What is the problem?
I can't connect m ywindows laptop to my printer
What did you already try to solve it?
I've tried changing my baudrate, and booting in safe mode, along with trying different cables
Logs (syslog, dmesg, ... no logs, no support)
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 7 port/baudrate candidates: COM3@115200, COM3@250000, COM3@230400, COM3@57600, COM3@38400, COM3@19200, COM3@9600
Trying port COM3, baudrate 115200
Connecting to port COM3, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0x2a5b7163d30, open=True>(port='COM3', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 230400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 57600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 38400
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 19200
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Trying port COM3, baudrate 9600
Handshake attempt #1 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #2 with timeout 2.0s
Send: N0 M110 N0*125
Handshake attempt #3 with timeout 2.0s
Send: N0 M110 N0*125
Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
Connection closed, closing down monitor
Additional information about your network (Hardware you are trying to connect to, hardware you are trying to connect from, router, access point, used operating systems, ...)
Windws laptop, followed steps multiple times through OctoPrints website