Trying to get Raspberry pi Camera to work

[WauloK]

I get the following log:

Found video devices:
/dev/video0
/dev/video10
/dev/video11
USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0
<13>Feb 24 08:42:49 pi: Starting USB webcam
Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -i input_uvc.so -r 640x480 -f 10 -d /dev/video0
MJPG Streamer Version: git rev: 821c330ea6bbb5fbed98d48e00aac156e923161b
i: Using V4L2 device.: /dev/video0
i: Desired Resolution: 640 x 480
i: Frames Per Second.: 10
i: Format............: JPEG
i: TV-Norm...........: DEFAULT
UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25)
UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25)
o: www-folder-path......: ./www-octopi/
o: HTTP TCP port........: 8080
o: HTTP Listen Address..: (null)
o: username:password....: disabled
o: commands.............: disabled
libv4l2: error turning on stream: Invalid argument
Unable to start capture: Invalid argument
i: Error grabbing frames

I updated to the latest pi update using the commandline. Also tested:

$ vcgencmd get_camera
supported=1 detected=1

I used raspi-config to enable the camera.

[Ewald_Ikemann]

Hi @WauloK

A quick forum search gave these:

Pi Cam not detected by OctoPrint

What is the problem? My Pi Cam is not detected by OctoPrint. I don't think it's detected by OctoPi either, but I'm not an expert. On the Control tab, it gives the error " Webcam stream not loaded". In Settings > Webcam & Timelapse, the test gives the broken image link graphic. What did you already try to solve it? Restarted OctoPrint Restarted Raspberry Pi Tried shorter cable Made sure that the cable was firmly seated and clamped in the Pi Cam and Raspberry Pi Checked a couple of videos t…

Octopi Octoprint Pi Cam not working

What is the problem? Under the Controls tab in Octoprint the Camera only shows "Webcam Stream Loading" Raspberry Pi is a 3 B + Camera is the Pi Cam V2 with IR sensor What did you already try to solve it? Rebooting, Trying different cable between pi and pi-cam, checking that the stream URL is "/webcam/?action=stream" Read through this forum. Additional information about your setup (OctoPrint version, OctoPi version, printer, firmware, octoprint.log, serial.log or output on terminal tab, ..…

Pi camera not working

Pi camera is not loading Please help

https://community.octoprint.org/search?q=pi%20cam

[WauloK]

The red light on the camera is on. None of those links have an answer so I'll search I guess.

[Brandon_Matthews]

any update to this? i seem to be having the same issues

[PrintedWeezl]

please upload a systeminfo bundle