2025-09-28 21:38:56,592 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2025-09-28 21:41:48,079 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2025-09-28 21:46:59,718 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2025-09-28 21:48:13,687 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2025-09-28 21:49:13,443 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2025-09-28 21:50:39,599 - Enabling serial logging 2025-09-28 21:50:40,575 - Recv: wait 2025-09-28 21:50:41,576 - Recv: wait 2025-09-28 21:50:42,577 - Recv: wait 2025-09-28 21:50:50,568 - Send: M105 2025-09-28 21:50:50,575 - Recv: ok 2 2025-09-28 21:50:50,577 - Recv: T:200.00 /200 B:70.04 /70 B@:0 @:176 2025-09-28 21:50:51,574 - Recv: wait 2025-09-28 21:50:52,575 - Recv: wait 2025-09-28 21:50:53,576 - Recv: wait 2025-09-28 21:50:54,577 - Recv: wait 2025-09-28 21:50:55,578 - Recv: wait 2025-09-28 21:50:56,579 - Recv: wait 2025-09-28 21:51:04,571 - Send: M105 2025-09-28 21:51:04,576 - Recv: ok 2 2025-09-28 21:51:04,578 - Recv: T:199.88 /200 B:70.00 /70 B@:0 @:170 2025-09-28 21:51:05,577 - Recv: wait 2025-09-28 21:51:06,577 - Recv: wait 2025-09-28 21:51:07,578 - Recv: wait 2025-09-28 21:51:08,580 - Recv: wait 2025-09-28 21:51:09,580 - Recv: wait 2025-09-28 21:51:10,581 - Recv: wait 2025-09-28 21:51:18,573 - Send: M105 2025-09-28 21:51:18,578 - Recv: ok 2 2025-09-28 21:51:18,582 - Recv: T:200.00 /200 B:70.00 /70 B@:0 @:108 2025-09-28 21:51:19,579 - Recv: wait 2025-09-28 21:51:20,579 - Recv: wait 2025-09-28 21:51:21,581 - Recv: wait 2025-09-28 21:51:22,581 - Recv: wait 2025-09-28 21:51:23,583 - Recv: wait 2025-09-28 21:51:24,583 - Recv: wait 2025-09-28 21:51:32,575 - Send: M105 2025-09-28 21:51:32,582 - Recv: ok 2 2025-09-28 21:51:32,585 - Recv: T:199.76 /200 B:70.04 /70 B@:0 @:144 2025-09-28 21:51:33,582 - Recv: wait 2025-09-28 21:51:34,583 - Recv: wait 2025-09-28 21:51:35,585 - Recv: wait 2025-09-28 21:51:36,585 - Recv: wait 2025-09-28 21:51:37,587 - Recv: wait 2025-09-28 21:51:38,587 - Recv: wait 2025-09-28 21:51:46,577 - Send: M105 2025-09-28 21:51:46,583 - Recv: ok 2 2025-09-28 21:51:46,586 - Recv: T:199.88 /200 B:70.04 /70 B@:0 @:174 2025-09-28 21:51:47,584 - Recv: wait 2025-09-28 21:51:48,584 - Recv: wait 2025-09-28 21:51:49,586 - Recv: wait 2025-09-28 21:51:50,587 - Recv: wait 2025-09-28 21:51:51,588 - Recv: wait 2025-09-28 21:51:52,589 - Recv: wait 2025-09-28 21:52:00,580 - Send: M105 2025-09-28 21:52:00,587 - Recv: ok 2 2025-09-28 21:52:00,589 - Recv: T:200.00 /200 B:69.96 /70 B@:255 @:138 2025-09-28 21:52:01,586 - Recv: wait 2025-09-28 21:52:02,587 - Recv: wait 2025-09-28 21:52:03,588 - Recv: wait 2025-09-28 21:52:04,589 - Recv: wait 2025-09-28 21:52:05,490 - Changing monitoring state from "Operational" to "Starting" 2025-09-28 21:52:05,537 - Send: N0 M110 N0*125 2025-09-28 21:52:05,545 - Recv: ok 2025-09-28 21:52:05,546 - Changing monitoring state from "Starting" to "Printing" 2025-09-28 21:52:05,551 - Send: N1 G21*27 2025-09-28 21:52:05,555 - Recv: ok 1 2025-09-28 21:52:05,557 - Send: N2 G90*18 2025-09-28 21:52:05,566 - Recv: ok 2 2025-09-28 21:52:05,568 - Send: N3 M82*26 2025-09-28 21:52:05,589 - Recv: ok 3 2025-09-28 21:52:05,616 - Send: N4 M107 T0*101 2025-09-28 21:52:05,661 - Recv: ok 4 2025-09-28 21:52:05,699 - Send: N5 M190 S70*90 2025-09-28 21:52:05,749 - Recv: ok 5 2025-09-28 21:52:05,756 - Send: N6 M109 S200 T0*40 2025-09-28 21:52:05,797 - Recv: ok 6 2025-09-28 21:52:05,798 - Recv: TargetExtr0:200 2025-09-28 21:52:05,799 - Send: N7 G28*20 2025-09-28 21:52:05,841 - Recv: ok 7 2025-09-28 21:52:05,842 - Recv: busy:processing 2025-09-28 21:52:05,843 - Send: N8 G92 E0*79 2025-09-28 21:52:06,298 - Recv: SelectExtruder:0 2025-09-28 21:52:06,300 - Recv: FlowMultiply:100 2025-09-28 21:52:06,304 - Recv: X:0.00 Y:0.00 Z:374.010 E:0.0000 2025-09-28 21:52:06,305 - Recv: ok 8 2025-09-28 21:52:06,308 - Send: N9 G0 E3 F200*34 2025-09-28 21:52:06,314 - Recv: ok 9 2025-09-28 21:52:06,315 - Send: N10 G92 E0*118 2025-09-28 21:52:06,319 - Recv: ok 10 2025-09-28 21:52:06,320 - Send: N11 M82*41 2025-09-28 21:52:06,326 - Recv: ok 11 2025-09-28 21:52:06,327 - Send: N12 G92 E0*116 2025-09-28 21:52:06,332 - Recv: ok 12 2025-09-28 21:52:06,332 - Send: N13 G92 E0*117 2025-09-28 21:52:06,337 - Recv: ok 13 2025-09-28 21:52:06,338 - Send: N14 G1 F1500 E-6.5*26 2025-09-28 21:52:06,344 - Recv: ok 14 2025-09-28 21:52:06,345 - Send: N15 M107*17 2025-09-28 21:52:06,349 - Recv: ok 15 2025-09-28 21:52:06,350 - Send: N16 G0 F423.5 X-1.666 Y20.956 Z0.3*18 2025-09-28 21:52:06,358 - Recv: ok 16 2025-09-28 21:52:06,359 - Send: N17 G1 F1500 E0*41 2025-09-28 21:52:12,366 - Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:12,372 - Send: N18 M105*30 2025-09-28 21:52:18,375 - Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:18,380 - Send: N19 M105*31 2025-09-28 21:52:24,383 - Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:24,389 - Send: N20 M105*21 2025-09-28 21:52:30,391 - Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:30,397 - Send: N21 M105*20 2025-09-28 21:52:36,400 - Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:36,402 - Send: N22 M105*23 2025-09-28 21:52:42,409 - No response from printer after 6 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2025-09-28 21:52:42,516 - Changing monitoring state from "Printing" to "Offline after error" 2025-09-28 21:52:42,525 - Connection closed, closing down monitor 2025-09-28 21:52:48,355 - Changing monitoring state from "Offline" to "Opening serial connection" 2025-09-28 21:52:48,370 - Connecting to port /dev/ttyUSB0, baudrate 115200 2025-09-28 21:52:48,417 - Changing monitoring state from "Opening serial connection" to "Connecting" 2025-09-28 21:52:48,419 - Connected to: Serial(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor 2025-09-28 21:52:48,431 - Send: N0 M110 N0*125 2025-09-28 21:52:52,326 - Recv: ok 17 2025-09-28 21:52:52,332 - Send: N0 M110 N0*125 2025-09-28 21:52:52,342 - Changing monitoring state from "Connecting" to "Operational" 2025-09-28 21:52:52,608 - Recv: ok 18 2025-09-28 21:52:52,611 - Send: N0 M110 N0*125 2025-09-28 21:52:52,612 - Recv: T:200.00 /200 B:70.04 /70 B@:0 @:108 2025-09-28 21:52:52,615 - Recv: ok 19 2025-09-28 21:52:52,616 - Send: N1 M115*39 2025-09-28 21:52:52,617 - Recv: T:200.00 /200 B:70.04 /70 B@:0 @:108 2025-09-28 21:52:52,619 - Recv: ok 20 2025-09-28 21:52:52,621 - Send: N2 M21*18 2025-09-28 21:52:52,622 - Recv: T:200.00 /200 B:70.04 /70 B@:0 @:108 2025-09-28 21:52:52,624 - Recv: ok 21 2025-09-28 21:52:52,626 - Recv: T:200.00 /200 B:70.04 /70 B@:0 @:108 2025-09-28 21:52:52,628 - Recv: ok 22 2025-09-28 21:52:52,635 - Recv: T:199.88 /200 B:70.04 /70 B@:0 @:173 2025-09-28 21:52:52,637 - Recv: ok 2025-09-28 21:52:52,639 - Recv: ok 2025-09-28 21:52:52,641 - Recv: ok 2025-09-28 21:52:52,642 - Recv: ok 1 2025-09-28 21:52:52,644 - Recv: FIRMWARE_NAME:Robin 2025-09-28 21:52:52,651 - Recv: Printed filament:0.01m Printing time:0 days 0 hours 7 min 2025-09-28 21:52:52,660 - Recv: PrinterMode:FFF 2025-09-28 21:52:52,661 - Recv: ok 2 2025-09-28 21:52:53,139 - Send: G91 2025-09-28 21:52:53,144 - Recv: ok 2 2025-09-28 21:52:53,146 - Send: G28 Z0 2025-09-28 21:52:53,153 - Recv: ok 2 2025-09-28 21:52:53,154 - Recv: busy:processing 2025-09-28 21:52:53,155 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2025-09-28 21:52:53,157 - Send: G90 2025-09-28 21:52:55,153 - Recv: busy:processing 2025-09-28 21:52:57,153 - Recv: busy:processing 2025-09-28 21:52:59,153 - Recv: busy:processing 2025-09-28 21:53:01,153 - Recv: busy:processing 2025-09-28 21:53:03,153 - Recv: busy:processing 2025-09-28 21:53:05,153 - Recv: busy:processing 2025-09-28 21:53:06,678 - Recv: SelectExtruder:0 2025-09-28 21:53:06,684 - Recv: FlowMultiply:100 2025-09-28 21:53:06,688 - Recv: X:0.00 Y:0.00 Z:374.010 E:0.0000 2025-09-28 21:53:06,691 - Recv: ok 2 2025-09-28 21:53:06,702 - Send: M113 S2 2025-09-28 21:53:06,711 - Recv: ok 2 2025-09-28 21:53:06,714 - Recv: Unknown command:M113 S2 2025-09-28 21:53:06,717 - Send: G91 2025-09-28 21:53:06,724 - Recv: ok 2 2025-09-28 21:53:06,728 - Send: G28 X0 Y0 2025-09-28 21:53:06,734 - Recv: ok 2 2025-09-28 21:53:06,737 - Send: G90 2025-09-28 21:53:07,153 - Recv: busy:processing 2025-09-28 21:53:07,327 - Recv: SelectExtruder:0 2025-09-28 21:53:07,330 - Recv: FlowMultiply:100 2025-09-28 21:53:07,334 - Recv: X:0.00 Y:0.00 Z:374.010 E:0.0000 2025-09-28 21:53:07,337 - Recv: ok 2 2025-09-28 21:53:07,347 - Send: G91 2025-09-28 21:53:07,354 - Recv: ok 2 2025-09-28 21:53:07,357 - Send: G28 Z0 2025-09-28 21:53:07,362 - Recv: ok 2 2025-09-28 21:53:07,366 - Send: G90 2025-09-28 21:53:07,977 - Recv: SelectExtruder:0 2025-09-28 21:53:07,981 - Recv: FlowMultiply:100 2025-09-28 21:53:07,985 - Recv: X:0.00 Y:0.00 Z:374.010 E:0.0000 2025-09-28 21:53:07,990 - Recv: ok 2 2025-09-28 21:53:07,997 - Send: G91 2025-09-28 21:53:08,001 - Recv: ok 2 2025-09-28 21:53:08,005 - Send: G28 X0 Y0 2025-09-28 21:53:08,010 - Recv: ok 2 2025-09-28 21:53:08,014 - Send: G90 2025-09-28 21:53:08,628 - Recv: SelectExtruder:0 2025-09-28 21:53:08,633 - Recv: FlowMultiply:100 2025-09-28 21:53:08,637 - Recv: X:0.00 Y:0.00 Z:374.010 E:0.0000 2025-09-28 21:53:08,640 - Recv: ok 2 2025-09-28 21:53:08,646 - Send: M105 2025-09-28 21:53:08,652 - Recv: ok 2 2025-09-28 21:53:08,655 - Recv: T:199.88 /200 B:70.00 /70 B@:0 @:80 2025-09-28 21:53:09,652 - Recv: wait 2025-09-28 21:53:10,653 - Recv: wait 2025-09-28 21:53:11,654 - Recv: wait 2025-09-28 21:53:12,655 - Recv: wait 2025-09-28 21:53:13,656 - Recv: wait 2025-09-28 21:53:14,702 - Recv: wait 2025-09-28 21:53:19,342 - Send: M105 2025-09-28 21:53:19,348 - Recv: ok 2 2025-09-28 21:53:19,353 - Recv: T:200.29 /200 B:70.12 /70 B@:0 @:55 2025-09-28 21:53:20,348 - Recv: wait 2025-09-28 21:53:21,349 - Recv: wait 2025-09-28 21:53:22,350 - Recv: wait 2025-09-28 21:53:23,351 - Recv: wait 2025-09-28 21:53:24,353 - Recv: wait 2025-09-28 21:53:25,353 - Recv: wait 2025-09-28 21:53:27,641 - Disabling serial logging