What is the problem?
Octopi cannot connect to the printer
What did you already try to solve it?
WRITE HERE
Have you tried running in safe mode?
no
Did running in safe mode solve the problem?
??
Complete Logs
messages:
Dec 18 14:15:58 octopi MJPG-streamer [817]: starting application
Dec 18 14:15:58 octopi MJPG-streamer [817]: MJPG Streamer Version: git rev: 501f6362c5afddcfb41055f97ae484252c85c912
Dec 18 14:15:58 octopi MJPG-streamer [817]: Using V4L2 device.: /dev/video10
Dec 18 14:15:58 octopi MJPG-streamer [817]: Desired Resolution: 640 x 480
Dec 18 14:15:58 octopi MJPG-streamer [817]: Frames Per Second.: 10
Dec 18 14:15:58 octopi MJPG-streamer [817]: Format............: JPEG
Dec 18 14:15:58 octopi MJPG-streamer [817]: TV-Norm...........: DEFAULT
Dec 18 14:15:58 octopi MJPG-streamer [817]: init_VideoIn failed
Dec 18 15:44:44 octopi kernel: [ 1224.641433] printk: systemd: 33 output lines suppressed due to ratelimiting
Dec 18 15:48:11 octopi kernel: [ 1430.758626] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
Dec 18 15:55:53 octopi kernel: [ 1893.338881] usb 1-1.2: USB disconnect, device number 4
Dec 18 15:55:58 octopi kernel: [ 1897.730144] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
Dec 18 15:55:58 octopi kernel: [ 1897.877220] usb 1-1.3: New USB device found, idVendor=2c99, idProduct=0002, bcdDevice= 1.30
Dec 18 15:55:58 octopi kernel: [ 1897.877254] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 18 15:55:58 octopi kernel: [ 1897.877275] usb 1-1.3: Product: Original Prusa i3 MK3
Dec 18 15:55:58 octopi kernel: [ 1897.877294] usb 1-1.3: Manufacturer: Prusa Research (prusa3d.com)
Dec 18 15:55:58 octopi kernel: [ 1897.877314] usb 1-1.3: SerialNumber: CZPX3720X004XK16148
Dec 18 15:55:58 octopi kernel: [ 1897.895542] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
Dec 18 15:55:58 octopi mtp-probe: checking bus 1, device 5: "/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3"
Dec 18 15:55:58 octopi mtp-probe: bus: 1, device: 5 was not an MTP device
Dec 18 15:55:58 octopi mtp-probe: checking bus 1, device 5: "/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.3"
Dec 18 15:55:58 octopi mtp-probe: bus: 1, device: 5 was not an MTP device
<small>`octoprint.log`, `serial.log` or output on terminal tab *at a minimum*, browser error console if UI issue ... **no logs, no support!** Not log excerpts, *complete* logs.)</small>
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
Trying port /dev/ttyACM0, baudrate 115200
Connecting to port /dev/ttyACM0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xac0fd050, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: Command not found!
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
Trying port /dev/ttyACM0, baudrate 115200
Connecting to port /dev/ttyACM0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xa82064f0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
Trying port /dev/ttyACM0, baudrate 115200
Connecting to port /dev/ttyACM0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xb2d44ef0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
Trying port /dev/ttyACM0, baudrate 115200
Connecting to port /dev/ttyACM0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xafb1eb90, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Recv: Ý\x89J\x88\x13\x8b\x00¹\x10\x9dB\x08+!\x00\x00\x11\x01\x83µÅ¸ØÖ\x9b½n\x9b×qS\x00\x80ù\x9b¨
Send: N0 M110 N0*125
WARNThe received line contains at least one null byte character at position 6, this hints at some data corruption going on
Recv: ±Í\x83\x012Fhù
Trying port /dev/ttyACM0, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
Trying port /dev/ttyACM0, baudrate 115200
Connecting to port /dev/ttyACM0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xb2d3f810, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port /dev/ttyACM0, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
### Additional information about your setup
<small>OctoPrint version, OctoPi version, printer, firmware, browser, operating system, ... **as much data as possible**</small>
browser.user_agent: Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.88 Safari/537.36
connectivity.connection_check: 1.1.1.1:53
connectivity.connection_ok: true
connectivity.enabled: true
connectivity.online: true
connectivity.resolution_check: octoprint.org
connectivity.resolution_ok: true
env.hardware.cores: 1
env.hardware.freq: 700
env.hardware.ram: 386256896
env.os.bits: 32
env.os.id: linux
env.os.platform: linux2
env.plugins.pi_support.model: Raspberry Pi Model B Rev 2
env.plugins.pi_support.octopi_version: 0.17.0
env.plugins.pi_support.throttle_state: 0x0
env.python.pip: 19.3.1
env.python.version: 2.7.16
env.python.virtualenv: true
octoprint.safe_mode: false
octoprint.version: 1.5.2