Octoprint won`t start a print from SD Card

Hey there,
I recently installed the newest Version of Octoprint to my Raspberry Pi 3B+. I´m loading my prints to my SD Card using Cura. So I´m not uploading them via Octoprint because this is too slow in my opinion (7mb gcode takes about 40 min) Everytime I start a print job with Octoprint from the SD Card it starts and cancels the print immediately.
Here´s the log:

2020-04-28 20:30:22,199 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-04-28 20:32:26,021 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: neu/04_gec~1.gco, owner: Chris, user: Chris
2020-04-28 20:32:26,029 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting print from SD"
2020-04-28 20:32:26,032 - octoprint.printer.standard.job - INFO - Print job started - origin: sdcard, path: neu/04_gec~1.gco, owner: Chris, user: Chris
2020-04-28 20:32:26,057 - octoprint.util.comm - INFO - Changing monitoring state from "Starting print from SD" to "Printing from SD"
2020-04-28 20:32:28,165 - octoprint.util.comm - INFO - Changing monitoring state from "Printing from SD" to "Cancelling"
2020-04-28 20:32:28,172 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-04-28 20:32:28,191 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: sdcard, path: neu/04_gec~1.gco, owner: Chris, user: None
2020-04-28 20:32:28,309 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-04-28 20:32:36,890 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting print from SD"
2020-04-28 20:32:36,899 - octoprint.printer.standard.job - INFO - Print job started - origin: sdcard, path: neu/04_gec~1.gco, owner: Chris, user: Chris
2020-04-28 20:32:36,957 - octoprint.util.comm - INFO - Changing monitoring state from "Starting print from SD" to "Printing from SD"
2020-04-28 20:32:39,179 - octoprint.util.comm - INFO - Changing monitoring state from "Printing from SD" to "Cancelling"
2020-04-28 20:32:39,190 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2020-04-28 20:32:39,200 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: sdcard, path: neu/04_gec~1.gco, owner: Chris, user: None
2020-04-28 20:32:39,264 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"

Maybe someone could help me please :slight_smile:

Not much to see in this log
Please upload the serial.log

1 Like

Hey there,
sorry for my late answer (was asking yesterday evening so i wasn´t able to answer during night time :sweat_smile:)
Here´s the serial.log

2020-04-29 07:51:53,050 - Enabling serial logging
2020-04-29 07:51:53,791 - Recv:  T:19.26 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:51:55,778 - Recv:  T:19.34 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:51:57,783 - Recv:  T:19.37 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:51:59,787 - Recv:  T:19.34 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:01,790 - Recv:  T:19.26 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:52:03,793 - Recv:  T:19.34 /0.00 B:19.22 /0.00 @:0 B@:0
2020-04-29 07:52:05,795 - Recv:  T:19.37 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:07,538 - Send: M23 /bereit~1/04_f95_1.gco
2020-04-29 07:52:07,549 - Recv: echo:Now fresh file: /bereit~1/04_f95_1.gco
2020-04-29 07:52:07,559 - Recv: File opened: 04_f95_1.gco Size: 1017012
2020-04-29 07:52:07,562 - Recv: File selected
2020-04-29 07:52:07,580 - Changing monitoring state from "Operational" to "Starting print from SD"
2020-04-29 07:52:07,608 - Recv: ok
2020-04-29 07:52:07,613 - Send: M23 /bereit~1/04_f95_1.gco
2020-04-29 07:52:07,624 - Recv: echo:Now fresh file: /bereit~1/04_f95_1.gco
2020-04-29 07:52:07,627 - Recv: open failed, File: bereit~1.
2020-04-29 07:52:07,628 - Recv: ok
2020-04-29 07:52:07,630 - Send: M24
2020-04-29 07:52:07,635 - Recv: ok
2020-04-29 07:52:07,636 - Changing monitoring state from "Starting print from SD" to "Printing from SD"
2020-04-29 07:52:07,806 - Recv:  T:19.30 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:08,503 - Send: M27
2020-04-29 07:52:08,510 - Recv: Not SD printing
2020-04-29 07:52:08,512 - Recv: ok
2020-04-29 07:52:09,504 - Send: M27
2020-04-29 07:52:09,516 - Recv: Not SD printing
2020-04-29 07:52:09,518 - Recv: ok
2020-04-29 07:52:09,807 - Recv:  T:19.30 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:10,506 - Send: M27
2020-04-29 07:52:10,512 - Recv: Not SD printing
2020-04-29 07:52:10,517 - Changing monitoring state from "Printing from SD" to "Cancelling"
2020-04-29 07:52:10,627 - Recv: ok
2020-04-29 07:52:10,632 - Send: M108
2020-04-29 07:52:10,636 - Recv: ok
2020-04-29 07:52:10,640 - Send: M84
2020-04-29 07:52:10,645 - Recv: ok
2020-04-29 07:52:10,647 - Send: M104 T0 S0
2020-04-29 07:52:10,652 - Recv: ok
2020-04-29 07:52:10,654 - Send: M140 S0
2020-04-29 07:52:10,659 - Recv: ok
2020-04-29 07:52:10,661 - Send: M106 S0
2020-04-29 07:52:10,665 - Recv: ok
2020-04-29 07:52:10,667 - Changing monitoring state from "Cancelling" to "Operational"
2020-04-29 07:52:11,507 - Send: M27
2020-04-29 07:52:11,514 - Recv: Not SD printing
2020-04-29 07:52:11,516 - Recv: ok
2020-04-29 07:52:11,808 - Recv:  T:19.37 /0.00 B:19.37 /0.00 @:0 B@:0
2020-04-29 07:52:12,508 - Send: M27
2020-04-29 07:52:12,514 - Recv: Not SD printing
2020-04-29 07:52:12,516 - Recv: ok
2020-04-29 07:52:13,510 - Send: M27
2020-04-29 07:52:13,521 - Recv: Not SD printing
2020-04-29 07:52:13,524 - Recv: ok
2020-04-29 07:52:13,810 - Recv:  T:19.26 /0.00 B:19.34 /0.00 @:0 B@:0
2020-04-29 07:52:14,511 - Send: M27
2020-04-29 07:52:14,517 - Recv: Not SD printing
2020-04-29 07:52:14,519 - Recv: ok
2020-04-29 07:52:15,512 - Send: M27
2020-04-29 07:52:15,523 - Recv: Not SD printing
2020-04-29 07:52:15,526 - Recv: ok
2020-04-29 07:52:15,811 - Recv:  T:19.37 /0.00 B:19.34 /0.00 @:0 B@:0
2020-04-29 07:52:16,513 - Send: M27
2020-04-29 07:52:16,520 - Recv: Not SD printing
2020-04-29 07:52:16,522 - Recv: ok
2020-04-29 07:52:17,514 - Send: M27
2020-04-29 07:52:17,528 - Recv: Not SD printing
2020-04-29 07:52:17,531 - Recv: ok
2020-04-29 07:52:17,811 - Recv:  T:19.26 /0.00 B:19.34 /0.00 @:0 B@:0
2020-04-29 07:52:18,516 - Send: M27
2020-04-29 07:52:18,522 - Recv: Not SD printing
2020-04-29 07:52:18,524 - Recv: ok
2020-04-29 07:52:19,517 - Send: M27
2020-04-29 07:52:19,527 - Recv: Not SD printing
2020-04-29 07:52:19,529 - Recv: ok
2020-04-29 07:52:19,814 - Recv:  T:19.34 /0.00 B:19.37 /0.00 @:0 B@:0
2020-04-29 07:52:20,518 - Send: M27
2020-04-29 07:52:20,525 - Recv: Not SD printing
2020-04-29 07:52:20,527 - Recv: ok
2020-04-29 07:52:21,519 - Send: M27
2020-04-29 07:52:21,530 - Recv: Not SD printing
2020-04-29 07:52:21,533 - Recv: ok
2020-04-29 07:52:21,814 - Recv:  T:19.30 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:22,193 - Changing monitoring state from "Operational" to "Starting print from SD"
2020-04-29 07:52:22,224 - Send: M23 /bereit~1/04_f95_1.gco
2020-04-29 07:52:22,235 - Recv: echo:Now fresh file: /bereit~1/04_f95_1.gco
2020-04-29 07:52:22,238 - Recv: open failed, File: bereit~1.
2020-04-29 07:52:22,239 - Recv: ok
2020-04-29 07:52:22,246 - Send: M24
2020-04-29 07:52:22,253 - Recv: ok
2020-04-29 07:52:22,255 - Changing monitoring state from "Starting print from SD" to "Printing from SD"
2020-04-29 07:52:22,520 - Send: M27
2020-04-29 07:52:22,525 - Recv: Not SD printing
2020-04-29 07:52:22,526 - Recv: ok
2020-04-29 07:52:23,522 - Send: M27
2020-04-29 07:52:23,537 - Recv: Not SD printing
2020-04-29 07:52:23,540 - Recv: ok
2020-04-29 07:52:23,815 - Recv:  T:19.26 /0.00 B:19.34 /0.00 @:0 B@:0
2020-04-29 07:52:24,523 - Send: M27
2020-04-29 07:52:24,530 - Recv: Not SD printing
2020-04-29 07:52:24,535 - Changing monitoring state from "Printing from SD" to "Cancelling"
2020-04-29 07:52:24,590 - Recv: ok
2020-04-29 07:52:24,596 - Send: M108
2020-04-29 07:52:24,603 - Recv: ok
2020-04-29 07:52:24,607 - Send: M84
2020-04-29 07:52:24,612 - Recv: ok
2020-04-29 07:52:24,616 - Send: M104 T0 S0
2020-04-29 07:52:24,622 - Recv: ok
2020-04-29 07:52:24,626 - Send: M140 S0
2020-04-29 07:52:24,631 - Recv: ok
2020-04-29 07:52:24,633 - Send: M106 S0
2020-04-29 07:52:24,638 - Recv: ok
2020-04-29 07:52:24,641 - Changing monitoring state from "Cancelling" to "Operational"
2020-04-29 07:52:25,525 - Send: M27
2020-04-29 07:52:25,531 - Recv: Not SD printing
2020-04-29 07:52:25,534 - Recv: ok
2020-04-29 07:52:25,815 - Recv:  T:19.30 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:26,526 - Send: M27
2020-04-29 07:52:26,542 - Recv: Not SD printing
2020-04-29 07:52:26,544 - Recv: ok
2020-04-29 07:52:27,531 - Send: M27
2020-04-29 07:52:27,538 - Recv: Not SD printing
2020-04-29 07:52:27,571 - Recv: ok
2020-04-29 07:52:27,815 - Recv:  T:19.34 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:52:28,532 - Send: M27
2020-04-29 07:52:28,538 - Recv: Not SD printing
2020-04-29 07:52:28,541 - Recv: ok
2020-04-29 07:52:29,535 - Send: M27
2020-04-29 07:52:29,542 - Recv: Not SD printing
2020-04-29 07:52:29,549 - Recv: ok
2020-04-29 07:52:29,816 - Recv:  T:19.18 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:30,536 - Send: M27
2020-04-29 07:52:30,543 - Recv: Not SD printing
2020-04-29 07:52:30,545 - Recv: ok
2020-04-29 07:52:31,538 - Send: M27
2020-04-29 07:52:31,549 - Recv: Not SD printing
2020-04-29 07:52:31,552 - Recv: ok
2020-04-29 07:52:31,816 - Recv:  T:19.34 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:52:32,539 - Send: M27
2020-04-29 07:52:32,545 - Recv: Not SD printing
2020-04-29 07:52:32,548 - Recv: ok
2020-04-29 07:52:33,540 - Send: M27
2020-04-29 07:52:33,551 - Recv: Not SD printing
2020-04-29 07:52:33,553 - Recv: ok
2020-04-29 07:52:33,827 - Recv:  T:19.30 /0.00 B:19.34 /0.00 @:0 B@:0
2020-04-29 07:52:34,542 - Send: M27
2020-04-29 07:52:34,547 - Recv: Not SD printing
2020-04-29 07:52:34,549 - Recv: ok
2020-04-29 07:52:35,545 - Send: M27
2020-04-29 07:52:35,556 - Recv: Not SD printing
2020-04-29 07:52:35,558 - Recv: ok
2020-04-29 07:52:35,827 - Recv:  T:19.37 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:52:36,546 - Send: M27
2020-04-29 07:52:36,552 - Recv: Not SD printing
2020-04-29 07:52:36,554 - Recv: ok
2020-04-29 07:52:37,548 - Send: M27
2020-04-29 07:52:37,559 - Recv: Not SD printing
2020-04-29 07:52:37,562 - Recv: ok
2020-04-29 07:52:37,828 - Recv:  T:19.34 /0.00 B:19.30 /0.00 @:0 B@:0
2020-04-29 07:52:38,549 - Send: M27
2020-04-29 07:52:38,555 - Recv: Not SD printing
2020-04-29 07:52:38,558 - Recv: ok
2020-04-29 07:52:39,551 - Send: M27
2020-04-29 07:52:39,562 - Recv: Not SD printing
2020-04-29 07:52:39,566 - Recv: ok
2020-04-29 07:52:39,830 - Recv:  T:19.22 /0.00 B:19.26 /0.00 @:0 B@:0
2020-04-29 07:52:40,552 - Send: M27
2020-04-29 07:52:40,559 - Recv: Not SD printing
2020-04-29 07:52:40,561 - Recv: ok
2020-04-29 07:52:41,553 - Send: M27
2020-04-29 07:52:41,565 - Recv: Not SD printing
2020-04-29 07:52:41,568 - Recv: ok
2020-04-29 07:52:41,829 - Recv:  T:19.26 /0.00 B:19.22 /0.00 @:0 B@:0

Thanks for your quick response to my topic

No worries :wink:

It seems like your printer confuses the folder bereit* with the file name.
Try it without folders - put the gcode file right in the root directory of the sd card.
I would also delete all folders (just to be sure)

1 Like

Now it all works just fine. Thanks a lot for your help :smile:

1 Like