Get Help
Electronics Need assistance getting some kind of electronics to run, like specific addon hardware such as displays, or just GPIO pins? Post here. Include all available information about what you are trying to run how and what specifically doesn't work. Guides The right place to share guides and tutorials with the community. Slicers Slicer troubles? Post here. Make sure to include all relevant information such as used slicer & version and also provide some sample GCODE files. Networking Trouble getting OctoPi to connect to your network, or connecting to it from your clients? Post here. Make sure to include all available information about your network layout and hardware. Docker This is the place to get help with using the official octoprint/octoprint docker image. The usage docs can be found at https://github.com/OctoPrint/octoprint-docker/blob/master/README.md. FAQ Curated list of Frequently Asked Questions Webcams Got an issue getting a webcam to work with OctoPi, or some timelapse related issues? This is the right place. Make sure to include all available information on the type of webcam you are struggling to get to work, and also include /var/log/webcamd.log from the log files.
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
After the update to 1.5.x I keep running into SerialExceptions
What is the problem? The printer just stops and this error popup: State: Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.… |
|
61 | 1264 | January 20, 2021 |
|
PSA: Please mark the solutions to your topics as such
All topics you create in this category can be marked as "Solved" by clicking the little :marksolved: icon under the post that contains the solution: [image] Please make heavy use of it. Marking a topic as solved allows… |
|
2 | 1975 | April 11, 2018 |
| Need help? READ THIS FIRST! |
|
1 | 5489 | March 8, 2018 |
| Octoprint with Logitech C905 webcam problem |
|
20 | 3043 | January 23, 2021 |
| I upgraded to 1.5.2 adn now I cannot connect to my Printer |
|
2 | 23 | January 22, 2021 |
| Update from 1.5.2 to 1.5.3 fails |
|
0 | 12 | January 22, 2021 |
| OctoPrint tells me that my printer's firmware lacks mandatory safety features, what does this mean? |
|
71 | 129858 | January 22, 2021 |
| Status blank/not updating, print buttons etc greyed out |
|
2 | 25 | January 22, 2021 |
| Raspberry 3B+ not booting after Octoprint Shutdown - just Red Light on constantly |
|
8 | 32 | January 22, 2021 |
| Raspi model V2 webcam stream not loaded |
|
3 | 46 | January 22, 2021 |
| Just updated to octopi will not pull up |
|
39 | 165 | January 22, 2021 |
| Ender 5 pro 4.2.7 not detected |
|
2 | 30 | January 22, 2021 |
| OctoPrint can't set (bed) temperature of my Printer (Ender 5 Plus) |
|
4 | 27 | January 22, 2021 |
| Problemi con stampante Anycubic predator |
|
3 | 29 | January 22, 2021 |
| Ender 3 V2 / Pi3b+ or Pi4 : lot of "unknown commmand" and UTF8 chars (Electro Magnetic Interferences) |
|
20 | 939 | January 22, 2021 |
| Octoprint with Pi 4 and Hyperpixel 4.0: Display shift |
|
5 | 496 | January 22, 2021 |
| Webcam activates LEDs? |
|
53 | 5378 | January 22, 2021 |
| Octoprint keeps crashing and leaving hot end on |
|
12 | 66 | January 22, 2021 |
| Trouble with USB connection Ender 3 Pro v2 |
|
40 | 5652 | January 22, 2021 |
| Update from 1.3.12 to 1.5.3 Fails |
|
3 | 34 | January 22, 2021 |
| Unable to detect serial port on Qidi X-Smart |
|
8 | 545 | January 22, 2021 |
| Raspberry pi usb power |
|
13 | 1020 | January 22, 2021 |
|
OctoPi WiFi/network connection troubleshooting megatopic
Got a problem getting the WiFi connection to work with your OctoPi install? First of all, read this FAQ entry that should already take care of the most common issues: If this doesn't help you, use this thread to ask … |
|
393 | 54506 | January 22, 2021 |
| Flash always fail |
|
2 | 26 | January 21, 2021 |
| Update to 1.5.3 failed |
|
1 | 47 | January 21, 2021 |
| 2 channel relay |
|
4 | 45 | January 21, 2021 |
| SSL Cert No Longer Working |
|
2 | 46 | January 21, 2021 |
| Printer stops for filament change |
|
1 | 25 | January 21, 2021 |
| Cannot unzip Octopi 0.17.0 |
|
3 | 40 | January 21, 2021 |
| Configuration (config.yaml) changed by what ever? |
|
13 | 97 | January 21, 2021 |