Pauses in octoprint

Matias_Suarez · December 24, 2019, 7:01pm

when the printer starts printing, it pauses and then continues printing.

Send: N1045 G0 X148.577 Y121.99*34
Recv: //callback_pf error
Recv: Resend:1045
Recv: //last:1044 curr:1047 rcv:N1047 G0 F3600 X146.088 Y118.935*125
Send: N1045 G0 X148.577 Y121.99*34
Recv: 
Recv: //callback_pf error
Recv: ok N:1045
Send: N1046 G1 F1800 X145.72 Y119.133 E255.16234*3
Recv: ok duplicate line:1045
Send: N1047 G0 F3600 X146.088 Y118.935*125
Recv: ok N:1045
Recv: ok N:1046
Send: N1048 G1 F1800 X148.404 Y121.251 E255.27128*53
Send: N1049 G0 F3600 X148.231 Y120.512*127
Recv: ok N:1047
Send: N1050 G1 F1800 X146.455 Y118.737 E255.35479*59
Recv: ok N:1048
Send: N1051 G0 F3600 X146.823 Y118.539*115
Recv: ok N:1049
Send: N1052 G1 F1800 X148.058 Y119.773 E255.41286*58
Recv: ok N:1050
Send: N1053 G0 F3600 X147.885 Y119.035*116
Recv: ok N:1051
Send: N1054 G1 F1800 X147.191 Y118.341 E255.4455*10
Recv: ok N:1052
Send: N1055 G0 F3600 X147.558 Y118.142*127
Recv: ok N:1053
Send: N1056 G1 F1800 X147.712 Y118.296 E255.45275*63
Recv: ok N:1054
Send: N1057 G0 F3600 X143.663 Y119.634*117
Recv: ok N:1055
Send: N1058 G0 X142.575 Y119.382*20
Recv: ok N:1056
Send: N1059 G1 F1800 X140.763 Y117.57 E255.53798*0
Recv: ok N:1057
Send: N1060 G0 F3600 X140.985 Y117.226*124
Recv: ok N:1058
Send: N1061 G1 F1800 X142.016 Y118.257 E255.58647*57
Recv: ok N:1059
Send: N1062 G1 X142.086 Y118.327*27
Recv: ok N:1060
Send: N1063 G0 F3600 X141.457 Y117.132*122
Recv: ok N:1061
Send: N1064 G1 F1800 X141.207 Y116.882 E255.59823*60
Recv: ok N:1062
Send: N1065 G0 F3600 X134.697 Y126.005*119
Recv: ok N:1063
Send: N1066 G0 X134.014 Y126.707*31
Recv: ok N:1064
Send: N1067 G0 X127.902 Y120.548*29
Recv: ok N:1065
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: Resend:1066
Recv: //last:1065 curr:1067 rcv:N1067 G0 X127.902 Y120.548*29
Send: N1066 G0 X134.014 Y126.707*31
Recv: 
Recv: //callback_pf error
Recv: Resend:1066
Recv: //last:1065 curr:1068 rcv:N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: 
Send: N1066 G0 X134.014 Y126.707*31
Recv: //callback_pf error
Recv: ok N:1066
Send: N1067 G0 X127.902 Y120.548*29
Recv: ok duplicate line:1066
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: ok N:1066
Send: N1069 G0 F3600 X102.915 Y94.996*64
Recv: Resend:1067
Recv: //last:1066 curr:1068 rcv:N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Send: N1067 G0 X127.902 Y120.548*29
Recv: 
Recv: //callback_pf error
Recv: Resend:1067
Recv: //last:1066 curr:1069 rcv:N1069 G0 F3600 X102.915 Y94.996*64
Send: N1067 G0 X127.902 Y120.548*29
Recv: 
Recv: //callback_pf error
Recv: ok N:1067
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: ok duplicate line:1067
Send: N1069 G0 F3600 X102.915 Y94.996*64
Recv: ok N:1067
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: ok N:1068
Send: N1071 G1 X125.225 Y117.306*31
Recv: ok N:1069
Recv: Resend:1070
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: //last:1069 curr:1071 rcv:N1071 G1 X125.225 Y117.306*31
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: 
Recv: //callback_pf error
Recv: Resend:1070
Recv: //last:1069 curr:1072 rcv:N1072 G0 F3600 X124.939 Y116.454*120
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: 
Recv: //callback_pf error
Recv: ok N:1070
Send: N1071 G1 X125.225 Y117.306*31
Recv: ok duplicate line:1070
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: ok N:1070
Send: N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Recv: Resend:1071
Recv: //last:1070 curr:1072 rcv:N1072 G0 F3600 X124.939 Y116.454*120
Send: N1071 G1 X125.225 Y117.306*31
Recv: 
Recv: //callback_pf error
Recv: Resend:1071
Recv: //last:1070 curr:1073 rcv:N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Send: N1071 G1 X125.225 Y117.306*31
Recv: 
Recv: //callback_pf error
Recv: ok N:1071
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: ok duplicate line:1071
Send: N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Recv: ok N:1071
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: ok N:1072
Send: N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Recv: ok N:1073
Send: N1076 G1 X124.682 Y115.631*19
Recv: Resend:1074
Recv: //last:1073 curr:1075 rcv:N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: 
Recv: //callback_pf error
Recv: Resend:1074
Recv: //last:1073 curr:1076 rcv:N1076 G1 X124.682 Y115.631*19
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: 
Recv: //callback_pf error
Recv: ok N:1074
Send: N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Recv: ok duplicate line:1074
Send: N1076 G1 X124.682 Y115.631*19
Recv: ok N:1074
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: ok N:1075
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: wait
Send: N1079 M105*24
Recv: ok N:1076
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: Resend:1077
Recv: //last:1076 curr:1079 rcv:N1079 M105*24
Recv: 
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: //callback_pf error
Recv: Resend:1077
Recv: //last:1076 curr:1080 rcv:N1080 G0 F3600 X103.848 Y93.666*72
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: 
Recv: //callback_pf error
Recv: ok N:1077
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: ok duplicate line:1077
Send: N1079 M105*24
Recv: wait
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: ok N:1077
Send: N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Recv: Resend:1078
Recv: //last:1077 curr:1080 rcv:N1080 G0 F3600 X103.848 Y93.666*72
Recv: 
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: //callback_pf error
Recv: Resend:1078
Recv: //last:1077 curr:1081 rcv:N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: 
Recv: //callback_pf error
Recv: ok N:1078
Send: N1079 M105*24
Recv: ok duplicate line:1078
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: ok N:1078
Send: N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Recv: ok T:210 /210 B:60 /60 @:83 B@:128
Send: N1082 G1 X124.028 Y113.846*22
Recv: ok N:1080
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: ok N:1081
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: ok N:1082
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: Resend:1083
Recv: //last:1082 curr:1084 rcv:N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: 
Recv: //callback_pf error
Recv: Resend:1083
Recv: //last:1082 curr:1085 rcv:N1085 G0 F3600 X104.983 Y93.669*67
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: 
Recv: //callback_pf error
Recv: ok N:1083
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: ok duplicate line:1083
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: wait
Send: N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Recv: ok N:1083
Send: N1087 G1 X123.374 Y112.06*35
Recv: Resend:1084
Recv: //last:1083 curr:1086 rcv:N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: 
Recv: //callback_pf error
Recv: Resend:1084
Recv: //last:1083 curr:1087 rcv:N1087 G1 X123.374 Y112.06*35
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: 
Recv: //callback_pf error
Recv: ok N:1084
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: ok duplicate line:1084
Send: N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Recv: ok N:1084
Recv: ok N:1085
Send: N1087 G1 X123.374 Y112.06*35
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: ok N:1086
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: ok N:1087
Send: N1090 M105*31
Recv: Resend:1088
Recv: //last:1087 curr:1089 rcv:N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: 
Recv: //callback_pf error
Recv: Resend:1088
Recv: //last:1087 curr:1090 rcv:N1090 M105*31
Recv: 
Recv: //callback_pf error
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: ok N:1088
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: ok duplicate line:1088
Send: N1090 M105*31
Recv: wait
Send: N1091 G0 F3600 X106.119 Y93.673*68
Recv: ok N:1088
Send: N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Recv: Resend:1089
Recv: //last:1088 curr:1091 rcv:N1091 G0 F3600 X106.119 Y93.673*68
Recv: 
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: //callback_pf error
Recv: Resend:1089
Recv: //last:1088 curr:1092 rcv:N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: 
Recv: //callback_pf error
Recv: ok N:1089
Send: N1090 M105*31
Recv: ok duplicate line:1089
Send: N1091 G0 F3600 X106.119 Y93.673*68
Recv: ok N:1089
Send: N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Recv: ok T:210 /210 B:61 /60 @:82 B@:0
Send: N1093 G1 X122.719 Y110.274*29
Recv: ok N:1091
Recv: ok N:1092
Send: N1094 G0 F3600 X122.323 Y109.312*124
Send: N1095 G1 F1800 X106.686 Y93.676 E265.88984*6
Recv: ok N:1093
Send: N1096 G0 F3600 X107.254 Y93.678*67
Recv: ok N:1094
Send: N1097 G1 F1800 X121.995 Y108.419 E266.58321*63
Recv: ok N:1095
Recv: ok N:1096
Send: N1098 G1 X122.065 Y108.489*23
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: ok N:1097
Recv: Resend:1098
Send: N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Recv: //last:1097 curr:1099 rcv:N1099 G0 F3600 X121.669 Y107.526*118
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: 
Recv: //callback_pf error
Recv: Resend:1098
Recv: //last:1097 curr:1100 rcv:N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Send: N1098 G1 X122.065 Y108.489*23
Recv: 
Recv: //callback_pf error
Recv: Resend:1098
Recv: //last:1097 curr:1099 rcv:N1099 G0 F3600 X121.669 Y107.526*118
Send: N1098 G1 X122.065 Y108.489*23
Recv: 
Recv: //callback_pf error
Recv: wait
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: ok N:1098
Send: N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Recv: ok N:1099
Send: N1101 G0 F3600 X108.39 Y93.682*127

PrintedWeezl · December 25, 2019, 2:01am

Matias_Suarez · December 26, 2019, 5:55pm

The problem is that when I start printing it starts normally, after a while it pauses and continues normally and then another pause and continues. The problem is that it leaves me a lot of filament points in each pause, so that a well-defined 3d impression is not obtained.

Ewald_Ikemann · December 26, 2019, 8:56pm

Please share the regular logs, because they include the timestamp.
Also the other information that have been asked for in the template you have deleted when you started this thread.

Matias_Suarez · December 27, 2019, 6:15pm

Send: N1045 G0 X148.577 Y121.99*34
Recv: //callback_pf error
Recv: Resend:1045
Recv: //last:1044 curr:1047 rcv:N1047 G0 F3600 X146.088 Y118.935*125
Send: N1045 G0 X148.577 Y121.99*34
Recv: 
Recv: //callback_pf error
Recv: ok N:1045
Send: N1046 G1 F1800 X145.72 Y119.133 E255.16234*3
Recv: ok duplicate line:1045
Send: N1047 G0 F3600 X146.088 Y118.935*125
Recv: ok N:1045
Recv: ok N:1046
Send: N1048 G1 F1800 X148.404 Y121.251 E255.27128*53
Send: N1049 G0 F3600 X148.231 Y120.512*127
Recv: ok N:1047
Send: N1050 G1 F1800 X146.455 Y118.737 E255.35479*59
Recv: ok N:1048
Send: N1051 G0 F3600 X146.823 Y118.539*115
Recv: ok N:1049
Send: N1052 G1 F1800 X148.058 Y119.773 E255.41286*58
Recv: ok N:1050
Send: N1053 G0 F3600 X147.885 Y119.035*116
Recv: ok N:1051
Send: N1054 G1 F1800 X147.191 Y118.341 E255.4455*10
Recv: ok N:1052
Send: N1055 G0 F3600 X147.558 Y118.142*127
Recv: ok N:1053
Send: N1056 G1 F1800 X147.712 Y118.296 E255.45275*63
Recv: ok N:1054
Send: N1057 G0 F3600 X143.663 Y119.634*117
Recv: ok N:1055
Send: N1058 G0 X142.575 Y119.382*20
Recv: ok N:1056
Send: N1059 G1 F1800 X140.763 Y117.57 E255.53798*0
Recv: ok N:1057
Send: N1060 G0 F3600 X140.985 Y117.226*124
Recv: ok N:1058
Send: N1061 G1 F1800 X142.016 Y118.257 E255.58647*57
Recv: ok N:1059
Send: N1062 G1 X142.086 Y118.327*27
Recv: ok N:1060
Send: N1063 G0 F3600 X141.457 Y117.132*122
Recv: ok N:1061
Send: N1064 G1 F1800 X141.207 Y116.882 E255.59823*60
Recv: ok N:1062
Send: N1065 G0 F3600 X134.697 Y126.005*119
Recv: ok N:1063
Send: N1066 G0 X134.014 Y126.707*31
Recv: ok N:1064
Send: N1067 G0 X127.902 Y120.548*29
Recv: ok N:1065
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: Resend:1066
Recv: //last:1065 curr:1067 rcv:N1067 G0 X127.902 Y120.548*29
Send: N1066 G0 X134.014 Y126.707*31
Recv: 
Recv: //callback_pf error
Recv: Resend:1066
Recv: //last:1065 curr:1068 rcv:N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: 
Send: N1066 G0 X134.014 Y126.707*31
Recv: //callback_pf error
Recv: ok N:1066
Send: N1067 G0 X127.902 Y120.548*29
Recv: ok duplicate line:1066
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: ok N:1066
Send: N1069 G0 F3600 X102.915 Y94.996*64
Recv: Resend:1067
Recv: //last:1066 curr:1068 rcv:N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Send: N1067 G0 X127.902 Y120.548*29
Recv: 
Recv: //callback_pf error
Recv: Resend:1067
Recv: //last:1066 curr:1069 rcv:N1069 G0 F3600 X102.915 Y94.996*64
Send: N1067 G0 X127.902 Y120.548*29
Recv: 
Recv: //callback_pf error
Recv: ok N:1067
Send: N1068 G1 F1800 X102.763 Y95.409 E256.78069*3
Recv: ok duplicate line:1067
Send: N1069 G0 F3600 X102.915 Y94.996*64
Recv: ok N:1067
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: ok N:1068
Send: N1071 G1 X125.225 Y117.306*31
Recv: ok N:1069
Recv: Resend:1070
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: //last:1069 curr:1071 rcv:N1071 G1 X125.225 Y117.306*31
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: 
Recv: //callback_pf error
Recv: Resend:1070
Recv: //last:1069 curr:1072 rcv:N1072 G0 F3600 X124.939 Y116.454*120
Send: N1070 G1 F1800 X125.155 Y117.236 E257.82679*62
Recv: 
Recv: //callback_pf error
Recv: ok N:1070
Send: N1071 G1 X125.225 Y117.306*31
Recv: ok duplicate line:1070
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: ok N:1070
Send: N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Recv: Resend:1071
Recv: //last:1070 curr:1072 rcv:N1072 G0 F3600 X124.939 Y116.454*120
Send: N1071 G1 X125.225 Y117.306*31
Recv: 
Recv: //callback_pf error
Recv: Resend:1071
Recv: //last:1070 curr:1073 rcv:N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Send: N1071 G1 X125.225 Y117.306*31
Recv: 
Recv: //callback_pf error
Recv: ok N:1071
Send: N1072 G0 F3600 X124.939 Y116.454*120
Recv: ok duplicate line:1071
Send: N1073 G1 F1800 X103.067 Y94.581 E258.85561*10
Recv: ok N:1071
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: ok N:1072
Send: N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Recv: ok N:1073
Send: N1076 G1 X124.682 Y115.631*19
Recv: Resend:1074
Recv: //last:1073 curr:1075 rcv:N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: 
Recv: //callback_pf error
Recv: Resend:1074
Recv: //last:1073 curr:1076 rcv:N1076 G1 X124.682 Y115.631*19
Send: N1074 G0 F3600 X103.219 Y94.168*67
Recv: 
Recv: //callback_pf error
Recv: ok N:1074
Send: N1075 G1 F1800 X124.612 Y115.561 E259.86187*53
Recv: ok duplicate line:1074
Send: N1076 G1 X124.682 Y115.631*19
Recv: ok N:1074
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: ok N:1075
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: wait
Send: N1079 M105*24
Recv: ok N:1076
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: Resend:1077
Recv: //last:1076 curr:1079 rcv:N1079 M105*24
Recv: 
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: //callback_pf error
Recv: Resend:1077
Recv: //last:1076 curr:1080 rcv:N1080 G0 F3600 X103.848 Y93.666*72
Send: N1077 G0 F3600 X124.285 Y114.668*126
Recv: 
Recv: //callback_pf error
Recv: ok N:1077
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: ok duplicate line:1077
Send: N1079 M105*24
Recv: wait
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: ok N:1077
Send: N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Recv: Resend:1078
Recv: //last:1077 curr:1080 rcv:N1080 G0 F3600 X103.848 Y93.666*72
Recv: 
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: //callback_pf error
Recv: Resend:1078
Recv: //last:1077 curr:1081 rcv:N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Send: N1078 G1 F1800 X103.37 Y93.753 E260.84565*48
Recv: 
Recv: //callback_pf error
Recv: ok N:1078
Send: N1079 M105*24
Recv: ok duplicate line:1078
Send: N1080 G0 F3600 X103.848 Y93.666*72
Recv: ok N:1078
Send: N1081 G1 F1800 X123.958 Y113.776 E261.79156*61
Recv: ok T:210 /210 B:60 /60 @:83 B@:128
Send: N1082 G1 X124.028 Y113.846*22
Recv: ok N:1080
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: ok N:1081
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: ok N:1082
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: Resend:1083
Recv: //last:1082 curr:1084 rcv:N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: 
Recv: //callback_pf error
Recv: Resend:1083
Recv: //last:1082 curr:1085 rcv:N1085 G0 F3600 X104.983 Y93.669*67
Send: N1083 G0 F3600 X123.631 Y112.883*116
Recv: 
Recv: //callback_pf error
Recv: ok N:1083
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: ok duplicate line:1083
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: wait
Send: N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Recv: ok N:1083
Send: N1087 G1 X123.374 Y112.06*35
Recv: Resend:1084
Recv: //last:1083 curr:1086 rcv:N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: 
Recv: //callback_pf error
Recv: Resend:1084
Recv: //last:1083 curr:1087 rcv:N1087 G1 X123.374 Y112.06*35
Send: N1084 G1 F1800 X104.416 Y93.668 E262.69537*12
Recv: 
Recv: //callback_pf error
Recv: ok N:1084
Send: N1085 G0 F3600 X104.983 Y93.669*67
Recv: ok duplicate line:1084
Send: N1086 G1 F1800 X123.304 Y111.99 E263.55714*1
Recv: ok N:1084
Recv: ok N:1085
Send: N1087 G1 X123.374 Y112.06*35
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: ok N:1086
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: ok N:1087
Send: N1090 M105*31
Recv: Resend:1088
Recv: //last:1087 curr:1089 rcv:N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: 
Recv: //callback_pf error
Recv: Resend:1088
Recv: //last:1087 curr:1090 rcv:N1090 M105*31
Recv: 
Recv: //callback_pf error
Send: N1088 G0 F3600 X122.977 Y111.097*125
Recv: ok N:1088
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: ok duplicate line:1088
Send: N1090 M105*31
Recv: wait
Send: N1091 G0 F3600 X106.119 Y93.673*68
Recv: ok N:1088
Send: N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Recv: Resend:1089
Recv: //last:1088 curr:1091 rcv:N1091 G0 F3600 X106.119 Y93.673*68
Recv: 
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: //callback_pf error
Recv: Resend:1089
Recv: //last:1088 curr:1092 rcv:N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Send: N1089 G1 F1800 X105.551 Y93.671 E264.3768*56
Recv: 
Recv: //callback_pf error
Recv: ok N:1089
Send: N1090 M105*31
Recv: ok duplicate line:1089
Send: N1091 G0 F3600 X106.119 Y93.673*68
Recv: ok N:1089
Send: N1092 G1 F1800 X122.649 Y110.204 E265.15435*60
Recv: ok T:210 /210 B:61 /60 @:82 B@:0
Send: N1093 G1 X122.719 Y110.274*29
Recv: ok N:1091
Recv: ok N:1092
Send: N1094 G0 F3600 X122.323 Y109.312*124
Send: N1095 G1 F1800 X106.686 Y93.676 E265.88984*6
Recv: ok N:1093
Send: N1096 G0 F3600 X107.254 Y93.678*67
Recv: ok N:1094
Send: N1097 G1 F1800 X121.995 Y108.419 E266.58321*63
Recv: ok N:1095
Recv: ok N:1096
Send: N1098 G1 X122.065 Y108.489*23
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: ok N:1097
Recv: Resend:1098
Send: N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Recv: //last:1097 curr:1099 rcv:N1099 G0 F3600 X121.669 Y107.526*118
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: 
Recv: //callback_pf error
Recv: Resend:1098
Recv: //last:1097 curr:1100 rcv:N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Send: N1098 G1 X122.065 Y108.489*23
Recv: 
Recv: //callback_pf error
Recv: Resend:1098
Recv: //last:1097 curr:1099 rcv:N1099 G0 F3600 X121.669 Y107.526*118
Send: N1098 G1 X122.065 Y108.489*23
Recv: 
Recv: //callback_pf error
Recv: wait
Send: N1099 G0 F3600 X121.669 Y107.526*118
Recv: ok N:1098
Send: N1100 G1 F1800 X107.822 Y93.68 E267.23451*53
Recv: ok N:1099
Send: N1101 G0 F3600 X108.39 Y93.682*127

2 3 /3

Ed

Ewald_Ikemann · December 27, 2019, 7:15pm

Please share more informations!

Matias_Suarez · December 30, 2019, 4:41pm

Where can i found the regular logs?

Ewald_Ikemann · December 30, 2019, 4:47pm

Pleas click the word logs...

Matias_Suarez · December 31, 2019, 11:22am

i start with new printer and i have the followin error, i put the gcode to star my machine when test the levelling and finish that, all temp down and stop print.

Connecting to: /dev/ttyUSB1
Changing monitoring state from "Offline" to "Opening serial port"
Connected to: Serial<id=0x6515f1f0, open=True>(port='/dev/ttyUSB1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from "Opening serial port" to "Connecting"
Send: N0 M110 N0*125
Send: N0 M110 N0*125
Recv: ok N:0
Changing monitoring state from "Connecting" to "Operational"
Send: N0 M110 N0*125
Recv: ok N:0
Recv: ok N:0
Send: N1 M115*39
Send: N2 M21*18
Recv: ok CBD make it.Date:Mar  4 2019 Time:20:06:58
Recv: ok N:2
Send: N3 M105*36
Recv: ok T:208 /208 B:66 /65 @:64 B@:0
Send: N4 M105*35
Recv: ok T:208 /208 B:66 /65 @:74 B@:0
Send: N5 M105*34
Recv: ok T:208 /208 B:66 /65 @:80 B@:0
Send: N6 M105*33
Recv: ok T:207 /208 B:65 /65 @:88 B@:128
Send: N7 M105*32
Recv: ok T:207 /208 B:65 /65 @:90 B@:128
Send: N8 M105*47
Recv: ok T:207 /208 B:65 /65 @:90 B@:128
Send: N9 M105*46
Recv: ok T:207 /208 B:66 /65 @:87 B@:0
Changing monitoring state from "Operational" to "Starting"
Send: N0 M110 N0*125
Recv: ok N:0
Send: N1 G21*27
Recv: ok N:1
Send: N2 G90*18
Recv: ok N:2
Send: N3 M140 S60*80
Recv: ok N:3
Send: N4 M82*29
Recv: ok N:4
Send: N5 M107*32
Recv: ok N:5
Send: N6 G28 X0 Y0*20
Recv: wait
Send: N7 G28 Z0*94
Recv: wait
Send: N8 G29*26
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: wait
Send: N10 M105*22
Recv: wait
Send: N11 G92 E0*119
Recv: wait
Send: N12 M104 S210*85
Recv: wait
Send: N13 M105*21
Recv: wait
Send: N14 G1 F200 E30*47
Recv: wait
Send: N15 M105*19
Recv: wait
Send: N16 G92 E0*112
Recv: wait
Send: N17 G1 F {travel_speed}*126
Recv: ok N:6
Send: N18 M105*30
Recv: //Contain Unknown opts:N17 G1 F {travel_speed}*126
Recv: 
Recv: //sd cmd error cnt:7 len:28 :N17 G1 F {travel_speed}*126
Recv: 
Recv: ok
Recv: Resend:7
Send: N19 M117 Imprimiendo*119
Recv: //last:6 curr:18 rcv:N18 M105*30
Send: N7 G28 Z0*94
Recv: 
Recv: //callback_pf error
Recv: Resend:7
Recv: //last:6 curr:19 rcv:N19 M117 Imprimiendo
Recv: //callback_pf error
Send: N7 G28 Z0*94
Recv: wait
Send: N8 G29*26
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: wait
Send: N10 M105*22
Recv: wait
Send: N11 G92 E0*119
Recv: wait
Send: N12 M104 S210*85
Recv: wait
Send: N13 M105*21
Recv: wait
Send: N14 G1 F200 E30*47
Recv: ok N:7
Send: N15 M105*19
Recv: Resend:8
Recv: //last:7 curr:14 rcv:N14 G1 F200 E30*47
Send: N8 G29*26
Recv: 
Recv: //callback_pf error
Recv: Resend:8
Recv: //last:7 curr:15 rcv:N15 M105*19
Recv: 
Send: N8 G29*26
Recv: //callback_pf error
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: wait
Send: N10 M105*22
Recv: wait
Send: N11 G92 E0*119
Recv: wait
Send: N12 M104 S210*85
Recv: wait
Send: N13 M105*21
Recv: wait
Send: N14 G1 F200 E30*47
Recv: wait
Send: N15 M105*19
Recv: wait
Send: N16 G92 E0*112
Recv: wait
Send: N17 G1 F {travel_speed}*126
Recv: wait
Send: N18 M105*30
Recv: wait
Send: N19 M117 Imprimiendo*119
Recv: wait
Send: N20 M105*21
Recv: wait
Send: N21 M105*20
Recv: wait
Changing monitoring state from "Starting" to "Printing"
Send: N22 G90*32
Recv: wait
Send: N23 M82*40
Recv: wait
Send: N24 M105*17
Recv: wait
Send: N25 M106 S0*80
Recv: wait
Send: N26 M105*19
Recv: wait
Send: N27 M140 S60*102
Recv: wait
Send: N28 M190 S60*100
Recv: wait
Send: N29 M104 S215 T0*28
Recv: wait
Send: N30 M109 S215 T0*25
Recv: wait
Send: Start:
Send: N31 G21*40
Recv: wait
Send: N32 G90*33
Recv: ok N:8
Recv: Resend:9
Send: N33 M140 S60*99
Recv: //last:8 curr:32 rcv:N32 G90*33
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: Resend:9
Recv: //last:8 curr:33 rcv:N33 M140 S60*99
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:8 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:9 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:10 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Recv: 
Recv: //callback_pf error
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:11 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:12 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:13 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Recv: 
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:14 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Recv: 
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:15 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:16 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 M105*22
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: //sd cmd error cnt:17 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv: 
Recv: ok
Send: N10 M105*22
Recv: Resend:9
Printer keeps requesting line 9 again and again, communication stuck
Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 9 again and again, communication stuck"
Send: M112
Send: N34 M112*22
Send: N35 M104 T0 S0*23
Send: N36 M140 S0*80
Changing monitoring state from "Error: Printer keeps requesting line 9 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 9 again and again, communication stuck)"
Connection closed, closing down monitor

Matias_Suarez · January 1, 2020, 3:40pm

serial.log (97.3 KB)

Ewald_Ikemann · January 1, 2020, 4:10pm

Ok, so first there is this:

2019-12-31 11:04:27,463 - Send: N20 G1 Z30.0 F {travel_speed}*29

You may check the start code of your slicer (I assume Cura) : When I try to print something I keep getting a "format error" from the printer on a line containing "{travel_speed}"

Also check if the slicer is set to Repetier firmware flavour.

Run in safemode if the error persists.

And also check if you have some marlin only plugins installed.

Matias_Suarez · January 4, 2020, 2:13pm

hi, i change my gcode (speed_travel) but the system say the same, i use simplify.
afte.

Once the printer starts check the table levels, go back home and there it is and the temperature goes out.
Another thing that the printer does is that it is not warming me the nozzle or the table before starting to print with which I have to do it manually.

Send: N39 M10529
Recv: ok T:149 /200 B:47 /60 @:128 B@:128
Send: N40 M10519
Recv: ok T:151 /200 B:47 /60 @:128 B@:128
Send: N41 M10518
Recv: ok T:155 /200 B:48 /60 @:128 B@:128
Send: N42 M10517
Recv: ok T:146 /200 B:48 /60 @:128 B@:128
Send: N43 M10516
Recv: ok T:155 /200 B:49 /60 @:128 B@:128
Send: N44 M10523
Recv: ok T:163 /200 B:49 /60 @:128 B@:128
Send: N45 M10522
Recv: ok T:164 /200 B:49 /60 @:128 B@:128
Send: N46 M10521
Recv: ok T:161 /200 B:50 /60 @:128 B@:128
Send: N47 M10520
Recv: ok T:166 /200 B:50 /60 @:128 B@:128
Send: N48 M10527
Recv: ok T:171 /200 B:50 /60 @:128 B@:128
Send: N49 M10526
Recv: ok T:171 /200 B:51 /60 @:128 B@:128
Send: N50 M10518
Recv: ok T:176 /200 B:51 /60 @:128 B@:128
Send: N51 M10519
Recv: ok T:174 /200 B:51 /60 @:128 B@:128
Send: N52 M10516
Recv: ok T:176 /200 B:52 /60 @:128 B@:128
Send: N53 M10517
Recv: ok T:182 /200 B:52 /60 @:128 B@:128
Send: N54 M10522
Recv: ok T:176 /200 B:52 /60 @:128 B@:128
Send: N55 M10523
Recv: ok T:181 /200 B:53 /60 @:128 B@:128
Send: N56 M10520
Recv: ok T:192 /200 B:53 /60 @:0 B@:128
Send: N57 M10521
Recv: ok T:182 /200 B:53 /60 @:128 B@:128
Send: N58 M10526
Recv: ok T:171 /200 B:54 /60 @:128 B@:128
Send: N59 M10527
Recv: ok T:182 /200 B:54 /60 @:128 B@:128
Send: N60 M10517
Recv: ok T:169 /200 B:54 /60 @:128 B@:128
Send: N61 M10516
Recv: ok T:167 /200 B:55 /60 @:128 B@:128
Send: N62 M10519
Recv: ok T:165 /200 B:55 /60 @:128 B@:128
Send: N63 M10518
Recv: ok T:204 /200 B:55 /60 @:0 B@:128
Send: N64 M10521
Recv: ok T:207 /200 B:56 /60 @:0 B@:128
Send: N65 M10520
Recv: ok T:208 /200 B:56 /60 @:0 B@:128
Send: N66 M10523
Recv: ok T:205 /200 B:56 /60 @:0 B@:128
Send: N67 M10522
Recv: ok T:194 /200 B:57 /60 @:0 B@:128
Send: N68 M10525
Recv: ok T:187 /200 B:57 /60 @:128 B@:128
Send: N69 M10524
Recv: ok T:189 /200 B:57 /60 @:128 B@:128
Send: N70 M10516
Recv: ok T:190 /200 B:58 /60 @:0 B@:128
Send: N71 M10517
Recv: ok T:190 /200 B:58 /60 @:0 B@:128
Send: N72 M10518
Recv: ok T:186 /200 B:58 /60 @:128 B@:128
Changing monitoring state from "Operational" to "Starting"
Send: N0 M110 N0125
Recv: ok N:0
Send: N1 G2127
Recv: ok N:1
Send: N2 G9018
Recv: ok N:2
Send: N3 M140 S6080
Recv: ok N:3
Send: N4 M8229
Recv: ok N:4
Send: N5 M10732
Recv: ok N:5
Send: N6 G28 X0 Y020
Recv: wait
Send: N7 G28 Z094
Recv: wait
Send: N8 G2926
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}38
Recv: wait
Send: N10 G92 E0118
Recv: wait
Send: N11 M10523
Recv: wait
Send: N12 G1 F200 E3041
Recv: wait
Send: N13 M10521
Recv: wait
Send: N14 G92 E0114
Recv: wait
Send: N15 G1 F {travel_speed}124
Recv: wait
Send: N16 M10516
Recv: ok N:6
Send: N17 M117 Imprimiendo121
Recv: Resend:7
Recv: //last:6 curr:16 rcv:N16 M10516
Recv:
Recv: //callback_pf error
Send: N7 G28 Z094
Recv: Resend:7
Recv: //last:6 curr:17 rcv:N17 M117 Imprimiendo
Send: N7 G28 Z094
Recv: //callback_pf error
Recv: wait
Send: N8 G2926
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}38
Recv: wait
Send: N10 G92 E0118
Recv: ok N:7
Recv: Resend:8
Send: N11 M10523
Recv: //last:7 curr:10 rcv:N10 G92 E0118
Send: N8 G2926
Recv:
Recv: //callback_pf error
Recv: Resend:8
Recv: //last:7 curr:11 rcv:N11 M10523
Send: N8 G2926
Recv:
Recv: //callback_pf error
Recv: wait
Send: N9 G1 Z30.0 F {travel_speed}38
Recv: wait
Send: N10 G92 E0118
Recv: wait
Send: N11 M10523
Recv: wait
Send: N12 G1 F200 E3041
Recv: wait
Send: N13 M10521
Recv: wait
Send: N14 G92 E0114
Recv: wait
Send: N15 G1 F {travel_speed}124
Recv: wait
Send: N16 M10516
Recv: wait
Send: N17 M117 Imprimiendo121
Recv: wait
Send: N18 M10530
Recv: wait
Changing monitoring state from "Starting" to "Printing"
Send: N19 G9040
Recv: wait
Send: N20 M10521
Recv: wait
Send: N21 M8242
Recv: wait
Send: N22 M10523
Recv: wait
Send: N23 M106 S086
Recv: wait
Send: N24 M140 S60101
Recv: wait
Send: N25 M10516
Recv: wait
Send: N26 M190 S60106
Recv: wait
Send: N27 M104 S220 T020
Recv: wait
Send: N28 M109 S220 T022
Recv: wait
Send: Start:
Send: N29 G2133
Recv: wait
Send: N30 M10520
Recv: wait
Send: N31 G9034
Recv: wait
Send: N32 M10522
Recv: ok N:8
Recv: Resend:9
Send: N33 M140 S6099
Recv: //last:8 curr:32 rcv:N32 M105*22
Send: N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //callback_pf error
Recv: Resend:9
Recv: //last:8 curr:33 rcv:N33 M140 S6099
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //sd cmd error cnt:1 len:32 :N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: ok
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Send: N10 G92 E0118
Recv: //sd cmd error cnt:2 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:3 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:4 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:5 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Recv:
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:6 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:7 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}*38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:8 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Recv:
Send: N9 G1 Z30.0 F {travel_speed}38
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:9 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Recv: //last:8 curr:10 rcv:N10 G92 E0118
Send: N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //callback_pf error
Recv: //Contain Unknown opts:N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: //sd cmd error cnt:10 len:32 :N9 G1 Z30.0 F {travel_speed}38
Recv:
Recv: ok
Send: N10 G92 E0118
Recv: Resend:9
Printer keeps requesting line 9 again and again, communication stuck
Changing monitoring state from "Printing" to "Error: Printer keeps requesting line 9 again and again, communication stuck"
Send: M112
Send: N34 M11222
Send: N35 M104 T0 S023
Send: N36 M140 S080
Changing monitoring state from "Error: Printer keeps requesting line 9 again and again, communication stuck" to "Offline (Error: Printer keeps requesting line 9 again and again, communication stuck)"
Connection closed, closing down monitor

Matias_Suarez · January 4, 2020, 2:15pm

serial 4012020 (2).log (44.7 KB)

adjunto el log

Matias_Suarez · January 4, 2020, 2:28pm

Start:

G21; metric values

G90;

M140 S60; start bed warming to 50 degrees C.

M82; set extruder to absolute mode

M107; start with the fan off

G28 X0 Y0; move X / Y to min endstops

G28 Z0; move Z to min endstops

G29; autolvl

G1 Z30.0 F {speedl_travel}; move the nozzle up 30mm

G92 E0; zero the extruded length

G1 F200 E30; extrude 30mm of feed stock the amount retracted at end

G92 E0; zero the extruded length again

G1 F {speed_travel}; Putting message on LCD screen

M117 Imprimiendo

end gcode
M104 S0

M140 S0 ;heated bed heater off (if you have it)

G91 ;relative positioning

G1 E-1 F300 ;retract the filament a bit before lifting the nozzle

to release some of the pressure

G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more

G28 X0 Y0 ;move X/Y to min endstops

so the head is out of the way

G1 Y150 F5000 ;move completed part out

M84 ;steppers off

G90 ;absolute positioning

PrintedWeezl · January 8, 2020, 12:54am

This might help

Matias_Suarez · January 11, 2020, 12:31am

it is giving me a mistake
State: Offline (Error: Printer keeps requesting line 9 again and again, communication stuck)
For me, the gcode must be the same:

Now I change the travel speed for the speed travel I try and tell them what happened.

G21; metric values
G90;
M140 S60; start bed warming to 50 degrees C.
M82; set extruder to absolute mode
M107; start with the fan off
G28 X0 Y0; move X / Y to min endstops
G28 Z0; move Z to min endstops
G29; autolvl
G1 Z30.0 F {speed_travel}; move the nozzle up 30mm
G92 E0; zero the extruded length
G1 F200 E30; extrude 30mm of feed stock the amount retracted at end
G92 E0; zero the extruded length again
G1 F {speed_travel}; Putting message on LCD screen
M117 Printing

Matias_Suarez · January 11, 2020, 2:22pm

I finally deleted the gcode that was put in the octoprint, it started to print well but it makes me some pauses in the printing every so often.