Didnt get Eye Toy Camera to Work


i got an old PS2 Eyetoy Camera laying arround and was thinking of it to use as Webcam for my Printer. on this site: https://github.com/foosel/OctoPrint/wiki/Webcams-known-to-work

it says that should working fine. I edited the /boot/octopi.txt equal to the Settings that were told on the Site:

camera_usb_options="-r 640x480 -f 10 -y"

but cant reach the Cam from my Octoprint Interface.

this is my lsusb output:

pi@octopi:~ $ lsusb
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 001 Device 007: ID 054c:0155 Sony Corp. Eyetoy Video Device
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

in which the Eye Toy cam is definitely detected. The Webcam URLS in my Octoprint UI are default.

I am using the Octopi Image.

I am thankful for any help you can provide.


Is this the only camera or is the pi cam also connected?