.8mm nozzle profile for cura

I am using Cura 4.8, CR10S-Pro with Hemera direct drive/hotend and .8mm nozzle

Does anyone have a profile for Cura that would produce nice prints with a .8mm nozzle?
I use Chep profiles on my SV01 and MK3s and .4mm nozzles with great results but with the .8mm it just does not look so good.. mainly the outter walls, they don't look uniform. I understand the layer height will be bigger with the .8mm nozzle but that is not the issue. Suggestions? Thanks!

If you don't get an answer here I would recommend you ask on the cura forums :slight_smile: