What is the problem?
Today i went to use my Cr10spro - i sent the print to my printer through my Octopi - which i have done many times before.
This time the printer heated up - homed and then Octoprint Cancelled the print saying that Bed leveling is not enabled.
I have the stock CR10spro sensor, but its not reliable so i do not have automatic bed leveling setup and I hand level the bed - I feel i get better results from doing that.
What did you already try to solve it?
I disconnected my octoprint and attempted to print the same file and it worked no issues and is currently printing.
I noticed the plugins were not fully up to date so i updated them tried again got the same error.
But the printer is currently printing via the SD card with my octoprint disconnected and i got no errors from the printer.
2020-06-15 06:54:23,810 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-06-15 06:54:23,818 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2020-06-15 06:54:23,819 - octoprint.server - INFO - OctoPrint 1.4.0
2020-06-15 06:54:23,825 - octoprint.plugin.core - INFO - 35 plugin(s) registered with the system:
| Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
| Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
| Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking
| Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys
| Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup
| Bed Visualizer (0.1.13) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer
| BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout
| Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
| Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
| !DisplayLayerProgress Plugin (1.20.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress
| DisplayZ (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_displayz
| EEPROM Marlin Editor Plugin (1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin
| Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking
| Extra Distance Buttons (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_extradistance
| Fan Speed Control (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_fanspeedslider
| Firmware Updater (1.7.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater
| Fullscreen Plugin (0.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_fullscreen
| ipOnConnect (0.2.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ipOnConnect
| Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
| Login UI (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/loginui
| M73 Progress Plugin (0.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress
| Malyan/Monoprice Connection Fix (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_malyan_connection_fix
| Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp
| OctoPod Plugin (0.2.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octopod
| Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support
| Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
| Preheat Button (0.5.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat
| Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check
| Simple Emergency Stop (1.0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_simpleemergencystop
| Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
| Tab Order (0.5.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_taborder
| !Telegram Notifications (1.5.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_telegram
| Terminal Commands (0.1.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_TerminalCommands
| Themeify (1.2.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify
| Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2020-06-15 06:54:23,841 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details:
| hardware:
| cores: 4
| freq: 1500.0
| ram: 1979613184
| os:
| id: linux
| platform: linux2
| plugins:
| pi_support:
| model: Raspberry Pi 4 Model B Rev 1.1
| octopi_version: 0.17.0
| python:
| pip: 19.3.1
| version: 2.7.16
| virtualenv: /home/pi/oprint
2020-06-15 06:54:23,841 - octoprint.server - INFO - ------------------------------------------------------------------------------
2020-06-15 23:35:35,118 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.90
2020-06-15 23:35:38,234 - octoprint.access.users - INFO - Cleaning up user session 40EF756FDFBF426FAE71A5405F17D450 for user _api
2020-06-15 23:35:38,235 - octoprint.access.users - INFO - Logged out user: _api
2020-06-15 23:35:38,238 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:35:38,241 - octoprint.server.api - INFO - Actively logging in user ezpi from ::ffff:192.168.1.90
2020-06-15 23:35:38,297 - octoprint.server.util.flask - INFO - Passively logging in user ezpi from ::ffff:192.168.1.90
2020-06-15 23:35:38,298 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:35:38,378 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.90
2020-06-15 23:35:40,013 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.90
2020-06-15 23:35:40,131 - octoprint.server.util.flask - INFO - Passively logging in user ezpi from ::ffff:192.168.1.90
2020-06-15 23:35:40,132 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:35:43,076 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.46s
2020-06-15 23:35:43,648 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.48s
2020-06-15 23:35:44,529 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.46s
2020-06-15 23:35:45,006 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.44s
2020-06-15 23:35:45,538 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.48s
2020-06-15 23:35:46,267 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2020-06-15 23:35:47,466 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2020-06-15 23:35:48,593 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2020-06-15 23:35:48,712 - octoprint.server.util.sockjs - INFO - User ezpi logged in on the socket from client ::ffff:192.168.1.90
2020-06-15 23:35:56,044 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2020-06-15 23:35:56,050 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting"
2020-06-15 23:35:56,056 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:35:56,952 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:35:59,939 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:35:59,944 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational"
2020-06-15 23:35:59,971 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:36:00,024 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.5_DW6.1 TM3D SSMDNB"
2020-06-15 23:36:00,037 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2020-06-15 23:36:00,056 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2020-06-15 23:36:00,060 - octoprint.util.comm - INFO - Firmware states that it supports sd status autoreporting
2020-06-15 23:36:00,327 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2020-06-15 23:36:00,329 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2020-06-15 23:36:00,786 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': u'/dev/ttyUSB0', 'firmware_name': u'Marlin 2.0.5_DW6.1 TM3D SSMDNB'}
2020-06-15 23:36:02,606 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2020-06-15 23:36:02,630 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2020-06-15 23:36:02,637 - octoprint.util.comm - INFO - Firmware states that it supports sd status autoreporting
2020-06-15 23:36:09,508 - octoprint.filemanager.analysis - INFO - Starting analysis of local:drone.gcode
2020-06-15 23:36:09,515 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python2 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/drone.gcode
2020-06-15 23:36:20,853 - octoprint.filemanager.analysis - INFO - Analysis of entry local:drone.gcode finished, needed 11.35s
2020-06-15 23:36:22,676 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: drone.gcode, owner: ezpi, user: ezpi
2020-06-15 23:36:22,691 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-06-15 23:36:22,707 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: drone.gcode, owner: ezpi, user: ezpi
2020-06-15 23:36:22,794 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:36:23,242 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9'}
2020-06-15 23:36:24,841 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2020-06-15 23:36:30,335 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: 192.168.1.162
2020-06-15 23:36:49,786 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2020-06-15 23:36:49,804 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-06-15 23:36:50,601 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.136
2020-06-15 23:36:50,906 - octoprint.server.util.flask - INFO - Passively logging in user _api from ::ffff:192.168.1.136
2020-06-15 23:36:50,908 - octoprint.access.users - INFO - Logged in user: _api
2020-06-15 23:36:50,923 - octoprint.server.util.sockjs - INFO - User _api logged in on the socket from client ::ffff:192.168.1.136
2020-06-15 23:38:29,399 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.136
2020-06-15 23:39:24,007 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-06-15 23:39:29,750 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1701937}
2020-06-15 23:41:02,779 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling
| Last lines in terminal:
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.07 /200.00 B:50.01 /50.00 @:65 B@:18
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.00 /200.00 B:50.00 /50.00 @:65 B@:24
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.49 /200.00 B:50.00 /50.00 @:53 B@:24
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: X:177.00 Y:150.00 Z:5.00 E:0.00 Count X:14160 Y:12000 Z:2000
| Recv: ok N18 P7 B0
| Send: N22 G1 X10.1 Y20 Z0.28 F5000.0*22
| Recv: echo:Invalid mesh.
| Recv: Error:Failed to enable Bed Leveling
2020-06-15 23:41:02,784 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-06-15 23:41:02,793 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-06-15 23:41:02,795 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-06-15 23:41:02,816 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: drone.gcode, owner: ezpi, user: None
2020-06-15 23:41:03,343 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9', u'elapsed': 280}
2020-06-15 23:41:03,769 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9', u'elapsed': 280}
2020-06-15 23:41:05,916 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-06-15 23:41:09,460 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.136
2020-06-15 23:41:09,588 - octoprint.server.util.flask - INFO - Passively logging in user _api from ::ffff:192.168.1.136
2020-06-15 23:41:09,590 - octoprint.access.users - INFO - Logged in user: _api
2020-06-15 23:41:09,601 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.136
2020-06-15 23:41:50,251 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.90
2020-06-15 23:53:42,692 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.136
2020-06-15 23:53:57,593 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:53:57,596 - octoprint.server.api - INFO - Actively logging in user ezpi from ::ffff:192.168.1.136
2020-06-15 23:53:57,647 - octoprint.server.util.flask - INFO - Passively logging in user ezpi from ::ffff:192.168.1.136
2020-06-15 23:53:57,648 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:53:57,713 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.136
2020-06-15 23:53:59,048 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.136
2020-06-15 23:53:59,162 - octoprint.server.util.flask - INFO - Passively logging in user ezpi from ::ffff:192.168.1.136
2020-06-15 23:53:59,163 - octoprint.access.users - INFO - Logged in user: ezpi
2020-06-15 23:54:00,583 - octoprint.server.util.sockjs - INFO - User ezpi logged in on the socket from client ::ffff:192.168.1.136
2020-06-15 23:54:03,824 - octoprint.util.comm - INFO - Force-sending M876 to the printer
2020-06-15 23:54:09,123 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-06-15 23:54:09,140 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: drone.gcode, owner: ezpi, user: ezpi
2020-06-15 23:54:09,224 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-06-15 23:54:09,666 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9'}
2020-06-15 23:54:24,008 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-06-15 23:54:24,851 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-06-15 23:54:29,756 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1702837}
2020-06-15 23:56:39,544 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling
| Last lines in terminal:
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.21 /200.00 B:50.01 /50.00 @:62 B@:19
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.00 /200.00 B:50.00 /50.00 @:65 B@:25
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: T:200.00 /200.00 B:50.00 /50.00 @:64 B@:25
| Recv: Not SD printing
| Recv: echo:busy: processing
| Recv: Not SD printing
| Recv: X:177.00 Y:150.00 Z:5.00 E:0.00 Count X:14160 Y:12000 Z:2000
| Recv: ok N17 P7 B1
| Send: N20 G1 Z2.0 F3000*41
| Recv: echo:Invalid mesh.
| Recv: Error:Failed to enable Bed Leveling
2020-06-15 23:56:39,550 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-06-15 23:56:39,556 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-06-15 23:56:39,566 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-06-15 23:56:39,585 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: drone.gcode, owner: ezpi, user: None
2020-06-15 23:56:40,159 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9', u'elapsed': 150}
2020-06-15 23:56:40,498 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.136
2020-06-15 23:56:40,599 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'c55588f221ef125d71f2329e884e2bb7b9483fb9', u'elapsed': 150}
2020-06-15 23:56:42,754 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-06-15 23:56:44,500 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.136
Octoprint Version 1.4.0
Octopi Version 0.17.0, running on Raspberry Pi 4 Model B Rev 1.1
running off a Macbook pro with Catalina. I have had no issues running my printer off this octoprint prior to today.