i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 1920x1080 -f 24 -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:02:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 1920x1080 -f 24 -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:02:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:02:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed /root/bin/webcamd: line 103: kill: (2372) - No such process Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:02:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:03:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -d /dev/v41/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: (null) i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:03:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 29 01:04:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 29 01:05:21 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_raspicam.so -fps 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 10 i: resolution........: 640 x 480 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera Encoder Buffer Size 81920 Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:06:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:06:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... ls: cannot access '/boot/octopi.conf.d/*.txt': No such file or directory --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:07:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:19:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:19:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:20:39 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:20:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -y MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: -1 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1448695129 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:21:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:21:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -y MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1448695129 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:22:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:22:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -p 8081 -i input_uvc.so -r 640x480 -f 10 -y MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1448695129 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 -y raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:22:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 29 01:22:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -p 8081 -i input_uvc.so -r 640x480 -f 10 -y MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1448695129 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:23:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 29 01:23:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -p 8081 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www-octopi -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/video0 raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:28:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/video0 raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:30:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/video0 raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:37:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':Video device already in use. Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -d /dev/video0 -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/video0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/video0 raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/video0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 29 01:41:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 1920x1080 -f 24 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':Video device already in use. Done bring up all configured video device Goodbye... pi@octopi:/boot $