Can't change pi cam resolution

[SETI]

Camera model Raspberry Pi Cam

What is the problem? the only resolutions that work are 640x480 (no options specified in octopi.txt) and 1920x1080 (Very zoomed in)

If I set any other resolution, I get no picture at http://192.168.1.34/webcam/?action=stream

What did you already try to solve it? following the guide again very closely at V0.4 Configuring a Raspberry Pi Camera · FormerLurker/Octolapse Wiki · GitHub

Logs (/var/log/webcamd.log, syslog, dmesg, ... no logs, no support)

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:46:32 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 154: 19265 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:47:05 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:50:33 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 287:   497 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"  (wd: /home/pi/mjpg-streamer)
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:51:21 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 287:   774 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"  (wd: /home/pi/mjpg-streamer)
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:51:53 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 287:   801 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"  (wd: /home/pi/mjpg-streamer)
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:52:25 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:54:08 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 154:   926 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:54:40 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:57:02 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
/root/bin/webcamd: line 154:  1015 Segmentation fault      LD_LIBRARY_PATH=. ./mjpg_streamer -o "output_http.so -w $camera_ht
tp_webroot $camera_http_options" -i "$input"
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 13:57:34 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        raspi
usb options:   -r 640x480 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':Start MJPG-streamer with video device: raspi
<13>Jan 30 14:31:01 root: Starting Raspberry Pi camera
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_raspicam.so -fps 10
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: fps.............: 10
 i: resolution........: 640 x 480
 i: camera parameters..............:

Sharpness 0, Contrast 0, Brightness 50
Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0
Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none'
Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128
Rotation 0, hflip No, vflip No
ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
 i: Starting Camera
Encoder Buffer Size 81920
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        usb
usb options:   -r 1920x1080 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev
/video0
<13>Jan 30 14:34:06 root: Starting USB webcam
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_uvc.so -r 1920x1080 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 1920 x 1080
 i: Frames Per Second.: 10
 i: Format............: JPEG
 i: TV-Norm...........: DEFAULT
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
Done bring up all configured video device

Goodbye...

Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        usb
usb options:   -r 1640x1232 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev
/video0
<13>Jan 30 14:36:05 root: Starting USB webcam
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_uvc.so -r 1640x1232 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 1640 x 1232
 i: Frames Per Second.: 10
 i: Format............: JPEG
 i: TV-Norm...........: DEFAULT
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
Done bring up all configured video device

Goodbye...

 i: select() timeout
 i: cleaning up resources allocated by input thread
Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        usb
usb options:   -r 2592x1944 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev
/video0
<13>Jan 30 14:42:41 root: Starting USB webcam
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_uvc.so -r 2592x1944 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 2592 x 1944
 i: Frames Per Second.: 10
 i: Format............: JPEG
 i: TV-Norm...........: DEFAULT
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
Done bring up all configured video device

Goodbye...

 i: select() timeout
 i: cleaning up resources allocated by input thread
Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        usb
usb options:   -r 3280x2464 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev
/video0
<13>Jan 30 14:45:52 root: Starting USB webcam
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_uvc.so -r 3280x2464 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 3280 x 2464
 i: Frames Per Second.: 10
 i: Format............: JPEG
 i: TV-Norm...........: DEFAULT
 i: The specified resolution is unavailable, using: width 2592 height 1944 instead 
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
Done bring up all configured video device

Goodbye...

 i: select() timeout
 i: cleaning up resources allocated by input thread
Starting up webcamDaemon...

--- Configuration: ----------------------------
cfg_file:      /boot/octopi.txt
camera:        usb
usb options:   -r 1640x1232 -f 10
raspi options: -fps 10
http options:  -w ./www 

Explicitly USB device: 
-----------------------------------------------

Found video devices:
/dev/video0
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video18
raspi
config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev
/video0
<13>Jan 30 14:48:02 root: Starting USB webcam
Checking for VL805 (Raspberry Pi 4)...
  - It seems that you don't have VL805 (Raspberry Pi 4).
    There should be no problems with USB (a.k.a. select() timeout)
Running ./mjpg_streamer -o output_http.so -w ./www  -i input_uvc.so -r 1640x1232 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34
 i: Using V4L2 device.: /dev/video0
 i: Desired Resolution: 1640 x 1232
 i: Frames Per Second.: 10
 i: Format............: JPEG
 i: TV-Norm...........: DEFAULT
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
 o: www-folder-path......: ./www/
 o: HTTP TCP port........: 8080
 o: HTTP Listen Address..: (null)
 o: username:password....: disabled
 o: commands.............: enabled
Done bring up all configured video device

Goodbye...

 i: select() timeout
 i: cleaning up resources allocated by input thread

Additional information about your setup (OctoPrint version, OctoPi version, ...)

OctoPrint version : 1.7.3
OctoPi version : 0.18.0

[SETI]

scroll to the bottom of the logs, it includes many attempts.

What are the supported modes? I've tried different modes as suggested here:

https://picamera.readthedocs.io/en/release-1.12/fov.html

camera_usb_options="-r 2592x1944 -f 10" NO PICTURE

camera_usb_options="-r 1920x1080 -f 10" SMALL FOV

camera_usb_options="-r 3280x2464 -f 10" NO PICTURE

I'm not sure if my camera is V1 or V2 (Don't know how to tell?) but I've tried modes for both models and neither seem to work.

[TTalkington]

@SETI

I'm not sure if my camera is V1 or V2 (Don't know how to tell?)

It's printed on the camera's board itself if it's an official one:

What does 1296x972 do?

@SETI

What are the supported modes?

You can run v4l2-ctl --list-formats-ext, but since a picam supports scaling it's not going to give you a discrete list, instead it's just going to list the min - max. For example, my v1.x cam:

taylor@printerpi:~ $ v4l2-ctl --list-formats-ext -d2
ioctl: VIDIOC_ENUM_FMT
	Type: Video Capture

	[0]: 'YU12' (Planar YUV 4:2:0)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
	[1]: 'YUYV' (YUYV 4:2:2)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
	[2]: 'RGB3' (24-bit RGB 8-8-8)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
	[3]: 'JPEG' (JFIF JPEG, compressed)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
	[4]: 'H264' (H.264, compressed)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
	[5]: 'MJPG' (Motion-JPEG, compressed)
		Size: Stepwise 32x32 - 2592x1944 with step 2/2
...

[SETI]

1296x972 seems to work. I never tried that one! Is that the highest I can go, you think?

I don't think my cameras are official pi ones, I don't remember seeing the raspberry graphic. My printer is printing right now and I need to disassemble the camera arm to see the PCB, but I'll check it later. Is there no way to see the model in software?

Here's the output of that other command

ioctl: VIDIOC_ENUM_FMT
Type: Video Capture

[0]: 'YU12' (Planar YUV 4:2:0)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[1]: 'YUYV' (YUYV 4:2:2)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[2]: 'RGB3' (24-bit RGB 8-8-8)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[3]: 'JPEG' (JFIF JPEG, compressed)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[4]: 'H264' (H.264, compressed)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[5]: 'MJPG' (Motion-JPEG, compressed)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[6]: 'YVYU' (YVYU 4:2:2)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[7]: 'VYUY' (VYUY 4:2:2)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[8]: 'UYVY' (UYVY 4:2:2)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[9]: 'NV12' (Y/CbCr 4:2:0)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[10]: 'BGR3' (24-bit BGR 8-8-8)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[11]: 'YV12' (Planar YVU 4:2:0)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[12]: 'NV21' (Y/CrCb 4:2:0)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2
[13]: 'RX24' (32-bit XBGR 8-8-8-8)
	Size: Stepwise 32x32 - 2592x1944 with step 2/2

[TTalkington]

That looks like it's a v1.x clone then.

If you want higher resolutions, give this a try: OctoPrint-CameraSettings/setup.md at a7e444f5f827c32e62e05a52a15c0745474693ca · The-EG/OctoPrint-CameraSettings · GitHub

[SETI]

Hmmm, I set the max res as per the doc but still no dice. Should I be prescriptively following the modes listed in the next link, or can I choose my own?

https://picamera.readthedocs.io/en/release-1.12/fov.html

I tried camera_usb_options="-r 2592x1944 -f 10" but I get no picture after a reboot. I've put it back to 1296x972