Octoprint Nozzle Size Effect

Before I set this print off again, I wanted to ask a quick question. The print I'm doing is a stock for a PSVR Aim. Half way through and the quality was awful. When I checked, I'd forgotten to change the printer setting in Octoprint for the nozzle size to match the Cura one. So I'm printing with a 0.8, Cura is set to 0.8, but Octoprint is set to 0.4.

Would this have had any effect?

If you sliced it with Cura, then the setting in octoprint wouldn't have any effect

1 Like