Logitech C920 HD Pro Screen Flickering

[Rav_Khangurra]

Logitech C920 HD Prol

When viewing the stream in Octoprint the image is flickering possibly due to the led lights being used in the room (not sure)

Tried different resolutions and fps didnt work. Also noticed the quality and sharpness of the image is not very good

Logs (/var/log/webcamd.log, syslog, dmesg, ... no logs, no support)

Additional information about your setup (Octopi version 0.18.0)

[PrintedWeezl]

Try the -pl option

jacksonliam/mjpg-streamer/blob/5554f42c352ecfa7edaec6fc51e507afce605a34/mjpg-streamer-experimental/plugins/input_uvc/README.md

How can I change mjpg-streamer parameters on OctoPi?

You can change that via the config file octopi.txt. You can access it in two ways: directly from the Pi: You can find the file at /boot/octopi.txt, just open it with your favorite text editor (e.g. nano), adjust it and then reboot your Pi (since the changes will only take effect at boot time) from another computer: You can plug the OctoPi SD card into a card reader of your choice and plug that into another computer and open the card there. The file can then be found directly in the root dire…