What is the problem?
Raspicam is connected but webcam shows "Webcam is Loading". Snapshot URL fails when testing
What did you already try to solve it?
Attempted troubleshooting based on some items found on the forum but have had no results. See logs below
Additional information about your setup (OctoPrint version, OctoPi version, printer, firmware, octoprint.log, serial.log or output on terminal tab, ...)
Latest from "nano /var/log/webcamd.log"
<13>Jan 14 00:02:05 pi: Starting Raspberry Pi camera
Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_raspicam.$
MJPG Streamer Version: git rev: 821c330ea6bbb5fbed98d48e00aac156e923161b
i: fps.............: 10
i: resolution........: 640 x 480
i: camera parameters..............:
Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
o: www-folder-path......: ./www-octopi/
o: HTTP TCP port........: 8080
o: HTTP Listen Address..: (null)
o: username:password....: disabled
o: commands.............: disabled
i: Starting Camera
Encoder Buffer Size 81920
Output of " vcgencmd get_camera":
supported=1 detected=1
Octoprint settings:
Octoprint Version: 1.3.10
Octopi Version: Version 0.15.1, running on Raspberry Pi 2 Model B Rev 1.1
Pi Cam Rev 1.3 5mp camera (official)
Boot/octopi.txt file:
octopi.txt.log (2.6 KB)