Get Help   Networking


Topic Replies Activity
About the Networking category 1 June 5, 2019
OctoPi WiFi/network connection troubleshooting megatopic

Got a problem getting the WiFi connection to work with your OctoPi install? First of all, read this FAQ entry that should already take care of the most common issues: If this doesn't help you, use this thread to ask …

349 February 7, 2020
Tried anybody to use TL-WN821N V2 WIFI stick? 4 April 9, 2020
Octoprint stopped working with Raspberry Pi 3 B+ 4 April 8, 2020
Raspberry pi 4 wifi not working 4 April 8, 2020
Tried Everything... Octopi Wifi Doesn't Work 7 April 8, 2020
Login after change off router 9 April 7, 2020
I use octoprint on a PC, but cannot connect form the other PC 4 April 6, 2020
Existing OctoPi-3B+ won't connect to new WiFi network 7 April 5, 2020
Octopi connection problems on rpi Zero W 6 April 4, 2020
DNS_PROBE_FINISHED_NXDOMAIN issue 5 March 29, 2020
Two internal private networks, WebUI won't work from one 5 March 29, 2020
Can only access using direct i.p address 7 March 25, 2020
CAN ssh and connect though octopi.local, but cannot connect or ping ip 4 March 27, 2020
Octopi.local wont load- not a wifi issue (good connectivity) 2 March 27, 2020
Cannot reach octoprint from PC, but can reach from another Raspberry Pi 9 March 26, 2020
Octoprint multiple instances 5 March 26, 2020
Sending STL from OpenSCAD to OctoPrint ERROR: Bad Request 10 March 23, 2020
Solved: Ender 3 Pro, Creality Silent 1.1.5, Marlin 1.1.9 Octoprint 1.4.0 Connection issues 7 March 22, 2020
Configuring Network Errors 2 March 20, 2020
Can't find the ip address on my computer 16 March 14, 2020
OctoPi losing network connection mid-print 5 March 13, 2020
Empty /boot/octopi-wpa-supplicant.txt 2 March 13, 2020
CURA 4.5 dropping API key 5 March 12, 2020
OctoPrint not controlling printer 7 March 10, 2020
IP6 running, not IP4 2 March 9, 2020
Trouble Connecting OCTOPI to Computer 4 March 9, 2020
Octopi refuses connection 29 March 8, 2020
The remote device or resource won't accept the connection 7 March 6, 2020
Issues connecting to Octoprint when connects at 2.4 ghz 25 March 3, 2020