What is the problem?
when i press extrude Unable to extrude same retract too i cant
What did you already try to solve it?
i checked the logs but it says G90 then OK no error and the Nozzle temp is at 200
Recv: T:199.95 /200.00 B:60.00 /60.00 @:32 B@:16
Send: G91
Recv: ok
Send: G1 E5 F100
Recv: ok
Send: G90
Recv: ok
Recv: T:200.00 /200.00 B:60.05 /60.00 @:31 B@:6
Recv: T:200.00 /200.00 B:60.00 /60.00 @:32 B@:20
Recv: T:200.05 /200.00 B:60.00 /60.00 @:27 B@:31
and i try retract
nothing happen but the log
Recv: T:200.00 /200.00 B:60.00 /60.00 @:31 B@:33
Send: G91
Recv: ok
Send: G1 E-5 F100
Recv: ok
Send: G90
Recv: ok
Recv: T:199.95 /200.00 B:60.05 /60.00 @:35 B@:19
Recv: T:199.90 /200.00 B:60.09 /60.00 @:34 B@:3
Recv: T:199.90 /200.00 B:60.00 /60.00 @:32 B@
Additional information about your setup (OctoPrint version, OctoPi version, printer, firmware, what kind of hardware precisely, ...)