The problem is the Octoprint service will note start.
Per the steps on the web page that told me the service was not running I also checked the logs and I see;
2018-11-20 16:38:36,557 - octoprint.startup - INFO - ******************************************************************************
2018-11-20 16:38:36,559 - octoprint.startup - INFO - Starting OctoPrint 1.3.9
2018-11-20 16:38:36,649 - octoprint.startup - INFO - ******************************************************************************
2018-11-20 16:38:37,115 - octoprint.startup - CRITICAL - Could not initialize event manager: No module named bdist
2018-11-20 16:38:37,117 - octoprint.startup - CRITICAL - There was a fatal error starting up OctoPrint.
2018-11-20 16:47:15,057 - octoprint.startup - INFO - ******************************************************************************
2018-11-20 16:47:15,059 - octoprint.startup - INFO - Starting OctoPrint 1.3.9
2018-11-20 16:47:15,060 - octoprint.startup - INFO - ******************************************************************************
2018-11-20 16:47:15,071 - octoprint.startup - CRITICAL - Could not initialize event manager: No module named bdist
2018-11-20 16:47:15,072 - octoprint.startup - CRITICAL - There was a fatal error starting up OctoPrint.
I printed a few hour print this morning and all was ok. Had my wife turn off the printer after it was done. The printer power also runs through a 5v regulator to power the pi. Got home from work and OctoPrint won't start. For now I will by pass the 4 relay setup I have to remotely control the power and just print from the SD card.
Thanks for any help. I am fairly good in Linux if your help needs me to do something. I can SSH into the Pi.
Jeff