What is the problem?
I am unable to connect to a CR-30 with Octoprint 4 Android using a Nuu Mobile R1.
What did you already try to solve it?
Confirmed that the phone can OTG and charge using a flash drive and Y-cable and tried it with just the phone connected to the printer.
Have you tried running in safe mode?
Yes.
Did running in safe mode solve the problem?
No.
Systeminfo Bundle
You can download this in OctoPrint's System Information dialog ... no bundle, no support!)
octoprint-systeminfo-20220610234732.zip (28.7 KB)
WRITE HERE
Additional information about your setup
OctoPrint version, OctoPi version, printer, firmware, browser, operating system, ... as much data as possible
Log: Connected to: Serial<id=0xa8785b68, open=True>(port='/dev/ttyOcto4a', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0125
Trying port /dev/ttyOcto4a, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error"
Changing monitoring state from "Error" to "Offline after error"