ImportError: cannot import name 'ParamSpec' from 'typing_extensions' after upgrade to 1.8.3+

Mechnut450 · September 20, 2022, 2:56pm

I upgraded the pi this morning ( it a 3b model) and now it says no running. I am looking at the octodash set up screen on the display.) I restarted it several times and even done a long off then start same issue. ( I am not ver good at programing part ( not like i use to be back in windows 98 era lol) i have the card sitting in the card reader for my pc and just need to figure out what i need to fix it lol.
here what browser says..

The OctoPrint server is currently not running

If you just started up your Raspberry Pi, please wait a couple of seconds, then try to refresh this page.

If the issue persists, please log into your Raspberry Pi via SSH and check the following:

Verify that the process is running: ps -ef | grep -i octoprint | grep -i python should show a python process:

pi@octopi:~ $ ps -ef | grep -i octoprint | grep -i python
pi 1441 1 6 11:12 ? 00:00:15 /home/pi/oprint/bin/python
/home/pi/oprint/bin/octoprint --host=127.0.0.1 --port=5000

If it isn't, the question is why. Take a look into ~/.octoprint/logs/octoprint.log, there might be an error logged in there that helps to determine what's wrong.
You might also want to try if you can restart the server (if no obvious error is visible): sudo service octoprint restart.

If all that doesn't help to trouble shoot the issue, you can seek support on the OctoPrint Community Forum. Please provide your OctoPi and OctoPrint versions as well as your octoprint.log and explain what you already tried and observed as detailed as possible.

jneilliii · September 20, 2022, 3:43pm

Please follow the directions provided, it's not programming just command lines to run via a SSH connection to the pi.

jeffproe · September 20, 2022, 3:48pm

Same issue, similar hardware. Here's my log:

2022-09-20 11:39:51,689 - octoprint.cli.server - ERROR - Uncaught exception
Traceback (most recent call last):
  File "/home/pi/oprint/bin/octoprint", line 8, in <module>
    sys.exit(main())
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/__init__.py", line 936, in main
    octo(args=args, prog_name="octoprint", auto_envvar_prefix="OCTOPRINT")
  File "/home/pi/oprint/lib/python3.7/site-packages/click/core.py", line 1130, in __call__
    return self.main(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/click/core.py", line 1055, in main
    rv = self.invoke(ctx)
  File "/home/pi/oprint/lib/python3.7/site-packages/click/core.py", line 1657, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
  File "/home/pi/oprint/lib/python3.7/site-packages/click/core.py", line 1404, in invoke
    return ctx.invoke(self.callback, **ctx.params)
  File "/home/pi/oprint/lib/python3.7/site-packages/click/core.py", line 760, in invoke
    return __callback(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/click/decorators.py", line 26, in new_func
    return f(get_current_context(), *args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/cli/server.py", line 330, in serve_command
    disable_color=no_color,
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/cli/server.py", line 163, in run_server
    octoprint_server.run()
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/__init__.py", line 371, in run
    self._setup_app(app)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/__init__.py", line 1466, in _setup_app
    from flask_limiter import Limiter
  File "/home/pi/oprint/lib/python3.7/site-packages/flask_limiter/__init__.py", line 4, in <module>
    from .errors import RateLimitExceeded
  File "/home/pi/oprint/lib/python3.7/site-packages/flask_limiter/errors.py", line 6, in <module>
    from .typing import Optional
  File "/home/pi/oprint/lib/python3.7/site-packages/flask_limiter/typing.py", line 14, in <module>
    from typing_extensions import ParamSpec
ImportError: cannot import name 'ParamSpec' from 'typing_extensions' (/home/pi/oprint/lib/python3.7/site-packages/typing_extensions.py)

When trying to look up that ParamSpec error, it may be an issue with the version of Python?

Mechnut450 · September 20, 2022, 3:49pm

I end up using the raspberry image program and made a new image just need to put in my plugin again . not that had many of those. I not even got a program to use the shh commands on this pc.

Charlie_Powell · September 20, 2022, 3:56pm

@jeffproe Thank you for the log output.

Can you please run ~/oprint/bin/pip freeze on your Pi?

I am wondering if there is a conflict with some plugin. I extensively tested these changes on my Pi with Python 3.7.3 and it works OK.

jeffproe · September 20, 2022, 4:00pm

Sure thing!

pi@octopi:~ $ ~/oprint/bin/pip freeze
anyio==2.2.0
argon2-cffi==21.3.0
argon2-cffi-bindings==21.2.0
asyncclick==7.1.2.3
awesome-slugify==1.6.5
Babel==2.8.0
Backup-Scheduler @ https://github.com/jneilliii/OctoPrint-BackupScheduler/archive/0.1.0.zip
blinker==1.4
cachelib==0.2.0
cachetools==4.2.1
certifi==2020.6.20
cffi==1.15.1
chardet==3.0.4
charset-normalizer==2.0.7
click==8.1.3
colorlog==6.6.0
commonmark==0.9.1
Deprecated==1.2.13
DisplayLayerProgress @ https://github.com/OllisGit/OctoPrint-DisplayLayerProgress/releases/latest/download/master.zip
emoji==1.6.1
feedparser==6.0.8
file-read-backwards==2.0.0
filetype==1.0.7
Flask==2.1.2
Flask-Assets==2.0
Flask-Babel==2.0.0
Flask-Limiter==2.6.2
Flask-Login==0.5.0
frozendict==2.3.2
future==0.18.2
google-api-core==1.26.1
google-api-python-client==2.0.2
google-auth==1.27.1
google-auth-httplib2==0.1.0
googleapis-common-protos==1.53.0
httplib2==0.19.0
idna==2.10
ifaddr==0.1.7
immutabledict==2.2.1
importlib-metadata==3.7.0
itsdangerous==2.1.2
Jinja2==3.1.2
limits==2.7.0
Markdown==3.3.7
MarkupSafe==2.1.1
Marlin-EEPROM-editor @ https://github.com/cp2004/OctoPrint-EEPROM-Marlin/archive/3.2.0.zip
mock==4.0.3
netaddr==0.8.0
netifaces==0.11.0
oauth2client==4.1.3
Octolapse @ https://github.com/FormerLurker/Octolapse/archive/v0.4.1.zip
OctoPrint @ https://github.com/OctoPrint/OctoPrint/archive/1.8.3.zip
OctoPrint-Cancelobject @ https://github.com/paukstelis/OctoPrint-Cancelobject/archive/0.4.7.zip
OctoPrint-Dashboard @ https://github.com/j7126/OctoPrint-Dashboard/archive/1.19.8.zip
OctoPrint-FileCheck @ https://github.com/OctoPrint/OctoPrint-FileCheck/archive/2021.2.23.zip
OctoPrint-FileManager @ https://github.com/Salandora/OctoPrint-FileManager/archive/0.1.6.zip
OctoPrint-FirmwareCheck @ https://github.com/OctoPrint/OctoPrint-FirmwareCheck/archive/2021.10.11.zip
OctoPrint-Fullscreen @ https://github.com/BillyBlaze/OctoPrint-FullScreen/archive/0.0.6.zip
OctoPrint-NavbarTemp @ https://github.com/imrahil/OctoPrint-NavbarTemp/archive/0.15.zip
OctoPrint-PiSupport @ https://github.com/OctoPrint/OctoPrint-PiSupport/archive/2022.6.13.zip
OctoPrint-PSUControl @ file:///tmp/tmpyv7uka6r/OctoPrint-PSUControl-master.zip
OctoPrint-PSUControl-TPLink @ file:///tmp/tmps3_kr8ne/OctoPrint-PSUControl-TPLink-master.zip
OctoPrint-RequestSpinner @ https://github.com/OctoPrint/OctoPrint-RequestSpinner/archive/master.zip
Octoprint-Smart-Filament-Sensor @ file:///tmp/tmpdo73e_oy/Octoprint-Smart-Filament-Sensor-master.zip
OctoPrint-Youtube-Timelapse @ file:///tmp/tmp00mtx_me/OctoPrint-Youtube-Timelapse-master.zip
packaging==21.3
paho-mqtt==1.5.0
passlib==1.7.4
pathtools==0.1.2
pathvalidate==2.5.0
Pillow==7.2.0
pkg-resources==0.0.0
pkginfo==1.7.1
protobuf==3.15.6
psutil==5.8.0
pyasn1==0.4.8
pyasn1-modules==0.2.8
pycparser==2.21
Pygments==2.13.0
pylru==1.2.0
pyparsing==2.4.7
pyserial==3.4
python-kasa==0.4.0.dev2
python-periphery==2.3.0
pytz==2020.1
PyYAML==5.4.1
regex==2020.7.14
requests==2.26.0
rich==12.5.1
RPi.GPIO==0.7.0
rsa==4.0
sarge==0.1.6
semantic-version==2.8.5
sentry-sdk==1.5.12
sgmllib3k==1.0.0
six==1.15.0
sniffio==1.2.0
Themeify @ https://github.com/birkbjo/OctoPrint-Themeify/archive/master.zip
Timelapse-Purger @ https://github.com/jneilliii/OctoPrint-TimelapsePurger/archive/0.1.3.zip
tornado==6.1
TouchUI @ https://github.com/BillyBlaze/OctoPrint-TouchUI/archive/0.3.18.zip
typing-extensions==3.7.4.3
Unidecode==0.4.21
uptime==3.0.1
uritemplate==3.0.1
urllib3==1.25.10
watchdog==1.0.2
webassets==2.0
websocket-client==1.3.2
Werkzeug==2.0.3
wrapt==1.13.3
zeroconf==0.33.4
zipp==3.4.0
zipstream-new==1.1.8
zipstream-ng==1.3.4

Let me know how else I can help!

Charlie_Powell · September 20, 2022, 4:04pm

This is the problem dependency, that is causing the error in your startup output.

In my install, I have a much newer version - 4.3.0. So I think that somewhere there must be some code that is depending on an old version and preventing installing the latest.

Can you first ensure pip is up-to-date with pip install -U pip, then try pip install typing-extensions==4.3.0 and see if it reports any conflicts.

For example, you might get a line like this:

package-name 1.2.3 requires typing-extensions<4.0,>=3.7, but you have typing-extensions 4.3.0 which is incompatible.

That might help pinpoint the issue.

jeffproe · September 20, 2022, 4:06pm

That would be in line with my searching... let me see what happens when I try to upgrade it.
Thanks!

jeffproe · September 20, 2022, 4:16pm

That did it! I'm back up and running!

Is there a way to make sure that package gets upgraded?

Charlie_Powell · September 20, 2022, 4:28pm

We could specify a minimum version, although I've done some digging and not sure why it was not upgraded as there is a minimum specified in the dependency-of-a-dependency that needs it.

Could you share the plugin_softwareupdate_console.log file from OctoPrint now you are back in so we might be able to look and see if anything went wrong with the upgrade?

HandyMan · September 20, 2022, 4:56pm

I had the same problem. Re-imaged with Raspberry Pi imager which fixed it, but is a bit of a pain to have to set everything up again.

jeffproe · September 20, 2022, 5:49pm

Here's the log from today:

2022-09-20 10:25:16,803   /home/pi/oprint/bin/python -m pip --disable-pip-version-check install https://github.com/OctoPrint/OctoPrint/archive/1.8.3.zip --no-cache-dir
2022-09-20 10:25:19,841 > Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
2022-09-20 10:25:19,842 > Collecting https://github.com/OctoPrint/OctoPrint/archive/1.8.3.zip
2022-09-20 10:25:20,848 > Downloading https://github.com/OctoPrint/OctoPrint/archive/1.8.3.zip (6.6 MB)
2022-09-20 10:25:29,859 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2021.2.23)
2022-09-20 10:25:29,860 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2021.10.11)
2022-09-20 10:25:29,861 > Requirement already satisfied: OctoPrint-PiSupport>=2022.3.28 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2022.6.13)
2022-09-20 10:25:33,512 > Collecting argon2_cffi<22,>=21.3.0
2022-09-20 10:25:33,513 > Downloading argon2_cffi-21.3.0-py3-none-any.whl (14 kB)
2022-09-20 10:25:33,524 > Requirement already satisfied: cachelib<0.3,>=0.2 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.2.0)
2022-09-20 10:25:33,524 > Requirement already satisfied: Click<9,>=8.0.3 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (8.1.3)
2022-09-20 10:25:33,524 > Requirement already satisfied: colorlog<7,>=6 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (6.6.0)
2022-09-20 10:25:33,525 > Requirement already satisfied: emoji<2,>=1.4.2 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.6.1)
2022-09-20 10:25:33,525 > Requirement already satisfied: feedparser<7,>=6.0.8 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (6.0.8)
2022-09-20 10:25:33,525 > Requirement already satisfied: filetype<2,>=1.0.7 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.0.7)
2022-09-20 10:25:33,526 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.0)
2022-09-20 10:25:33,526 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.0.0)
2022-09-20 10:25:33,526 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.5.0)
2022-09-20 10:25:34,803 > Collecting Flask-Limiter<3,>=2.6
2022-09-20 10:25:34,804 > Downloading Flask_Limiter-2.6.2-py3-none-any.whl (25 kB)
2022-09-20 10:25:36,823 > Requirement already satisfied: flask<2.2,>=2.1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.1.2)
2022-09-20 10:25:36,824 > Requirement already satisfied: frozendict<3,>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.3.2)
2022-09-20 10:25:36,825 > Requirement already satisfied: future<1,>=0.18.2 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.18.2)
2022-09-20 10:25:36,826 > Requirement already satisfied: markdown<4,>=3.2.2 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (3.3.7)
2022-09-20 10:25:36,827 > Requirement already satisfied: netaddr<0.9,>=0.8 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.8.0)
2022-09-20 10:25:36,827 > Requirement already satisfied: netifaces<1,>=0.11 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.11.0)
2022-09-20 10:25:36,827 > Collecting passlib<2,>=1.7.4
2022-09-20 10:25:36,828 > Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB)
2022-09-20 10:25:39,124 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.5.0)
2022-09-20 10:25:39,930 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.7.1)
2022-09-20 10:25:39,931 > Requirement already satisfied: psutil<6,>=5.8 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (5.8.0)
2022-09-20 10:25:39,931 > Requirement already satisfied: pylru<2,>=1.2 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.2.0)
2022-09-20 10:25:39,932 > Requirement already satisfied: pyserial<4,>=3.4 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (3.4)
2022-09-20 10:25:39,933 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (5.4.1)
2022-09-20 10:25:39,934 > Requirement already satisfied: requests<3,>=2.26.0 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.26.0)
2022-09-20 10:25:39,934 > Requirement already satisfied: sarge==0.1.6 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.1.6)
2022-09-20 10:25:39,935 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.8.5)
2022-09-20 10:25:39,936 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.5.12)
2022-09-20 10:25:39,937 > Requirement already satisfied: tornado<7,>=6.0.4 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (6.1)
2022-09-20 10:25:39,938 > Requirement already satisfied: watchdog<2,>=1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.0.2)
2022-09-20 10:25:39,938 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.3.2)
2022-09-20 10:25:39,939 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2.0.3)
2022-09-20 10:25:39,939 > Requirement already satisfied: wrapt<1.14,>=1.13.3 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.13.3)
2022-09-20 10:25:39,940 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.33.4)
2022-09-20 10:25:39,941 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.3.4)
2022-09-20 10:25:39,942 > Requirement already satisfied: blinker<2,>=1.4 in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (1.4)
2022-09-20 10:25:39,942 > Requirement already satisfied: regex in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (2020.7.14)
2022-09-20 10:25:39,943 > Requirement already satisfied: unidecode in /home/pi/oprint/lib/python3.7/site-packages (from OctoPrint==1.8.3) (0.4.21)
2022-09-20 10:25:39,944 > Collecting argon2-cffi-bindings
2022-09-20 10:25:39,944 > Downloading https://www.piwheels.org/simple/argon2-cffi-bindings/argon2_cffi_bindings-21.2.0-cp37-abi3-linux_armv7l.whl (83 kB)
2022-09-20 10:25:40,951 > Requirement already satisfied: typing-extensions; python_version < "3.8" in /home/pi/oprint/lib/python3.7/site-packages (from argon2_cffi<22,>=21.3.0->OctoPrint==1.8.3) (3.7.4.3)
2022-09-20 10:25:40,952 > Requirement already satisfied: importlib-metadata; python_version < "3.8" in /home/pi/oprint/lib/python3.7/site-packages (from Click<9,>=8.0.3->OctoPrint==1.8.3) (3.7.0)
2022-09-20 10:25:40,953 > Requirement already satisfied: sgmllib3k in /home/pi/oprint/lib/python3.7/site-packages (from feedparser<7,>=6.0.8->OctoPrint==1.8.3) (1.0.0)
2022-09-20 10:25:40,954 > Requirement already satisfied: webassets>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from Flask-Assets<3,>=2.0->OctoPrint==1.8.3) (2.0)
2022-09-20 10:25:40,955 > Requirement already satisfied: Babel>=2.3 in /home/pi/oprint/lib/python3.7/site-packages (from Flask-Babel<3,>=2.0->OctoPrint==1.8.3) (2.8.0)
2022-09-20 10:25:40,956 > Requirement already satisfied: Jinja2>=2.5 in /home/pi/oprint/lib/python3.7/site-packages (from Flask-Babel<3,>=2.0->OctoPrint==1.8.3) (3.1.2)
2022-09-20 10:25:40,956 > Requirement already satisfied: pytz in /home/pi/oprint/lib/python3.7/site-packages (from Flask-Babel<3,>=2.0->OctoPrint==1.8.3) (2020.1)
2022-09-20 10:25:42,962 > Collecting rich<13,>=12
2022-09-20 10:25:42,963 > Downloading rich-12.5.1-py3-none-any.whl (235 kB)
2022-09-20 10:25:44,480 > Collecting limits>=2.3
2022-09-20 10:25:44,489 > Downloading limits-2.7.0-py3-none-any.whl (41 kB)
2022-09-20 10:25:44,490 > Requirement already satisfied: itsdangerous>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from flask<2.2,>=2.1->OctoPrint==1.8.3) (2.1.2)
2022-09-20 10:25:44,490 > Requirement already satisfied: idna<4,>=2.5; python_version >= "3" in /home/pi/oprint/lib/python3.7/site-packages (from requests<3,>=2.26.0->OctoPrint==1.8.3) (2.10)
2022-09-20 10:25:44,491 > Requirement already satisfied: charset-normalizer~=2.0.0; python_version >= "3" in /home/pi/oprint/lib/python3.7/site-packages (from requests<3,>=2.26.0->OctoPrint==1.8.3) (2.0.7)
2022-09-20 10:25:44,491 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/pi/oprint/lib/python3.7/site-packages (from requests<3,>=2.26.0->OctoPrint==1.8.3) (1.25.10)
2022-09-20 10:25:44,491 > Requirement already satisfied: certifi>=2017.4.17 in /home/pi/oprint/lib/python3.7/site-packages (from requests<3,>=2.26.0->OctoPrint==1.8.3) (2020.6.20)
2022-09-20 10:25:44,491 > Requirement already satisfied: ifaddr>=0.1.7 in /home/pi/oprint/lib/python3.7/site-packages (from zeroconf<0.34,>=0.33->OctoPrint==1.8.3) (0.1.7)
2022-09-20 10:25:47,848 > Collecting cffi>=1.0.1
2022-09-20 10:25:47,850 > Downloading https://www.piwheels.org/simple/cffi/cffi-1.15.1-cp37-cp37m-linux_armv7l.whl (219 kB)
2022-09-20 10:25:49,223 > Requirement already satisfied: zipp>=0.5 in /home/pi/oprint/lib/python3.7/site-packages (from importlib-metadata; python_version < "3.8"->Click<9,>=8.0.3->OctoPrint==1.8.3) (3.4.0)
2022-09-20 10:25:49,224 > Requirement already satisfied: MarkupSafe>=2.0 in /home/pi/oprint/lib/python3.7/site-packages (from Jinja2>=2.5->Flask-Babel<3,>=2.0->OctoPrint==1.8.3) (2.1.1)
2022-09-20 10:25:49,225 > Collecting commonmark<0.10.0,>=0.9.0
2022-09-20 10:25:49,226 > Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB)
2022-09-20 10:25:50,273 > Collecting pygments<3.0.0,>=2.6.0
2022-09-20 10:25:54,448 > Downloading Pygments-2.13.0-py3-none-any.whl (1.1 MB)
2022-09-20 10:25:57,455 > Collecting packaging<22,>=21
2022-09-20 10:25:57,456 > Downloading packaging-21.3-py3-none-any.whl (40 kB)
2022-09-20 10:25:57,456 > Requirement already satisfied: setuptools in /home/pi/oprint/lib/python3.7/site-packages (from limits>=2.3->Flask-Limiter<3,>=2.6->OctoPrint==1.8.3) (50.3.0)
2022-09-20 10:25:58,461 > Collecting deprecated>=1.2
2022-09-20 10:25:58,462 > Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB)
2022-09-20 10:25:59,467 > Collecting pycparser
2022-09-20 10:25:59,468 > Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB)
2022-09-20 10:25:59,469 > Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/pi/oprint/lib/python3.7/site-packages (from packaging<22,>=21->limits>=2.3->Flask-Limiter<3,>=2.6->OctoPrint==1.8.3) (2.4.7)
2022-09-20 10:25:59,469 > Building wheels for collected packages: OctoPrint
2022-09-20 10:25:59,470 > Building wheel for OctoPrint (setup.py): started
2022-09-20 10:26:10,483 > Building wheel for OctoPrint (setup.py): finished with status 'done'
2022-09-20 10:26:10,483 > Created wheel for OctoPrint: filename=OctoPrint-1.8.3-py2.py3-none-any.whl size=3906580 sha256=86981256fd1081aaf77b4159af3375f4299ccd363a0521dc926cce0da6669a58
2022-09-20 10:26:10,484 > Stored in directory: /tmp/pip-ephem-wheel-cache-d94t5896/wheels/aa/57/95/cb1218885ea3275084562ce1d97f18fd33595fd1eff0eb7587
2022-09-20 10:26:10,484 > Successfully built OctoPrint
2022-09-20 10:26:12,490 > Installing collected packages: pycparser, cffi, argon2-cffi-bindings, argon2-cffi, commonmark, pygments, rich, packaging, deprecated, limits, Flask-Limiter, passlib, OctoPrint
2022-09-20 10:26:18,499 > Attempting uninstall: packaging
2022-09-20 10:26:18,499 > Found existing installation: packaging 20.9
2022-09-20 10:26:18,500 > Uninstalling packaging-20.9:
2022-09-20 10:26:18,501 > Successfully uninstalled packaging-20.9
2022-09-20 10:26:20,754 > Attempting uninstall: OctoPrint
2022-09-20 10:26:20,755 > Found existing installation: OctoPrint 1.8.2
2022-09-20 10:26:21,761 > Uninstalling OctoPrint-1.8.2:
2022-09-20 10:26:21,762 > Successfully uninstalled OctoPrint-1.8.2
2022-09-20 10:26:33,408 ! ERROR: After October 2020 you may experience errors when installing or updating packages. This is because pip will change the way that it resolves dependency conflicts.
2022-09-20 10:26:33,409 ! 
2022-09-20 10:26:33,409 ! We recommend you use --use-feature=2020-resolver to test your packages with the new resolver before it becomes the default.
2022-09-20 10:26:33,410 ! 
2022-09-20 10:26:33,411 ! rich 12.5.1 requires typing-extensions<5.0,>=4.0.0; python_version < "3.9", but you'll have typing-extensions 3.7.4.3 which is incompatible.
2022-09-20 10:26:33,917 > Successfully installed Flask-Limiter-2.6.2 OctoPrint-1.8.3 argon2-cffi-21.3.0 argon2-cffi-bindings-21.2.0 cffi-1.15.1 commonmark-0.9.1 deprecated-1.2.13 limits-2.7.0 packaging-21.3 passlib-1.7.4 pycparser-2.21 pygments-2.13.0 rich-12.5.1

jneilliii · September 20, 2022, 7:59pm

That's what backups are for. You can create a backup prior to upgrading, download that backup just in case, and if you do have to re-image restore the backup during the initial setup wizard. I'd recommend my Backup Scheduler plugin in combination with either my Google Drive Backups plugin or Charlie's OneDrive Backups plugin.

octopus_pie · September 21, 2022, 9:17pm

For what it's worth, I had the same issue on updating to 1.8.3 just now. ~/oprint/bin/pip freeze returned:

many lines, expand to see them all

(Note: I edited github links to break them since I'm newly-registered here and can't post more than 5 links)

aiohttp==3.6.2
argon2-cffi==21.3.0
argon2-cffi-bindings==21.2.0
arrow==0.17.0
async-timeout==3.0.1
attrs==20.2.0
awesome-slugify==1.6.5
Babel==2.8.0
backoff==1.10.0
backports.csv==1.0.7
Bed-Visualizer @ GITHUB/jneilliii/OctoPrint-BedLevelVisualizer/archive/1.1.1.zip
binaryornot==0.4.4
blinker==1.4
bson==0.5.10
cachelib==0.2.0
certifi==2020.6.20
cffi==1.15.1
chardet==3.0.4
charset-normalizer==2.0.10
click==8.1.3
colorlog==6.6.0
colorzero==1.1
commonmark==0.9.1
configparser==5.0.0
Consolidate-Temp-Control @ GITHUB/jneilliii/OctoPrint-ConsolidateTempControl/archive/0.1.9.zip
cookiecutter==1.6.0
Deprecated==1.2.13
discord-webhook==0.9.0
DisplayLayerProgress @ GITHUB/OllisGit/OctoPrint-DisplayLayerProgress/releases/latest/download/master.zip
DryRun @ GITHUB/OllisGit/OctoPrint-DryRun/releases/latest/download/master.zip
emoji==1.6.3
feedparser==6.0.8
file-read-backwards==2.0.0
filetype==1.0.7
Flask==2.1.2
Flask-Assets==2.0
Flask-Babel==2.0.0
Flask-Limiter==2.6.2
Flask-Login==0.5.0
frozendict==2.3.2
future==0.18.2
humanize==2.6.0
idna==2.10
ifaddr==0.1.7
imgurpython==1.1.7
immutabledict==2.2.1
importlib-metadata==4.11.4
itsdangerous==2.1.2
Jinja2==3.1.2
jinja2-time==0.2.0
limits==2.7.0
Markdown==3.3.7
MarkupSafe==2.1.1
matrix-client==0.3.2
minio==6.0.0
multidict==4.7.6
netaddr==0.8.0
netifaces==0.11.0
numpy==1.19.2
Octolapse @ GITHUB/FormerLurker/Octolapse/archive/v0.4.0.zip
OctoPrint @ GITHUB/OctoPrint/OctoPrint/archive/1.8.3.zip
OctoPrint-AutoTerminalInput @ file:///tmp/tmppzuinh2g/OctoPrint-AutoTerminalInput-master.zip
OctoPrint-CameraSettings @ GITHUB/The-EG/OctoPrint-CameraSettings/archive/0.4.0.zip
OctoPrint-Cancelobject @ GITHUB/paukstelis/OctoPrint-Cancelobject/archive/0.4.7.zip
OctoPrint-CustomControlPlugin @ GITHUB/Salandora/octoprint-customControl/archive/master.zip
OctoPrint-ExtraFileInfo @ GITHUB/larsjuhw/OctoPrint-Extrafileinfo/archive/1.3.0.zip
OctoPrint-FileCheck @ GITHUB/OctoPrint/OctoPrint-FileCheck/archive/2021.2.23.zip
OctoPrint-FirmwareCheck @ GITHUB/OctoPrint/OctoPrint-FirmwareCheck/archive/2021.10.11.zip
OctoPrint-FirmwareUpdater @ GITHUB/OctoPrint/OctoPrint-FirmwareUpdater/archive/1.13.3.zip
OctoPrint-MeatPack @ file:///tmp/tmpjelet2qx/OctoPrint-MeatPack-master.zip
OctoPrint-NavbarTemp @ GITHUB/imrahil/OctoPrint-NavbarTemp/archive/master.zip
OctoPrint-Obico @ GITHUB/TheSpaghettiDetective/OctoPrint-Obico/archive/2.1.4.zip
OctoPrint-PiSupport @ GITHUB/OctoPrint/OctoPrint-PiSupport/archive/2022.6.13.zip
OctoPrint-PrintTimeGenius @ GITHUB/eyal0/OctoPrint-PrintTimeGenius/archive/master.zip
OctoPrint-PrusaLevelingGuide @ GITHUB/scottrini/OctoPrint-PrusaLevelingGuide/archive/1.0.17.zip
OctoPrint-SetAndWait @ GITHUB/kantlivelong/OctoPrint-SetAndWait/archive/master.zip
OctoPrint-SimpleEmergencyStop @ file:///tmp/tmpau4ld09i/OctoPrint-SimpleEmergencyStop-master.zip
OctoPrint-SlicerSettingsParser @ GITHUB/Rob4226/OctoPrint-SlicerSettingsParser/archive/master.zip
OctoPrint-SystemCommandEditor @ GITHUB/Salandora/OctoPrint-SystemCommandEditor/archive/master.zip
Octoslack @ GITHUB/fraschetti/Octoslack/archive/2.2.0.zip
packaging==21.3
passlib==1.7.4
pathlib2==2.3.5
pathtools==0.1.2
pathvalidate==2.5.0
peewee==3.13.3
picamerab==1.13b1
Pillow==7.2.0
pkg-resources==0.0.0
pkginfo==1.8.2
poyo==0.5.0
Preheat @ GITHUB/marian42/octoprint-preheat/archive/master.zip
Print-Job-History @ GITHUB/OllisGit/OctoPrint-PrintJobHistory/releases/download/1.17.0/master.zip
PrusaSlicer-Thumbnails @ GITHUB/jneilliii/OctoPrint-PrusaSlicerThumbnails/archive/master.zip
psutil==5.9.0
pushbullet.py==0.11.0
pushover-complete==1.1.1
pyasn1==0.4.8
pycparser==2.21
Pygments==2.13.0
pylru==1.2.0
pymsteams==0.1.14
pyparsing==3.0.9
pyserial==3.5
python-dateutil==2.8.1
python-magic==0.4.18
pytz==2020.1
PyYAML==5.4.1
raven==6.10.0
regex==2020.7.14
requests==2.27.1
rich==12.5.1
rocket-python==1.2.14
rsa==4.0
sarge==0.1.6
semantic-version==2.8.5
sentry-sdk==1.5.12
sgmllib3k==1.0.0
six==1.15.0
slack-sdk==3.5.1
slackclient==2.9.0
slacker==0.14.0
SQLAlchemy==1.1.18
Terminal-Commands-Extended @ GITHUB/jneilliii/OctoPrint-TerminalCommandsExtended/archive/0.1.7.zip
Terminal-Messaging @ GITHUB/jeffeb3/OctoPrint-TerminalMessaging/archive/0.1.0.zip
tinys3==0.1.12
Top-Temp @ GITHUB/LazeMSS/OctoPrint-TopTemp/archive/0.0.1.7.zip
tornado==6.1
tplink-cloud-api==1.0.2
typing-extensions==3.7.4.3
Unidecode==0.4.21
uritools==2.1.1
urllib3==1.25.10
watchdog==1.0.2
webassets==2.0
websocket-client==1.3.2
Werkzeug==2.0.3
whichcraft==0.6.1
wrapt==1.13.3
yarl==1.5.1
zeroconf==0.33.4
zipp==3.8.0
zipstream-new==1.1.8
zipstream-ng==1.3.4

I updated pip with ~/oprint/bin/pip install -U pip and then ran ~/oprint/bin/pip check. It found one problem:

rich 12.5.1 has requirement typing-extensions<5.0,>=4.0.0; python_version < "3.9", but you have typing-extensions 3.7.4.3.

I'm not familiar enough with python to know why typing-extensions wouldn't have been updated if something needed it to be updateed, but I ran ~/oprint/bin/pip install -U typing-extensions, restarted OctoPrint, and it came up fine! Not sure what happened but hopefully this may help someone else, and/or point to a reason for this apparently happening to more than one person.

octopus_pie · September 21, 2022, 9:27pm

Just remembered Charlie's request for the log file. Here's what I found in mine from today - put it up on pastebin due to all the links in the log (can't post them here since I'm newly-registered): https://pastebin.com/raw/DMSWkeTc

Chupa · September 21, 2022, 10:00pm

Same problem here too. Here's my fix

~/oprint/bin/pip install jinja2==3.0 typing-extensions==4.3.0
sudo service octoprint start

Charlie_Powell · September 21, 2022, 10:25pm

To anyone else who may run into this issue (and people who already posted, although many of you updated pip already): What pip version are you running?

@Chupa might be able to help, if you haven't upgraded pip. If anyone else can remember what version they are on that would be wonderful, although I wouldn't expect that

So far from the logs collected, I'm estimating pip is version 20.something. I am wondering if we have encountered a bug with the old pip dependency resolver or similar here, since all the logs we have gathered show the same message about the upcoming 2020 dependency resolver, which was enabled (iirc) in 20.3.

octopus_pie · September 21, 2022, 10:43pm

I upgraded from pip 20.2.3:

pi@octopi:~ $ ~/oprint/bin/pip install -U pip
Looking in indexes: Simple index, piwheels - Simple index
Collecting pip
Downloading pip-22.2.2-py3-none-any.whl (2.0 MB)
|████████████████████████████████| 2.0 MB 2.3 MB/s
Installing collected packages: pip
Attempting uninstall: pip
Found existing installation: pip 20.2.3
Uninstalling pip-20.2.3:
Successfully uninstalled pip-20.2.3
Successfully installed pip-22.2.2

Is OctoPrint supposed to upgrade its pip installation at times? Is pip supposed to update itself? Are users supposed to do this manually every once in a while? I'm not sure whose responsibility it is.

tlfought · September 21, 2022, 10:49pm

These forums are great. I had exactly the same problem. Followed the instructions and I am backup and running. Time for a backup!
Thank you!

Charlie_Powell · September 21, 2022, 10:50pm

Thank you for sharing the version. If there is a pattern developing here, that would be wonderful.

There is an option in the software update to allow OctoPrint to check for updates & update pip. Pip updates are outside of our control, and they have on occasions broken stuff which is why we would never automatically suggest updating pip.

It's not something that's usually required - OctoPrint has a minimum pip version of 19.0.1 currently. If this gets increased in the future, it will let you know it needs updating. But if there is a specific version with a bug, then that's kind of unfortunate. Hopefully we can figure out what the pattern is, and figure out a better solution going forward.

@tlfought are you able to share your pip version too?