What is the problem?
The camera does not work. I would like to know if it is possible to fix it or if it is incompatible:
pi@octopi:~ $ lsusb
**Bus 001 Device 004: ID 093a:2620 Pixart Imaging, Inc.**
Bus 001 Device 005: ID 2a03:003d dog hunter AG Arduino Due (usb2serial)
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
What did you already try to solve it?
I tried to change the values of the file /boot/octopi.tx inserting a similar video camera:
camera_usb_options="-r 800x600 -f 30 -y"
- LogiLink WebCam (Microdia Sonix USB 2.0 Camera) 0c45:62c0
-r 320x240 -f 5 -y
but it don't work.
The camera I have is this: link
Additional information about your setup (OctoPrint version, OctoPi version, printer, firmware, octoprint.log
, serial.log
or output on terminal tab, ...)
My setup: OctoPrint 1.3.10 running on OctoPi 0.15.1 - Custom Delta printer, fw MK4duo 4.3.7
webcamd.log (1.5 MB)
octoprint.log (397.3 KB)
serial.log (444 Bytes)
Thanks in advance and sorry for my english