Hi everyone,
I'm hoping someone can help me.
I have searched the forum and can't see any similar questions
I've installed Octopi on a Pi4 and can connect to it with no problems.
I can't get Octopi to connect to my Ender 7.
I gone through all the dialogs and changed the serial port from/to "/dev/ttyUSB0" and "/tmp/printer" rebooting.
I'm getting the error "option 'serial' in section 'mcu' must be specified". I can't see that option anywhere.
Anyone help please?
What is the problem?
I've installed Octoprint on a Pi4 and can connect to it with no problems.
I can't get Octopprint to connect to me Ender 7.
I'm getting the error "option 'serial' in section 'mcu' must be specified". I can't see that option anywhere.
From the Terminal-
Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /tmp/printer, baudrate 250000
Changing monitoring state from "Opening serial connection" to "Connecting"
Connected to: Serial<id=0xac3be750, open=True>(port='/tmp/printer', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0125
Recv: ok
Send: N0 M110 N0125
Changing monitoring state from "Connecting" to "Operational"
Recv: ok
Send: N0 M110 N0125
Recv: ok
Send: N1 M11539
Recv: ok FIRMWARE_VERSION:4c8d24a FIRMWARE_NAME:Klipper
Send: M21
Recv: ok
Send: M105
Recv: ok T:0
Send: M105
What did you already try to solve it?
I've gone through all the dialogs and changed the serial port from/to "/dev/ttyUSB0" and "/tmp/printer" rebooting.
Have you tried running in safe mode?
Yes
Did running in safe mode solve the problem?
No - No difference
Systeminfo Bundle
You can download this in OctoPrint's System Information dialog ... no bundle, no support! )