What is the problem?
Z-offset option does not place nozzle in correct place.
What did you already try to solve it?
Direct access to OctoPrint will do proper z-offset but OctoScreen touch screen does not. I've looked in the setup and can't find where this is control separately from OctoPrint. Did restart of Klipper which I'm using, OctoPrint, Firmware and OctoScreen but it makes no differences.
Have you tried running in safe mode and if so did it solve the issue?
No. I don't even know how to work in save mode.
Complete Logs
Here is my log after pressing the z-offset button in OctoScreen:
Stats 1491.4: gcodein=1651 mcu: mcu_awake=0.010 mcu_task_avg=0.000095 mcu_task_stddev=0.000076 bytes_write=55896 bytes_read=184144 bytes_retransmit=9 bytes_invalid=8 send_seq=4746 receive_seq=4746 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1476.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.02 cputime=8.123 memavail=3535536
Stats 1492.4: gcodein=1651 mcu: mcu_awake=0.010 mcu_task_avg=0.000095 mcu_task_stddev=0.000076 bytes_write=55902 bytes_read=184258 bytes_retransmit=9 bytes_invalid=8 send_seq=4747 receive_seq=4747 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1476.314 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.02 cputime=8.130 memavail=3535544
Stats 1493.4: gcodein=1651 mcu: mcu_awake=0.010 mcu_task_avg=0.000095 mcu_task_stddev=0.000076 bytes_write=56315 bytes_read=184497 bytes_retransmit=9 bytes_invalid=8 send_seq=4771 receive_seq=4771 retransmit_seq=2 srtt=0.009 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1477.118 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.155 memavail=3535552
Stats 1494.4: gcodein=1651 mcu: mcu_awake=0.010 mcu_task_avg=0.000095 mcu_task_stddev=0.000076 bytes_write=56656 bytes_read=184744 bytes_retransmit=9 bytes_invalid=8 send_seq=4794 receive_seq=4794 retransmit_seq=2 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1478.061 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.183 memavail=3535552
Stats 1495.4: gcodein=1651 mcu: mcu_awake=0.021 mcu_task_avg=0.000123 mcu_task_stddev=0.000102 bytes_write=57723 bytes_read=185084 bytes_retransmit=9 bytes_invalid=8 send_seq=4830 receive_seq=4830 retransmit_seq=2 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=26 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=4.256 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.221 memavail=3535552
Stats 1496.4: gcodein=1651 mcu: mcu_awake=0.021 mcu_task_avg=0.000123 mcu_task_stddev=0.000102 bytes_write=57729 bytes_read=185184 bytes_retransmit=9 bytes_invalid=8 send_seq=4831 receive_seq=4831 retransmit_seq=2 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=26 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=3.256 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.228 memavail=3535552
Stats 1497.4: gcodein=1651 mcu: mcu_awake=0.021 mcu_task_avg=0.000123 mcu_task_stddev=0.000102 bytes_write=57791 bytes_read=185318 bytes_retransmit=9 bytes_invalid=8 send_seq=4836 receive_seq=4836 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=26 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=2.255 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.235 memavail=3535552
Stats 1498.4: gcodein=1651 mcu: mcu_awake=0.021 mcu_task_avg=0.000123 mcu_task_stddev=0.000102 bytes_write=57797 bytes_read=185432 bytes_retransmit=9 bytes_invalid=8 send_seq=4837 receive_seq=4837 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=26 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=1.255 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.242 memavail=3535552
Stats 1499.4: gcodein=1651 mcu: mcu_awake=0.021 mcu_task_avg=0.000123 mcu_task_stddev=0.000102 bytes_write=57859 bytes_read=185552 bytes_retransmit=9 bytes_invalid=8 send_seq=4842 receive_seq=4842 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=26 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=0.255 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.249 memavail=3535552
Stats 1500.4: gcodein=1651 mcu: mcu_awake=0.016 mcu_task_avg=0.000134 mcu_task_stddev=0.000134 bytes_write=57906 bytes_read=185696 bytes_retransmit=9 bytes_invalid=8 send_seq=4846 receive_seq=4846 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1483.159 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.257 memavail=3535552
Stats 1501.4: gcodein=1651 mcu: mcu_awake=0.016 mcu_task_avg=0.000134 mcu_task_stddev=0.000134 bytes_write=58058 bytes_read=185878 bytes_retransmit=9 bytes_invalid=8 send_seq=4857 receive_seq=4857 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1485.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.266 memavail=3535552
Stats 1502.4: gcodein=1651 mcu: mcu_awake=0.016 mcu_task_avg=0.000134 mcu_task_stddev=0.000134 bytes_write=58357 bytes_read=186078 bytes_retransmit=9 bytes_invalid=8 send_seq=4878 receive_seq=4878 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999673 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1486.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.285 memavail=3535552
Stats 1503.4: gcodein=1651 mcu: mcu_awake=0.016 mcu_task_avg=0.000134 mcu_task_stddev=0.000134 bytes_write=58666 bytes_read=186326 bytes_retransmit=9 bytes_invalid=8 send_seq=4904 receive_seq=4904 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1487.090 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000 sysload=1.01 cputime=8.299 memavail=3535552
Stats 1504.4: gcodein=1651 mcu: mcu_awake=0.016 mcu_task_avg=0.000134 mcu_task_stddev=0.000134 bytes_write=58868 bytes_read=186488 bytes_retransmit=9 bytes_invalid=8 send_seq=4911 receive_seq=4911 retransmit_seq=2 srtt=0.012 rttvar=0.004 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1488.239 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.314 memavail=3535552
Stats 1505.4: gcodein=1651 mcu: mcu_awake=0.020 mcu_task_avg=0.000113 mcu_task_stddev=0.000080 bytes_write=59170 bytes_read=186708 bytes_retransmit=9 bytes_invalid=8 send_seq=4933 receive_seq=4933 retransmit_seq=2 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1489.089 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.327 memavail=3535560
Stats 1506.4: gcodein=1651 mcu: mcu_awake=0.020 mcu_task_avg=0.000113 mcu_task_stddev=0.000080 bytes_write=59423 bytes_read=186936 bytes_retransmit=9 bytes_invalid=8 send_seq=4955 receive_seq=4955 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1490.089 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.346 memavail=3535560
Stats 1507.4: gcodein=1651 mcu: mcu_awake=0.020 mcu_task_avg=0.000113 mcu_task_stddev=0.000080 bytes_write=59640 bytes_read=187157 bytes_retransmit=9 bytes_invalid=8 send_seq=4972 receive_seq=4972 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1490.528 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.357 memavail=3535552
Unknown command:"T0"
Stats 1508.4: gcodein=1717 mcu: mcu_awake=0.020 mcu_task_avg=0.000113 mcu_task_stddev=0.000080 bytes_write=60320 bytes_read=187340 bytes_retransmit=9 bytes_invalid=8 send_seq=4986 receive_seq=4986 retransmit_seq=2 srtt=0.012 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999676 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1495.192 buffer_time=3.283 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.389 memavail=3535560
Stats 1509.4: gcodein=1717 mcu: mcu_awake=0.020 mcu_task_avg=0.000113 mcu_task_stddev=0.000080 bytes_write=60382 bytes_read=187474 bytes_retransmit=9 bytes_invalid=8 send_seq=4991 receive_seq=4991 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1495.192 buffer_time=2.283 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.395 memavail=3535560
Stats 1510.4: gcodein=1761 mcu: mcu_awake=0.020 mcu_task_avg=0.000120 mcu_task_stddev=0.000118 bytes_write=60388 bytes_read=187603 bytes_retransmit=9 bytes_invalid=8 send_seq=4992 receive_seq=4992 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1495.192 buffer_time=1.282 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.403 memavail=3535560
Stats 1511.4: gcodein=1761 mcu: mcu_awake=0.020 mcu_task_avg=0.000120 mcu_task_stddev=0.000118 bytes_write=60803 bytes_read=187748 bytes_retransmit=9 bytes_invalid=8 send_seq=5002 receive_seq=5002 retransmit_seq=2 srtt=0.009 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=1.835 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.409 memavail=3535560
Stats 1512.4: gcodein=1761 mcu: mcu_awake=0.020 mcu_task_avg=0.000120 mcu_task_stddev=0.000118 bytes_write=60809 bytes_read=187862 bytes_retransmit=9 bytes_invalid=8 send_seq=5003 receive_seq=5003 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.834 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.01 cputime=8.414 memavail=3535560
Stats 1513.4: gcodein=1766 mcu: mcu_awake=0.020 mcu_task_avg=0.000120 mcu_task_stddev=0.000118 bytes_write=60871 bytes_read=187996 bytes_retransmit=9 bytes_invalid=8 send_seq=5008 receive_seq=5008 retransmit_seq=2 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.09 cputime=8.419 memavail=3535584
Stats 1514.4: gcodein=1766 mcu: mcu_awake=0.020 mcu_task_avg=0.000120 mcu_task_stddev=0.000118 bytes_write=60877 bytes_read=188096 bytes_retransmit=9 bytes_invalid=8 send_seq=5009 receive_seq=5009 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999675 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.09 cputime=8.425 memavail=3535584
Stats 1515.4: gcodein=1766 mcu: mcu_awake=0.015 mcu_task_avg=0.000135 mcu_task_stddev=0.000156 bytes_write=60939 bytes_read=188245 bytes_retransmit=9 bytes_invalid=8 send_seq=5014 receive_seq=5014 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.09 cputime=8.430 memavail=3535584
Stats 1516.4: gcodein=1766 mcu: mcu_awake=0.015 mcu_task_avg=0.000135 mcu_task_stddev=0.000156 bytes_write=60945 bytes_read=188359 bytes_retransmit=9 bytes_invalid=8 send_seq=5015 receive_seq=5015 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.09 cputime=8.435 memavail=3535584
Stats 1517.4: gcodein=1766 mcu: mcu_awake=0.015 mcu_task_avg=0.000135 mcu_task_stddev=0.000156 bytes_write=61007 bytes_read=188479 bytes_retransmit=9 bytes_invalid=8 send_seq=5020 receive_seq=5020 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15999674 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.09 cputime=8.440 memavail=3535584
Stats 1518.4: gcodein=1771 mcu: mcu_awake=0.015 mcu_task_avg=0.000135 mcu_task_stddev=0.000156 bytes_write=61013 bytes_read=188593 bytes_retransmit=9 bytes_invalid=8 send_seq=5021 receive_seq=5021 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999673 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.446 memavail=3535592
Stats 1519.4: gcodein=1771 mcu: mcu_awake=0.015 mcu_task_avg=0.000135 mcu_task_stddev=0.000156 bytes_write=61075 bytes_read=188727 bytes_retransmit=9 bytes_invalid=8 send_seq=5026 receive_seq=5026 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999673 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.450 memavail=3535592
Stats 1520.4: gcodein=1771 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61081 bytes_read=188841 bytes_retransmit=9 bytes_invalid=8 send_seq=5027 receive_seq=5027 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999673 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.455 memavail=3535468
Stats 1521.4: gcodein=1771 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61143 bytes_read=188975 bytes_retransmit=9 bytes_invalid=8 send_seq=5032 receive_seq=5032 retransmit_seq=2 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.460 memavail=3535468
Stats 1522.4: gcodein=1771 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61149 bytes_read=189089 bytes_retransmit=9 bytes_invalid=8 send_seq=5033 receive_seq=5033 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999672 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.464 memavail=3535468
Stats 1523.4: gcodein=1776 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61211 bytes_read=189209 bytes_retransmit=9 bytes_invalid=8 send_seq=5038 receive_seq=5038 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.469 memavail=3535476
Stats 1524.4: gcodein=1776 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61217 bytes_read=189323 bytes_retransmit=9 bytes_invalid=8 send_seq=5039 receive_seq=5039 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.474 memavail=3535476
Stats 1525.4: gcodein=1776 mcu: mcu_awake=0.009 mcu_task_avg=0.000095 mcu_task_stddev=0.000075 bytes_write=61279 bytes_read=189457 bytes_retransmit=9 bytes_invalid=8 send_seq=5044 receive_seq=5044 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.479 memavail=3535476
Stats 1526.4: gcodein=1776 mcu: mcu_awake=0.010 mcu_task_avg=0.000098 mcu_task_stddev=0.000075 bytes_write=61285 bytes_read=189571 bytes_retransmit=9 bytes_invalid=8 send_seq=5045 receive_seq=5045 retransmit_seq=2 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999671 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.484 memavail=3535476
Stats 1527.4: gcodein=1776 mcu: mcu_awake=0.010 mcu_task_avg=0.000098 mcu_task_stddev=0.000075 bytes_write=61347 bytes_read=189705 bytes_retransmit=9 bytes_invalid=8 send_seq=5050 receive_seq=5050 retransmit_seq=2 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.08 cputime=8.489 memavail=3535476
Stats 1528.4: gcodein=1781 mcu: mcu_awake=0.010 mcu_task_avg=0.000098 mcu_task_stddev=0.000075 bytes_write=61353 bytes_read=189819 bytes_retransmit=9 bytes_invalid=8 send_seq=5051 receive_seq=5051 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.07 cputime=8.495 memavail=3535484
Stats 1529.4: gcodein=1781 mcu: mcu_awake=0.010 mcu_task_avg=0.000098 mcu_task_stddev=0.000075 bytes_write=61415 bytes_read=189939 bytes_retransmit=9 bytes_invalid=8 send_seq=5056 receive_seq=5056 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.07 cputime=8.499 memavail=3535484
Stats 1530.4: gcodein=1781 mcu: mcu_awake=0.010 mcu_task_avg=0.000098 mcu_task_stddev=0.000075 bytes_write=61421 bytes_read=190053 bytes_retransmit=9 bytes_invalid=8 send_seq=5057 receive_seq=5057 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.07 cputime=8.504 memavail=3535484
Stats 1531.4: gcodein=1781 mcu: mcu_awake=0.009 mcu_task_avg=0.000096 mcu_task_stddev=0.000076 bytes_write=61483 bytes_read=190201 bytes_retransmit=9 bytes_invalid=8 send_seq=5062 receive_seq=5062 retransmit_seq=2 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.07 cputime=8.509 memavail=3535484
Stats 1532.4: gcodein=1781 mcu: mcu_awake=0.009 mcu_task_avg=0.000096 mcu_task_stddev=0.000076 bytes_write=61489 bytes_read=190301 bytes_retransmit=9 bytes_invalid=8 send_seq=5063 receive_seq=5063 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999670 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.07 cputime=8.514 memavail=3535496
Stats 1533.4: gcodein=1786 mcu: mcu_awake=0.009 mcu_task_avg=0.000096 mcu_task_stddev=0.000076 bytes_write=61551 bytes_read=190435 bytes_retransmit=9 bytes_invalid=8 send_seq=5068 receive_seq=5068 retransmit_seq=2 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15999669 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.06 cputime=8.519 memavail=3535488
Stats 1534.4: gcodein=1786 mcu: mcu_awake=0.009 mcu_task_avg=0.000096 mcu_task_stddev=0.000076 bytes_write=61557 bytes_read=190549 bytes_retransmit=9 bytes_invalid=8 send_seq=5069 receive_seq=5069 retransmit_seq=2 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999669 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.06 cputime=8.524 memavail=3535000
Stats 1535.4: gcodein=1786 mcu: mcu_awake=0.009 mcu_task_avg=0.000096 mcu_task_stddev=0.000076 bytes_write=61619 bytes_read=190669 bytes_retransmit=9 bytes_invalid=8 send_seq=5074 receive_seq=5074 retransmit_seq=2 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15999669 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.06 cputime=8.528 memavail=3534992
Stats 1536.4: gcodein=1786 mcu: mcu_awake=0.010 mcu_task_avg=0.000097 mcu_task_stddev=0.000075 bytes_write=61625 bytes_read=190797 bytes_retransmit=9 bytes_invalid=8 send_seq=5075 receive_seq=5075 retransmit_seq=2 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15999669 heater_bed: target=0 temp=24.5 pwm=0.000 print_time=1496.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000 sysload=1.06 cputime=8.534 memavail=3534992
WRITE HERE
This worked once but not since.
WRITE HERE