Octopi.local wont load- not a wifi issue (good connectivity)

What is the problem?

Octoprint was working flawlessly until an update. Updated over octopi.local, had a successful update and restart. Went ahead and updated bed visualize. had a successful update, but would not restart.
I have been trying to connect to the pi via octopi.local and the IP address with no connectivity (no error messages, just an eternal loading screen)

What did you already try to solve it?

I restarted the pi and printer, no luck.
I ssh into the pi from my MAC. connected with no issues
I ping'd the IP address on the wifi showed all signs of good connectivity.
I checked out the supplicant file and everything was normal.

Logs (syslog, dmesg, ... no logs, no support)
I am not sure what kind of logs would be helpful for this
Additional information about your network (Hardware you are trying to connect to, hardware you are trying to connect from, router, access point, used operating systems, ...)
Mac 10.15.3
raspberry pi 3B

1 Like

As you can see, the L-word is a link in this post and it should provide some guidance on what log(s) might be needed like octoprint.log, for example.