Aquila PRO unable to connect to octoprint

[Maurice_Doerr]

hello specialists.

I can't connect to my Aquila PRO.

I've been testing with 2 different types of cables, I tried the tape on the 5V

I'm not sure what to do.
octoprint-systeminfo-20221215083353.zip (55.8 KB)

[Ewald_Ikemann]

Hello @Maurice_Doerr !

A forum search gave this:

Voxelab Aquila Connection Problems

What is the problem? Voxelab Aquila running on a modified Alex's Firmware randomly (usually only prints 2+ hours) looses connection during prints, both when printing from SD and from OctoPrint. When printing from SD it will continue to completion. When printing from OctoPrint the nozzle just stops and stays at temperature. I can't cancel the print or anything. I have to just flip the switch on the printer. What did you already try to solve it? Covered the 5v, added G0, G1, G2, and G3 to long …

Voxelab Aquila not connecting to Octoprint/Octopi

What is the problem? Octoprint/Octopi unable to connect to my printer. Have a Rasberry Pi 4GB with camera - camera and Pi connects to the the web interface but unable to connect to the printer when Aquila owners are reporting it is supposed to work (Ender 3 v2 clone * am told)* New to Octoprint and Rasberry Pi but pretty computer saavy What did you already try to solve it? Safe mode, change to 3 different USB cables that I know work, reboot multiple occassions, changed settings to known profile…

[Maurice_Doerr]

I have seen that does not answer my problem

[Ewald_Ikemann]

The "lower" USB-port (the type A) is only for USB sticks and won't work with the Pi.

How many cables have you tried for the upper port?

[Maurice_Doerr]

3 différents

We agree that there is nothing to do option levels on the printer (there are no options anyway).

[Maurice_Doerr]

I forgot to mention that the first cable I used was the one I used on my crealty and it passed perfectly.