 5.7s
2021-03-09 16:16:40,021 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306598992 (192.168.1.103) 58.11ms
2021-03-09 16:16:41,117 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306600080 (192.168.1.103) 62.74ms
2021-03-09 16:16:42,225 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306601182 (192.168.1.103) 72.01ms
2021-03-09 16:16:43,319 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306602287 (192.168.1.103) 60.98ms
2021-03-09 16:16:44,057 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 16:16:44,127 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 16:16:44,638 - tornado.access - WARNING - 404 GET /cached.gif?_=1615306603377 (192.168.1.103) 290.13ms
2021-03-09 16:16:45,274 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 5.6s
2021-03-09 16:16:51,032 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 5.6s
2021-03-09 16:16:57,829 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 6.6s
2021-03-09 16:17:05,138 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 6.0s
2021-03-09 16:19:13,948 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 174}
2021-03-09 16:19:19,824 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,psucontrol:0.1.9,eeprom_marlin_printrbot:0.1.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:19:23,556 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-03-09 16:19:25,355 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:19:27,265 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 38.94ms
2021-03-09 16:21:08,862 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 38.44ms
2021-03-09 16:21:14,435 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 16:21:28,121 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:21:28,125 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:21:28,129 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:21:34,088 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 16:21:37,708 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 40.06ms
2021-03-09 16:21:48,691 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline"
2021-03-09 16:21:48,734 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2021-03-09 16:21:49,301 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.50ms
2021-03-09 16:21:51,307 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.29ms
2021-03-09 16:21:53,312 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.91ms
2021-03-09 16:21:55,304 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.38ms
2021-03-09 16:21:57,307 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.14ms
2021-03-09 16:21:59,343 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 25.04ms
2021-03-09 16:22:02,796 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 26.71ms
2021-03-09 16:22:03,313 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.73ms
2021-03-09 16:22:05,307 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.32ms
2021-03-09 16:22:07,311 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.66ms
2021-03-09 16:22:09,306 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.33ms
2021-03-09 16:22:11,309 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 22.87ms
2021-03-09 16:22:13,304 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.78ms
2021-03-09 16:22:15,342 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 21.18ms
2021-03-09 16:22:17,314 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 26.57ms
2021-03-09 16:22:19,312 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 28.35ms
2021-03-09 16:22:21,311 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 27.59ms
2021-03-09 16:17:13,061 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-09 16:17:13,072 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-09 16:17:13,073 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-09 16:17:22,709 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-09 16:17:25,424 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:17:27,739 - octoprint.util.pip - INFO - Version of pip is 20.3.4
2021-03-09 16:17:27,744 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:17:27,748 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:17:27,886 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-09 16:17:27,887 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-09 16:17:27,948 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-09 16:17:31,656 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-09 16:17:31,745 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-09 16:17:31,749 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:17:31,755 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:17:31,769 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-09 16:17:31,778 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:17:32,544 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-09 16:17:33,378 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-09 16:17:33,399 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-09 16:17:33,713 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-09 16:17:33,727 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-09 16:17:33,727 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1615307853873 (192.168.1.103) 34.02ms
2021-03-09 16:17:34,652 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:17:34,710 - tornado.access - WARNING - 404 GET /cached.gif?_=1615307855200 (192.168.1.103) 531.78ms
2021-03-09 16:17:36,459 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:17:36,500 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:17:36,689 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:17:36,860 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.8GB. That is considered sufficient for updating.
2021-03-09 16:17:36,920 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 16:17:37,420 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-09 16:37:41,429 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 16:37:42,893 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-03-09 16:37:46,029 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 16:37:46,125 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 16:37:47,025 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-09 16:37:52,605 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27}
2021-03-09 16:37:59,981 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,psucontrol:0.1.9,eeprom_marlin_printrbot:0.1.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:38:05,868 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:39:13,784 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 38.30ms
2021-03-09 16:39:30,329 - tornado.access - WARNING - 400 POST /api/plugin/appkeys (192.168.1.103) 43.66ms
2021-03-09 16:39:37,789 - tornado.access - WARNING - 400 POST /api/plugin/appkeys (192.168.1.103) 55.80ms
2021-03-09 16:39:38,460 - tornado.access - WARNING - 400 POST /api/plugin/appkeys (192.168.1.103) 45.18ms
2021-03-09 16:40:08,978 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 37.50ms
2021-03-09 16:40:16,442 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 37.70ms
2021-03-09 16:40:30,668 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.7GB. That is considered sufficient for updating.
2021-03-09 16:40:33,311 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 16:40:43,372 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:40:43,377 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:40:43,378 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:40:43,733 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-03-09 16:40:47,297 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 3358.34ms
2021-03-09 16:39:27,349 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2021-03-09 16:39:27,357 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working
2021-03-09 16:39:27,358 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2021-03-09 16:39:37,403 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-03-09 16:39:40,282 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:39:42,649 - octoprint.util.pip - INFO - Version of pip is 20.3.4
2021-03-09 16:39:42,654 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:39:42,656 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:39:42,813 - octoprint.plugins.psucontrol - INFO - Using G-Code Commands for On/Off
2021-03-09 16:39:42,814 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-03-09 16:39:42,875 - octoprint.plugins.pi_support - WARNING - This Raspberry Pi is reporting problems that might lead to bad performance or errors caused by overheating or insufficient power.
!!! UNDERVOLTAGE REPORTED !!! Make sure that the power supply and power cable are capable of supplying enough voltage and current to your Pi.
2021-03-09 16:39:46,928 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-09 16:39:47,012 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2021-03-09 16:39:47,015 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:39:47,020 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2021-03-09 16:39:47,036 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2021-03-09 16:39:47,049 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:39:47,787 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2021-03-09 16:39:48,618 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2021-03-09 16:39:48,631 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2021-03-09 16:39:48,770 - tornado.access - WARNING - 409 GET /api/printer (192.168.1.103) 57.90ms
2021-03-09 16:39:49,012 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-03-09 16:39:49,191 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-09 16:39:49,614 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-03-09 16:39:51,787 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2021-03-09 16:39:51,793 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2021-03-09 16:39:51,794 - octoprint.util.pip - INFO - ==> pip ok -> yes
2021-03-09 16:39:52,604 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 10.8GB. That is considered sufficient for updating.
2021-03-09 16:39:52,823 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2021-03-09 16:39:52,863 - octoprint.plugins.tracking - INFO - Sent tracking event system_throttled, payload: {u'throttled_mask': 327685, u'throttled_voltage_now': True, u'throttled_voltage_past': True, u'throttled_overheat_now': False, u'throttled_now': True, u'throttled_past': True, u'throttled_overheat_past': False}
2021-03-09 16:44:30,295 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin TH3D U1.R2.B5"
2021-03-09 16:44:32,636 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2021-03-09 16:44:35,536 - octoprint.plugins.softwareupdate - WARNING - Software update hook systemcommandeditor provides check for itself but that was already registered by eeprom_marlin_printrbot - overwriting that third party registration now!
2021-03-09 16:44:35,685 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2021-03-09 16:44:36,341 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': None, u'firmware_name': u'Marlin TH3D U1.R2.B5'}
2021-03-09 16:44:43,593 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 28}
2021-03-09 16:44:50,442 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:44:56,781 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 917016576, u'octopi_version': u'0.16.0', u'version': u'1.5.0', u'plugins': u'bedlevelvisualizer:1.0.0,systemcommandeditor:0.3.4,psucontrol:0.1.9,eeprom_marlin_printrbot:0.1.0', u'pip': '20.3.4', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32}
2021-03-09 16:45:57,291 - tornado.access - WARNING - 409 POST /plugin/softwareupdate/update (192.168.1.103) 36.48ms