SKR mini e3 v.2 error with Octo

[PinkCube]

My printer has a SKR mini e3 v.2 board. If you first turn on the printer and then the box with Octoprint, then everything works normally. But if you first turn on the box with Octoprint, then a TMC drivers error appears.
I was advised to turn off the + 5 power on the board, but I can't find how to do it. Help!

[Charlie_Powell]

Searching the forum, reading the FAQ or finding the pinned topics about backpowering issues would have been enough

Put tape on the 5V pin - Why and how

First of all this whole tutorial isn't a mandatory mod - you just need it if you run into issues (weird things are happening and you've already ruled out the more common suspects) or if the always running fan and illuminated display (even when the printer is turned off) disturbes you. I'm starting with the why part: If you connect a 3D printer via USB to your Raspberry Pi it can lead to all sorts of power related issues. Most of the time those issues occur only if you turn on your pi before …