What is the problem?
Octorprint sent a M104 S0 command for no reason after 600 seconds. It does this when printing or not.
I think it comes from the plugin HeaterTimeout
What did you already try to solve it?
I've uninstall the plugin HeaterTimeout but the problem still present
Have you tried running in safe mode?
Yes
Did running in safe mode solve the problem?
Yes, no M104 S0 command sent after 600 secondes
Systeminfo Bundle
Serial.log
Blockquote
2021-12-23 11:18:49,633 - Recv: T:189.90 /190.00 B:24.84 /0.00 @:75 B@:0
2021-12-23 11:18:51,633 - Recv: T:189.97 /190.00 B:24.92 /0.00 @:74 B@:0
2021-12-23 11:18:53,638 - Recv: T:189.97 /190.00 B:24.92 /0.00 @:74 B@:0
2021-12-23 11:18:55,641 - Recv: T:189.97 /190.00 B:24.92 /0.00 @:74 B@:0
2021-12-23 11:18:57,634 - Recv: T:190.00 /190.00 B:24.96 /0.00 @:73 B@:0
2021-12-23 11:18:59,635 - Recv: T:190.00 /190.00 B:24.84 /0.00 @:74 B@:0
2021-12-23 11:19:01,637 - Recv: T:190.00 /190.00 B:24.96 /0.00 @:74 B@:0
2021-12-23 11:19:03,633 - Recv: T:190.00 /190.00 B:24.96 /0.00 @:74 B@:0
2021-12-23 11:19:05,636 - Recv: T:190.00 /190.00 B:24.88 /0.00 @:74 B@:0
2021-12-23 11:19:07,637 - Recv: T:190.00 /190.00 B:24.88 /0.00 @:74 B@:0
2021-12-23 11:19:07,716 - Send: M104 S0
2021-12-23 11:19:07,723 - Recv: //action:notification LK4 Pro prete.
2021-12-23 11:19:07,726 - Recv: ok
2021-12-23 11:19:09,639 - Recv: T:190.00 /0.00 B:24.92 /0.00 @:0 B@:0
2021-12-23 11:19:11,637 - Recv: T:189.58 /0.00 B:24.88 /0.00 @:0 B@:0
2021-12-23 11:19:13,633 - Recv: T:188.52 /0.00 B:24.88 /0.00 @:0 B@:0
2021-12-23 11:19:15,636 - Recv: T:186.67 /0.00 B:24.92 /0.00 @:0 B@:0
2021-12-23 11:19:17,636 - Recv: T:184.57 /0.00 B:25.00 /0.00 @:0 B@:0
2021-12-23 11:19:19,633 - Recv: T:181.92 /0.00 B:24.69 /0.00 @:0 B@:0
2021-12-23 11:19:21,634 - Recv: T:179.23 /0.00 B:24.92 /0.00 @:0 B@:0
2021-12-23 11:19:23,638 - Recv: T:176.42 /0.00 B:24.88 /0.00 @:0 B@:0
2021-12-23 11:19:25,638 - Recv: T:173.20 /0.00 B:24.92 /0.00 @:0 B@:0
2021-12-23 11:19:27,633 - Recv: T:170.04 /0.00 B:24.73 /0.00 @:0 B@:0
2021-12-23 11:19:29,633 - Recv: T:167.00 /0.00 B:24.84 /0.00 @:0 B@:0
2021-12-23 11:19:31,634 - Recv: T:163.87 /0.00 B:24.80 /0.00 @:0 B@:0
2021-12-23 11:19:33,633 - Recv: T:160.67 /0.00 B:24.92 /0.00 @:0 B@:0
2021-12-23 11:19:35,635 - Recv: T:157.34 /0.00 B:24.88 /0.00 @:0 B@:0
Blockquote
2021-12-23 11:19:07,725 - octoprint.plugins.action_command_notification - INFO - Got a notification: LK4 Pro prete.
2021-12-23 11:19:07,726 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification LK4 Pro prete.'
2021-12-23 11:19:07,726 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification LK4 Pro prete.'
Additional information about your setup
Octoprint Version 1.7.2 Version 0.18.0, running on Raspberry Pi 4 Model B Rev 1.1
How can I remove this 600 second heater timeout set up by the HeaterTimeout plugin. I already reinstalled and uninstalled the plugins but that doesn't fix the problem.
Thanks for your help.octoprint-systeminfo-20211223145753.zip (390.3 KB)