Camera model
Arducam IMX519
What is the problem?
It shows up with libcamera-hello --list-cameras
What did you already try to solve it?
I have reflashed the OctoPi image many times, made sure it's the correct one with the new camera stack, I have read endless forums, I have tried all the steps from the Arducam WIKI, including 'Solution On Octoprint,' tried different cables, tried installing Motion (didn't work)
Have you tried running in safe mode?
Yes
Did running in safe mode solve the problem?
No
Systeminfo Bundle
You can download this in OctoPrint's System Information dialog ... no bundle, no support!)
browser.user_agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36 Edg/140.0.0.0
connectivity.connection_check: 1.1.1.1:53
connectivity.connection_ok: True
connectivity.enabled: True
connectivity.online: True
connectivity.resolution_check: octoprint.org
connectivity.resolution_ok: True
env.hardware.cores: 4
env.hardware.freq: 1000.0
env.hardware.ram: 380944384
env.os.bits: 32
env.os.id: linux
env.os.platform: Linux-6.1.21-v7+-armv7l-with-glibc2.31
env.plugins.pi_support.model: Raspberry Pi Zero 2 W Rev 1.0
env.plugins.pi_support.octopi_camera_stack: camera-streamer
env.plugins.pi_support.octopi_version: 1.0.0
env.plugins.pi_support.octopiuptodate_build: 1.0.0-1.11.0-20250422120926
env.plugins.pi_support.octopiuptodate_build_short: 2025.04.22.120926
env.plugins.pi_support.throttle_check_enabled: True
env.plugins.pi_support.throttle_check_functional: True
env.plugins.pi_support.throttle_state: 0x0
env.python.pip: 22.3
env.python.version: 3.9.2
env.python.virtualenv: True
octoprint.last_safe_mode.date: unknown
octoprint.last_safe_mode.reason: unknown
octoprint.safe_mode: False
octoprint.version: 1.11.2
printer.firmware: Marlin bugfix-2.1.x-mfs (Sep 7 2025 10:26:56)
systeminfo.generated: 2025-09-07T17:41:44Z
systeminfo.generator: zipapi
WRITE HERE
Additional information about your setup
OctoPrint Version 1.11.2, Raspberry Pi Zero 2 W
I provided as much information as I can think of. I can see the camera when issuing libcamera-hello --list-cameras, but for some reason no matter what I do I cannot get the control stream to work in OctoPrint. I have tried to change ports in the url, etc., and nothing ever works. I previously had an OV5647 that worked fine, but I was not happy with the image quality so I upgraded to this. I actually tried an IMX219 NOIR before this and it wouldn't even show that one in the list of cameras at all, I'm not sure if that helps or not. Any help would be so greatly appreciated, I have been at this for 3 days straight with no luck at all. I am VERY new at this, so please explain to me like I've never done it before lol. I tried to paste my journalctl, but it said I exceeded the character limit. I can provide it if needed