Problem: Larger Print Jobs are cut off on the X and Y
-
X axis prints up to ~158.75 mm
-
Y access prints up to ~120.7 mm
-
This is origin being lower left of the bed.
-
Checked Slicer (Cura) for bed dimensions
-
Check Octoprint Printer Profile Bed Dimensions
-
Check that Slicer (Cura) Origin at Center is not selected
OctoPi: Version 1.3.10
Raspberry Pi 2 Model B
Printer: Ender 3 Pro
Firmware: Marlin TH3D U1.R2.7